Most suitable Cams for Garrett 2871.64
 

As the title states i am looking for the most suitable CAM for my 2871.64
My goal is to have the most torque as early as possible F.Y.I

My supporting mods.

"SR20Store" S14 SR notch w/58k miles (the motor was a 0 mile build)
Eagle rods
CP pistons
ACL bearings
BC 272/272 in/ex cams (WAY to BIG)
BC valves/springs/seats
RAS
Apex-i super suction kit
Tomei 555’s
CX intercooler
2-row aluminum rad
Z32 maf
OS Giken Super Single Clutch
POWER FC

Would stock cams not be ideal if you want the power low down in the rev range?

I run 260 pro cams and still find the car laggy.

JWT S3 personally. If you can, look up the GT2871 Thread, lots of helpful tips and info regarding different setups using your turbo.

For what you're trying to do I say get VTC working if it isn't already and run these Tomei 256/256 cams I have for sale.
#/f/showthread.php?t=593415
Torque will come on earlier than the S3's and are perfect cams for your injector/turbo size.

i run a GT2871r with Tomei Poncams 256/256 and a z33 6 speed and my car is not laggy what so ever

I was going to say HKS 256/264... Should be good. If available

JWT S4 cams.

I really like the tomei 256/260 with working VCT on smaller turbos.
Car is very responsive with a slightly larger turbo than the GT2867 (20g) and holds power towards 8k rpm.
No experience with JWT cams and would run as fast as possible from BC cams.