Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

- Chat (#/f/forumdisplay.php?f=7)

- - Maybe went overboard on SR build (#/f/showthread.php?t=366331)

Maybe went overboard on SR build

A friend suggested I post on here for my engine build & Its a S14 SR20det

here is what im working with.

Nissan s14 throttle body upgrade (NA 60mm)
Nismo engine bearings
Nismo clutch slave cylinder
Nismo stainless steel clutch line
Nismo clutch pivot fork bolt
Nismo engine/transmission mounts
Balanced & Blue printed
Custom coatings (dome & skirts)
Tomei 2.2liter stroker kit (88mm)
Tomei metal head gasket (1.2mm)
Tomei Procam camshafts (260in./260ex.)
Tomei valve springs
Tomei bronze valve guides
Tomei adjustable exhaust camshaft gear
Tomei oil cap
Tomei spark plug cover
Crower titaninum retainers
Crower stainless steel valves
Custom port & polish
Arp block/cylinder head studs
Greddy intake manifold (version 2)
Greddy oil pan
Greddy oil catch can
Greddy remote oil cooler (14 row)
Greddy oil filter relocation kit
Greddy engine pulley kit
Greddy Greddy rocker arm stoppers
Custom front mount intercooler
Custom intercooler piping
HKS bolw off valve (flat black)
HKS iron sleeves
Splitfire direct coil packs
Koyo aluminum radiator
FAL dual electric fans
Samco hose
Sard thermostat
Tomei fuel psi regulator
Bosch 1000cc fuel injectors
Power enterprise engine belts
SPEC Mini twin system(sponsorship)
Taka stainless steel turbo lines
Custom turbo outlet pipe
Tial wastegates 38mm
Full-Race turbo manifold
Forgerd performance hybrid twin scroll turbo (classified a/r)
XS engineering down pipe with catalyst converter delete
AEM EMS stand alone w/map conversion
Optima deep cycle battery
Walbro 255glph fuel pump (x2)
Swirl pot w/-AN fuel lines

Block (HKS) sleeved
http://i134.photobucket.com/albums/q...leevedSR20.jpg
http://i134.photobucket.com/albums/q...denginetop.jpg
http://i134.photobucket.com/albums/q...T/SANY0018.jpg
http://i134.photobucket.com/albums/q...T/SANY0017.jpg
http://i134.photobucket.com/albums/q...T/SANY0014.jpg

Tomei 2.2 kit
http://i134.photobucket.com/albums/q...ndconnrods.jpg
http://i134.photobucket.com/albums/q...T/CIMG3990.jpg
http://i134.photobucket.com/albums/q...T/SANY0001.jpg

Crank shaft in
http://i134.photobucket.com/albums/q...T/CIMG3989.jpg

Bottom end assembled
http://i134.photobucket.com/albums/q...R22DET/003.jpg
http://i134.photobucket.com/albums/q...R22DET/009.jpg
http://i134.photobucket.com/albums/q...R22DET/008.jpg

looking good bro, looking good

you nutsack lol
wish i could afford the tomei bottom end kit...
im stuck here slowly piecing everything together
so far i got camshafts.

cant wait to see where this goes

Fuck this makes me feel like a failure :cry:

lol that clutch is so thick.
16 plate clutch all siiick

right on man, this motor is one of the few that can be called "fully built"
looking forward to numbers.

Looks pretty damn impressive with all that Tomei stuff but then a spec clutch...

Quote:

Originally Posted by NoPho4u (Post 3865412)

Looks pretty damn impressive with all that Tomei stuff but then a spec clutch...

lololololololololololol. spending tons of money isn't impressive.

Spend 5K on some baller ass wheels

Top it off w/ some LING LONG TIRES LOL

I like spec, Plus its free through my sponsorship. I had their modified 350z version (stage 3 + w/flywheel) on this engine before I did this build. As for the rims I have these.

Super advan version 2 front are 18x9 w/+15 and rear are 18x10 w/-8. it took me awhile to get (9 1/2 months) with the custom color (D1 spec gunmetal) and size.
http://i134.photobucket.com/albums/q...r218x10top.jpg
http://i134.photobucket.com/albums/q...detopright.jpg
http://i134.photobucket.com/albums/q...yside4size.jpg
http://i134.photobucket.com/albums/q...ebysidetop.jpg
http://i134.photobucket.com/albums/q...idebyside2.jpg

I was just giving you a hard time having all this top notch stuff but then having it topped off with the weakest link tho even if it was free. Of course it's clear money isn't an issue on your choice of parts. Why not go with a reputable brand with your own money.

OS Giken
Ogura Clutch
Nimso Copper Max
Exceddy

mannn should have went with the VE head. Stock Neo VVL head will outflow the best DET heads and has no rocker arms so you can rev it to the moon and never have a problem while your rockin 280 cams stock haha!!!

Who cares? ^^^^

But nice build man, I have the same sleeves, but you must to have robbed a bank to buy all this. Looking forward to see numbers and that turbo your hiding

I like spec, its holds 1300tq and has stock pedal feel. what makes spec the weak link? Wouldn't have minded the OS Giken.....It would match the transmission gears Im going with. The Nismo has a harsh engagement and spec is all I have ever used even before the sponsorship.

Which Model Nismo are you referring to?

Also Spec clutch's are known to be budget minded american clutch which often times fail. Just do a search on here on their brand in general and you will find countless clutch's that didn't live up to their expectations.

I just felt all this money you spend on these upgrades almost goes to waste if your clutch isn't up to par.

with this much money, i'd sell the built head and go p12 head.

Seen that car on here before. What are the details on the aero?

it is your car, so if you like it that's great, i'm just not feeling the flat black, doesn't seem to be able to pull it off.

the wheels are sex.....the amount of gap between your fender and the actual rear wheel makes me want to vomit on a daily basis...throw a 1 inch spacer on there and it'll do gods of wonder....

nice fucking build man....good luck trying to blow that up...very NICE.

I have to get it resprayed again. I wanted to do a ocean blue metallic, But kinda undecided on different color. as for the car being on here before. I just signed up on here in November.

S15 conversion (orgins bumpers, fenders & custom rear panels)
S15 wide body (+20mm-f & +80mm-r)
Satin matte black paint
AB Flug carbon fiber hood
Seibon carbon fiber trunk
Kouki taillights
Locking hood pins
Hid conversion kit
Advan Super advan ver.2 rims (discontinued D1GP spec gunmetal)
BFGoodrich T/A KDW2 tires 245/18-f & 285/18-r
Rotora 6piston front big brake kit
Rotora 4piston rear big brake kit
Project Kics Neo/Chrome lug nuts (open-ended)
Project Kics 60mm extended forged lug nuts
HKS hyper exhaust system (85mm)
Rearview camera (for mirror)
Window tint

this thread is so full of win......and +1 on the ocean blue