S13 Digital Climate Control - What Am I Missing?
 

I bought a DCC off of a user on here a while back and it is coming the time in my swap to begin considering everything I have to wire up.

From what I have read using articles on NICOclub and other various sites, I need things such as sun sensors and many other things. However, I'm not exactly sure what I have, nor what I'm going to be connecting it to.

Does anyone have a more comprehensive DIY for hooking up the DCC and a complete list of sensors I will need? I plan on having fully functional A/C, Heat, etc.

http://sphotos-b.xx.fbcdn.net/hphoto...77610137_n.jpg

You need the control unit, blower motor resistor, the tube with the cabin temp sensor in it, the ambient air temp sensor, sunload sensor, blend door actuator & linkage, and DCC sub harness.

The info is out there; and there are GREAT writeups with pics to help on Nico and here too IIRC. Search again. I am not the sharpest knife in the drawer and had no trouble with this mod.

Can you by chance tell me what I'm missing here from my picture?

I'm really not sure exactly what I have as far as what is needed. I basically bought this one day with the "this would look cooler than my analog setup". I've only done about 30 minutes of research on the install and wiring, but I will devote a little more time, especially if you're saying you found some nice writeups.

Thank you for your quick response!

YouTube. There is a full tutorial. Very helpful. Mine works minty.

Here are the YouTube links for anyone who searches Zilvia and wants a quick link:


Thank you guys!

Part 1:
https://www.youtube.com/watch?v=2z5_PxGAiIU

Part 2:
https://www.youtube.com/watch?v=6l-I17kg0Sk

Part 3:
https://www.youtube.com/watch?v=KVoftdGan9Q

I have not done it yet, but it's nice to know there is a tutorial out there for me.

^^^ used the youtube vids took about a hr for me with testing and everything and also deleted alot of wires miss mine will have another one someday when i get a front clip