|
Spicy LS1 Curry Build
So I picked up this zenki in April. Really clean chassis for being a NY car. Got it for a great deal. It had an freshly rebuilt SR in it and looked like this...
PS Phillip please excuse the grammar and punctuation.:axe: http://i53.tinypic.com/1zmgfhi.jpg http://i51.tinypic.com/2nbrksw.jpg http://i53.tinypic.com/2m84oq9.jpg http://i55.tinypic.com/2iikcuw.jpg http://i54.tinypic.com/15eec03.jpg http://4.bp.blogspot.com/-WEBAokCQ-n...-49-04_590.jpg http://1.bp.blogspot.com/-itKGAFi3bY...352-730604.jpg http://farm3.static.flickr.com/2086/...bed4a07c_z.jpg You can see in the last pic that something was up with that front end. The core support was slightly tweaked. The paint is in pretty good condition...no big dents or scratches. First couple of days I didn't really do anything with the car. Brought it over to a good friend's shop, Tarmac SPL. If you're from NY and you bring your 240sx to a different shop you need to stop and bring it to Damian. I hope this build thread will be a testament to the quality of his work. Damian eats, sleeps, craps 240s. Here's the car at Tarmac already looking better. https://s-hphotos-sjc1.fbcdn.net/hph..._6797216_n.jpg Got bored and cut a heart out in my bumper http://farm6.static.flickr.com/5102/...fab00f4a_z.jpg The car came with these awesome 18x7 +45 or something jdm tyte hella flush wheels. They were too awesome for my car so I decided to sell them and get in touch with Ravspec for some new wheels. Calvin's the man. He's local and always does his best to hook us up. http://farm6.static.flickr.com/5108/...9c78d181_z.jpg JDM / USDM Auto Performance Parts Wholesale - Specialized in STI, EV0, 350Z - Ravspeconline.com a week or two later we have... http://4.bp.blogspot.com/-jDg81JVATL...505-746023.jpg http://1.bp.blogspot.com/-FFrY5TTXe6...374-761170.jpg aka stop buying knock off bullshit http://farm7.static.flickr.com/6163/...da81489b_z.jpg http://farm7.static.flickr.com/6172/...010c285d_z.jpg http://4.bp.blogspot.com/-2MOO9AO9GJ...602-773079.jpg got some kics for a great deal with my wheels. http://farm6.static.flickr.com/5068/...13ebf227_z.jpg http://2.bp.blogspot.com/-sJ1G4Dea_t...366-781112.jpg This car will never be drift hellaflush so sorry fanboys. These tires are just temp rollers. I'll need traction and a whole lot of it so my next tire setup will probably be a set of semi-slicks. 275/35/18 all around most likely. Yes I will be going widebody. A friend of mine was selling his Navan setup so I scooped that up at the same time as well. Slapped it all on that night http://farm7.static.flickr.com/6154/...74607ece_z.jpg http://farm7.static.flickr.com/6159/...2b464e46_z.jpg http://farm7.static.flickr.com/6178/...84accc42_z.jpg Snapped some pics the next morning...FJ daily in the background. I love that damn thing. http://farm6.static.flickr.com/5104/...12e33d4b_b.jpg http://farm6.static.flickr.com/5069/...0c1d04fd_b.jpg http://4.bp.blogspot.com/-nflT4qAyon...-38-12_770.jpg http://farm7.static.flickr.com/6204/...d9e87634_z.jpg http://2.bp.blogspot.com/-a086eKXcKF...835-796108.jpg http://farm7.static.flickr.com/6188/...972041a4_z.jpg please excuse the POS winter beater bmw in the back The sides of the navan bumper were cracked at the mounting points so we just used some zebra tape to hold it together for now. The entire car is getting painted soon. The dirty ass engine bay started to get to me as well as the bent radiator support so we yanked the motor out and towed the car over to the HRE FAB to build me a a crash bar/rad support. http://2.bp.blogspot.com/-yBsK_7Muva...