Something seems odd on my power steering high pressure line
 

I'm assuming this isnt a ka/sr high pressure hose/banjo bolt is it? You can see it goes down curves and then its bent to shit (in front of the sway bar) looping back to the steering rack. I want to replace this with an ISIS steel braided high pressure line I bought awhile back however from the pics I've seen, the braided line bolts into the banjo bolt (not replacing it) which isnt similar to the one I have. Anyone have input on what I have here or what I need in order to run the new line?

https://i.imgur.com/ineTOpb.jpg

Looks like a sohc line, and that you're missing the stock fitting piece that bolts there.

stolen from google images:
http://i79.photobucket.com/albums/j1...ps3e4312f8.jpg

Okay, that makes sense. I'll see if I can locate one. If I can't, a hydraulics shop should be able to make me up something right?

You need the connector from a non-hicas DOHC pump if you want to use the braided line. I know someone who just went through this exact situation.

Picking one up like in e1_griego's pic soon from a buddy so I should be set. thanks everyone

run a cooler while you are at it! the trans coolers from napa are inexpensive!