Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum (#/f/index.php)
-   S Chassis (#/f/forumdisplay.php?f=97)
-   -   exhaust hanger bracket (#/f/showthread.php?t=180599)

ecuastyle84 03-05-2008 03:51 PM

exhaust hanger bracket
 
ok so ive browsed though the web and through here but couldnt find what i was looking....my exhaust hanger rusted off so i figured all right i buy a new one from the dealership....when i went there i got the bracket but they didnt seem have the other piece thats attached to it shown on #1 the picture below...that piece has 4 bolts....two on the bracket shown on #3 and two on the frame shown in #2...is there any place where i can get that part or should i just say [email protected] it and just have the bracket welded on....sorry for the blurry pics...hope you understand what im talking about...thanks
http://i28.photobucket.com/albums/c2...e84/hanger.jpg
http://i28.photobucket.com/albums/c2...84/hanger2.jpg

sidewayz240 03-05-2008 06:39 PM

Exact thing happened to me, got a new hanger but was missing that piece. I found it on courtesyparts.com after a while of searching. Its in a different section then the hanger, i think it was under "rear bumper" section or something

I ended up just getting a piece of sheet metal, made a template and cut the braket out of the sheet metal, worked like a charm. That little piece was like $40 from nissan, there was no way i was paying that.

Good luck

ecuastyle84 03-05-2008 09:14 PM

Quote:

Originally Posted by sidewayz240 (Post 1879052)
Exact thing happened to me, got a new hanger but was missing that piece. I found it on courtesyparts.com after a while of searching. Its in a different section then the hanger, i think it was under "rear bumper" section or something

I ended up just getting a piece of sheet metal, made a template and cut the braket out of the sheet metal, worked like a charm. That little piece was like $40 from nissan, there was no way i was paying that.

Good luck

cool thanks for the info


All times are GMT -6. The time now is 01:13 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™