-01-15_624.jpg Austin and his dad Jim Harvey run the show over there. They can build you anything. I'll let the pictures do the talking. They're on zilvia...here's Austin's profile... #/f/members/streetz.html https://fbcdn-sphotos-a.akamaihd.net...28680052_n.jpg Hit him up if you need any sort of fabrication. If you can't get in touch with him PM me and I'll relay the message. http://www.hre.com/240sxbuild/108.jpg http://www.hre.com/240sxbuild/110.jpg THE STUD HIMSELF http://www.hre.com/240sxbuild/111.jpg http://www.hre.com/240sxbuild/114.jpg so handsome http://www.hre.com/240sxbuild/119.jpg yesss work that ish http://www.hre.com/240sxbuild/120.jpg http://www.hre.com/240sxbuild/133.jpg nice welds bro http://www.hre.com/240sxbuild/137.jpg next up was primer...you can see the headlight brackets and hood pin brackets in this pic as well http://www.hre.com/240sxbuild/142.jpg orange swag http://www.hre.com/240sxbuild/147.jpg then came paint...i could tell you the paint code but then i would have to kill you. http://www.hre.com/240sxbuild/148.jpg http://www.hre.com/240sxbuild/152.jpg http://4.bp.blogspot.com/-Yp5rhWAN1u..._4393691_n.jpg the color is insane...looks different in different lights but still so ridiculous. 600+hp RB build going into the black kouki in the background. So while Austin was busy with the front end, I was in talks with mazworx about building a sick sr20vet setup. In the meantime, Damian, like the devil was whispering in my ear about doing an LS swap. The more and more I thought about it the more it just made sense. 15k into a sr20vet motor and still worrying about blowing the motor when I beat it up. The stress wasn't worth it. LS it was. Damian was also planning on doing an LS2 swap into his beautiful S14 seen here... https://fbcdn-sphotos-a.akamaihd.net..._6027572_n.jpg https://fbcdn-sphotos-a.akamaihd.net..._1618725_n.jpg We started looking into swap kits.. One of the Tarmac customers had just picked up an LS1 for his S14 and went with the sikky kit so we were leaning towards sikky. I did some research and stumbled upon Fueled Performance's LS mount kit. Fueled Racing Performance Todd is the man. Extremely helpful and excellent customer service. For real. FP > SIKKY ALL DAY They claimed that we dont have to bang the tranny tunnel and that the motor sits lower and farther back in the car when compared to sikky. We also dont need a new sway bar! We were sold. The kits however were on backorder. FUUUUUUUUUUUUUUUU. We bought 3 and and now Tarmac is an authorized dealer for Fueled Performance mount kits. I also picked up a LS1 out of a 04 GTO and had it mildly built. I wanted to keep things as reliable as possible. I took off the valve covers to have them powder coated in wrinkle black and the coilpack brackets in white. http://4.bp.blogspot.com/-4hdanD1IY0...640-761820.jpg Then I saran wrapped the motor for extra HP. https://fbcdn-sphotos-a.akamaihd.net..._6140348_n.jpg https://fbcdn-sphotos-a.akamaihd.net..._5864892_n.jpg all three LS motors at the shop... While we waited for the mount kit to come in I started gathering parts. Here's the parts list as of yet. 2004 GTO LS1 - 24k miles M2 CNC heads [email protected] baby Comp cam - 214/224/559/567 ARP rod bolts PAC springs Manely pushrods ASP UDP MSD plug wires 160 Thermostat Melling Oil Pump Setrab 32row oil cooler 22X7.5 Custom 3.5 exhaust 7/8'' long tube headers Trust oil filter relocation kit with thermostat Griffin Radiator w/fan and shroud Setrab power steering cooler Custom cabon air box GTO T56 6spd transmission Diamond racing stage 2 clutch Diamond racing 15lb flywheel Aluminum one piece driveshaft Short throw shifter Delrin shift knob Tein he drift spec winding master coilovers Nismo power brace SPL Tension rods SPL Outer Tie Rod SPL Brake deflector Modified knuckles courtesy of Johnny 5 SPL RUCA SPL Toe rod SPL Traction rod SPL eccentric lockout Project Mu Front BBK Custom brake brackets - the Mus were off a 370z Project Mu rear rotors 300zx rear calipers Project Mu rear pads ASD Agency power braided lines Hydraulic ebrake Wilwood brake proportioning valve custom tube front end custom crash bar Spare tire delete Navan aero URAS hood vent DMAX trunk spoiler Navan tachi-s super rare driver side seat DMAX floor mats Ganananador mirrors German glass headlights Custom rear diffuser 18x9.5 Rays Gramlights Project kics neochrome lug nuts |
Very nice. I'll be watching this thread.
