Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum (#/f/index.php)

- Engine Tech (#/f/forumdisplay.php?f=96)

- - RB25 S1 AEM F/IC 6 Wiring Help. (#/f/showthread.php?t=677830)

darthbeobee

10-22-2020 05:25 PM

RB25 S1 AEM F/IC 6 Wiring Help.

Hello all
I've been having problem with my RB25det swap in my s13. The swap I bought came with an AEM F/IC 6 installed and tuned. I bought a new harness for the swap and tried to wire it into the new harness but the car won't start. I believe that it's an issue with the CAS wiring on the piggyback. I wired everything stock to the ecu and the car starts but runs rough. I tried rewiring the F/IC in using this guide for a RB26 https://www.aemelectronics.com/.../Nissan_Skyline_RB26... but made sure I wired everything to the correct ECU pins. Does anyone have any experience wiring one of these into a RB25?

centuryold

11-03-2020 02:59 AM

Quote:

Originally Posted by darthbeobee (Post 6397893)

Hello all
I've been having problem with my RB25det swap in my s13. The swap I bought came with an AEM F/IC 6 installed and tuned. I bought a new harness for the swap and tried to wire it into the new harness but the car won't start. I believe that it's an issue with the CAS wiring on the piggyback. I wired everything stock to the ecu and the car starts but runs rough. I tried rewiring the F/IC in using this guide for a RB26 ... but made sure I wired everything to the correct ECU pins. Does anyone have any experience wiring one of these into a RB25?

Hey, Any update on this OP? Is it solved aol username yet?

darthbeobee

11-03-2020 01:22 PM

Quote:

Originally Posted by centuryold (Post 6398746)

Hey, Any update on this OP? Is it solved yet?

Yes, it turns out that the plug for the CAS on the new harness was faulty. I got it running but still have some vacuum leaks to work out.

All times are GMT -6. The time now is 03:10 AM.