Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum (#/f/index.php)
-   S Chassis (#/f/forumdisplay.php?f=97)
-   -   Unidentifiable noise (#/f/showthread.php?t=325668)

kakashi07 06-03-2010 12:51 PM

Unidentifiable noise
 
Ok so here's the thing. I have had this noise that I have been trying to track down for a while now. It is hard to track down. I thought it was coming from under the valve cover at first. My friend insisted that it was one of my bearings saying it was my water pump bearing. I replaced the water pump and low and behold that was not it. It is a very high pitched noise that only occurs at lower RPM, typically 1-2K RPM. Its evident if I blip the throttle. I have been having a hard time trying to find any thread with symptoms similar to mine but can't so requesting help for the Nissan Noob. Oh and I have an S14 with an SR20DET. It is a notch top if that helps.

onevia drift 06-06-2010 12:59 AM

vid anywhere? sounds like my old throw out bearing noise i had... does it only when clutch is in ot out or both? What about while driving?

miravete 06-10-2010 12:07 AM

im with onevia_drift on this one.

i have a similar problema, and my mechanic said that it was my clutch throwout bearing.

when i start my car, it squeaks, but when i press the clutch it stops.

luckily its 25dllrs for my ka :)

kakashi07 06-14-2010 08:42 PM

I don't think it is the throwout bearing because it seems to come from the motor and it is not constant or at an interval. It only happens when I pass through around 2k RPM and it doesn't matter if I have the clutch pressed in or not it will make the noise. I will try to tape it but it is a very high pitched noise. After 2k RPM it is inaudible and the same for under ie. at idle.

Pandapants 06-14-2010 09:40 PM

Exhaust leak?

I LUV MY S13 06-14-2010 09:43 PM

you could be low on oil..the noise may be the valves, and when you accelerate more oil is forced into the valvetrain henceending the noise

DriftVader 06-14-2010 10:06 PM

Its a S14 Sr20det yes? Alot of them have their VCT or VVT, whatever u call it, go out. does it sound like this?

YouTube - Sr20Det VVT rattle.

sorry for the horrible vid.

miravete 06-15-2010 01:48 AM

maybe its the timing chain guide :)

CalZenki 06-15-2010 05:05 PM

I don't know if the sr20 has an idler pully on the belt sytem but if it does, check that. I've had it go out on other cars and the symptom is the same.

kakashi07 07-03-2010 08:11 PM

Ok so I know it took a bit, I've been a bit busy, but here are pics of under the valve cover and a video of the noise. Everything looked ok under the valve cover. Nothing looking like it was oil starved or anything. Also I have been trying to find this noise and I just can't. My A/C went out for a bit so I ran without the A/C belt for a while and it still made the noise so I don't think that it's the idler pulley. You can hear how the noise only shows up while I pass through that low RPM band.http://i151.photobucket.com/albums/s...7/IMG_0490.jpg http://i151.photobucket.com/albums/s...7/IMG_0491.jpg MVI_0496.mp4 video by kakashi077 - Photobucket

S14DB 07-03-2010 09:19 PM

Sounds like a vac/boost leak.

kakashi07 07-04-2010 10:30 PM

But wouldn't it make that noise all the time? Also when I boost it does not creep down at all.

S14DB 07-05-2010 01:59 AM

What is your BOV setup?

aznpoopy 07-05-2010 09:32 AM

mechanic's stethoscope. get one; use it.

kakashi07 07-05-2010 04:00 PM

Quote:

Originally Posted by aznpoopy (Post 3526463)
mechanic's stethoscope. get one; use it.

No thanks a big screwdriver works just as well and I couldn't track it down.

Quote:

Originally Posted by S14DB (Post 3526296)
What is your BOV setup?

:bowrofl:lol thanks I have a Greddy Type RS. I didn't think it could be related to that but it seems it was. I tightened the adjustment screw towards harder setting and it stopped the noise. At low RPM at least I only slightly hear it at like 6k but at that point the engine noise drowns it out lol.

aznpoopy 07-06-2010 07:49 AM

a screwdriver sucks ass even compared to a $10 stethoscope.

kakashi07 07-08-2010 01:30 AM

The only things that pisses me of is I keep getting a Juttering sound from the BOV and it almost sounds like compressor surge which worries me. On the plus though it doesn't make that high pitched noise anymore.


All times are GMT -6. The time now is 06:54 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™