I'm guessing the car had a light front end collision causing the tweaked core support? |
I can careless about v8's but i vouch for Fueled Racing Kits. Todd makes great kits. lets u use your stock sway bar and fitment is great!! good choice
|
POR15'd the chassis
http://2.bp.blogspot.com/-Kudcxpc9nN...162-718262.jpg http://1.bp.blogspot.com/-zcax0-oIF8...814-715525.jpg http://1.bp.blogspot.com/-hNm9MiqIR2...380-712585.jpg http://farm7.static.flickr.com/6062/...4656daaa_z.jpg FINAAAAAAALLLY after two monhts our mount kits came in. AWESOME. We wasted no time in throwing the motors in. Can't find pics of us prepping the motor right now but I know have them somewhere. We didn't do anything special. Drain fluid, put on oil pan, put on clutch, flywheel, new slave and remote bleeder, new arp flywheel bolts and we were good to go. ITS SUPER IMPORTANT YOU CHANGE OUT YOUR SLAVE AND ADD A REMOTE BLEEDER. The stupid internal slave is a mess waiting to happen and if you have to bleed the damn thing youll have to drop the tranny and nobody wants to do all that. Picture of the clutch and flywheel for good measure http://farm7.static.flickr.com/6167/...a7e52850_z.jpg http://farm7.static.flickr.com/6177/...1b91f1c0_z.jpg http://farm7.static.flickr.com/6156/...15134382_z.jpg http://farm7.static.flickr.com/6085/...89ae9d7c_z.jpg Tarmac guru himself Damian doing quick work on taking the steering column apart. http://farm7.static.flickr.com/6165/...90e9a157_z.jpg Damian and Young mean muggin next to the prepped motor http://farm7.static.flickr.com/6151/...57d336c6_z.jpg http://farm7.static.flickr.com/6127/...887d4f92_z.jpg and in we go http://farm7.static.flickr.com/6083/...247a6d1c_z.jpg http://farm7.static.flickr.com/6123/...48f761ed_z.jpg Went in smooth as butter. Fueled kit is awesome. http://farm7.static.flickr.com/6172/...5b88c5b5_z.jpg In the meantime a RHD imported S14 came into the shop for some work. Fresh. UPS was at my house almost everyday bringing parts in. Griffin radiatior http://farm7.static.flickr.com/6156/...65d37710_z.jpg SPL arms http://farm7.static.flickr.com/6173/...832a3cf1_z.jpg PMU rear rotors http://farm7.static.flickr.com/6174/...fd703cb7_z.jpg http://farm7.static.flickr.com/6159/...96bb633c_z.jpg It was christmas everyday. http://2.bp.blogspot.com/-lSvtYDIEIp...804-710158.jpg Please excuse those arms...they're not going on this car...neither is that baby griffin...I returned it for a bigger one! I also picked up a cusco cage from obeeeewannn. Cool dude. Buy his SC! |
Subscribed! Nice work! Car is going to be SICK
|
I was about to ask when you were going to start one of these. Nice stuff!
|
LS1! hellllsss yeah!
|
looks like a ballz deep build I digg !!
|
baller parts...
|
looking good
hoping you stick this one out to the end |
Quote:
Keep up the legit work. Can't wait to see the finished product. |
Your name makes me hungry.
