Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum (#/f/index.php)

- Tech Talk (#/f/forumdisplay.php?f=8)

- - 350z rotor/pads/&calipers on s13 (#/f/showthread.php?t=615152)

natas240

10-15-2015 08:24 PM

350z rotor/pads/&calipers on s13

Could a 350z full brake hub setup be compatible with a simple s13 after a 5 lug conversion? Or what's the route to go after a conversion.

Sent from my iPhone using Tapatalk

MrMcgarrett

10-20-2015 12:50 AM

Yes.
You just have to drill the mounting holes on the spindles to 14mm.

natas240

10-20-2015 07:05 AM

That's it?

Sent from my iPhone using Tapatalk

Bleakley

10-20-2015 07:25 AM

Fronts bolt up by drilling the knuckle.
The 350z rear calipers' mounting points are spaced further apart than the stock 240sx/300zx calipers.

natas240

10-20-2015 07:26 AM

So 300zx calipers and rotors would be a better fit than 350z?

Sent from my iPhone using Tapatalk

Bleakley

10-20-2015 12:24 PM

For an easier and more "bolt-on" like install, the 300zx brakes are better for that, yes.

All times are GMT -6. The time now is 04:36 AM.