Your car makes me jealous. |
Quote:
msg lngth |
wow. been stalking you on fb and had no idea this was mikes old car.
|
wicked man GLWBUILD!
|
Oh hot damn,,, Looking good bro.... Love where this is heading
|
Subscribed, great work man!
|
You go through cars like nothing. Clean. I always love your builds
|
Thanks guys! Appreciate it. Tarmac SPL/HRE Fab have both played a huge part in this build. The car might belong to me but its been a collective effort. Heres a little bit of progress on Damian's S14. Ill update this post from time to time. His car is super clean. Started off has a 95 Zenki and has turned into a Vertex'd Kouki beast. The TE37s have now been sold for a new set of sick Advans. Damian's a firm believer of "do it right the first time or don't do it at all."
http://farm7.static.flickr.com/6165/...375f8a10_z.jpg He's running a LS2 motor with the FP mount kit. Awesome AN setup as well as a nice tilted rad setup. The crash bar was built by HRE and powdercoated by Action. http://farm7.static.flickr.com/6151/...364ca5c3_z.jpg http://farm7.static.flickr.com/6172/...15d56e50_z.jpg The three bars going up support the hood latch as well as the headlight brackets. http://farm7.static.flickr.com/6201/...2640bd16_b.jpg Always deep in thought...planning/designing. |
Ok back to my car!
After we dropped the motor in it was time to tackle the wiring. Jon from Tarmac and I ripped the dash out and took out the body harness. We also ripped out all climate control related equipment as well. Getting some some sun while we rip the wiring out: http://farm7.static.flickr.com/6172/...3cdcf6f2_z.jpg http://farm7.static.flickr.com/6179/...4067c43b_z.jpg http://farm7.static.flickr.com/6171/...c1b79c31_z.jpg ALL GONE. The headlight/turn signal wires were separated and extended. I'll get pics of this as soon as I can. It was super simple. Now the body harness including the fuse box is all tucked away behind the dash. We routed the alternator and starter wires as well into the car through the firewall. We still havent mounted it yet so when we do I can get better detailed pictures. Damian is also a wiring whiz and handled the engine harness... http://farm7.static.flickr.com/6071/...dc296fc0_z.jpg Can someone guess what kind of coilovers are sitting on the ground there? Here are some of the pictures from underneath the car. You cant really tell by these angles but FP kit's ground clearance is A LOT better than sikkys. The headers are built to better clear the tranny mount as well. Over all I am super happy with the quality of their product. http://farm7.static.flickr.com/6158/...2680f3ac_z.jpg http://farm7.static.flickr.com/6179/...eb09cd95_z.jpg http://farm7.static.flickr.com/6167/...ac57914c_z.jpg The long black line hanging down next to the header is the fuel line. We used about 10 feet of black teflon AN lines wrapped in DEI heat sheathing and fire proof tape. Its all -6 and goes off the stock fuel rail down to a corvette fuel filter. Looks like this... http://www.c5racer.com/catalog/images/959.jpg It has a built in fpr. This and a walboro is all you need. We mounted the fuel filter up behind the rear wheel well. Its in a tight spot but its safe up there. Ill get more pics of this later. http://farm7.static.flickr.com/6169/...73548350_z.jpg Also put on the rear suspension arms and rear brakes. Shout out to va240dude for the 300zx rear calipers and project mu brakes. Gave me a sweet deal. http://farm7.static.flickr.com/6159/...1d84d2bc_z.jpg you'll have to excuse the dirty wheel. We also started tackling some of the smaller things. 300zx 17/16 MC http://farm7.static.flickr.com/6161/...d3f31738_z.jpg Instead of dealing with cutting up my old BMC to take out the middle fitting, I brought the 300zx BMC to a local speed shop (SK Speed) and had them find me a similar external fitting. Much easier. Saves you a lot of time and stress. Jon at Tarmac did an awesome job of bending/cutting the lines to make them all fit. Mocked up this carbon fiber heat shield I picked up. http://1.bp.blogspot.com/-NGx8ABpvHg...285-763028.jpg Next up was the oil filter setup. The FP mount kit came with a sick custom moroso pan as well as 4 AN fittings. Two 120 degree fittings for underneath the car and two 90 degree fittings for the filter adapter. Originally I was planning on running this monster oil cooler through a trust oil filter block/thermostat but then decided to hold off until next season when things get warmer. I do plan on driving this car on the street until then and this monster oil cooler is just plain overkill. Its all for sale btw. http://1.bp.blogspot.com/-W_3cONJBo9...162-753367.jpg http://4.bp.blogspot.com/-0NNSVT3i72...388-767898.jpg and here is the temp setup im running now... http://1.bp.blogspot.com/-JWElKx7P1N...753-741274.jpg |
Love that!
|
So this is pretty much where the car sits right now...I just moved into Manhattan for work and wont be able to really work on my car for the next three weeks. I finished up ordering most of the little things. Car should be starting up soon!
We put the front end back on because Austin needed to mock up my front crash bar. Nothing is really bolted/lined up yet. http://farm7.static.flickr.com/6151/...d5d46cfa_z.jpg German glass headlights. http://farm7.static.flickr.com/6167/...b5c39cea_z.jpg yes you can see the numbers on the plate...car is registered under a different address. The plates will come off too...im ducting my airbox behind the openings in the bumper. I picked this airbox up and some 3 inch brake ducting to built a custom box. http://farm7.static.flickr.com/6163/...d7bf1f6c_z.jpg http://farm7.static.flickr.com/6173/...91a5d365_z.jpg http://farm7.static.flickr.com/6166/...b9b917da_z.jpg plenty of openings to build some crazy aluminum ducting...stay tuned. http://farm7.static.flickr.com/6177/...0e7d0226_z.jpg Mounted my $7 dorman awesomes overflow tank! Nomuken steeze http://farm7.static.flickr.com/6168/...a14fb524_z.jpg Tarmac's very own Mike Bike doing some ballet http://farm7.static.flickr.com/6176/...f4635f82_z.jpg And his pooch Sushi http://farm7.static.flickr.com/6154/...ceae7d9e_z.jpg straight chillllenn I bought some off road light bar mounts made for 1.5'' tubing and had Austin fab me up some fancy brackets for the radiator. http://farm7.static.flickr.com/6168/...84192234_z.jpg Then Damian climbed on top of the lift and took some pictures. http://1.bp.blogspot.com/-iBeOYHv39m...0/IMG_9234.JPG http://1.bp.blogspot.com/-vYAJbjas18...0/IMG_9251.JPG http://4.bp.blogspot.com/-VrnJVDJSNC...0/IMG_9253.JPG http://1.bp.blogspot.com/-VyrGzY6ErA...0/IMG_9256.JPG http://1.bp.blogspot.com/-Yd19SDCfdk...0/IMG_9270.JPG http://1.bp.blogspot.com/-NgYOqIknwP...0/IMG_9271.JPG and then Jon came running inside all like wtffffff look at the skyyyy http://farm7.static.flickr.com/6175/...53537b20_z.jpg http://farm7.static.flickr.com/6157/...64d43de8_z.jpg looked like everything was getting sucked into one single point. pretty cool. Austin came by and fabbed up this nasty crash bar... https://fbcdn-sphotos-a.akamaihd.net...61950995_n.jpg https://fbcdn-sphotos-a.akamaihd.net...38186713_n.jpg https://fbcdn-sphotos-a.akamaihd.net...93563071_n.jpg https://fbcdn-sphotos-a.akamaihd.net...07884450_n.jpg https://fbcdn-sphotos-a.akamaihd.net...45385353_n.jpg 680lbs? No problem. HRE FAB HRE FAB HRE FAB HRE FAB Click the link. |
dope and love the front support replacement
|
Looking good man, cant wait to see more
|
me likey likey
|
holy shit this car is gonna be sweet.
|
Olive Juice
|
Super sick build. I love where this is going. subbed!
|
Damn, another great build on Zilvia! I love it! :)
|
subscribed, wish i could start a new build
|
| All times are GMT -6. The time now is 01:49 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™