Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum (#/f/index.php)
-   S Chassis (#/f/forumdisplay.php?f=97)
-   -   S14 manual Trans into s13? (#/f/showthread.php?t=426729)

turbo please 12-27-2011 09:24 PM

S14 manual Trans into s13?
 
I'm buying a 1990 automatic 240sx this week and want to make it a 5 speed. I have a 5 speed from my blown up s14. I've been looking around for this swap but nothing. So is it possible to swap the s14 ka24de trans onto a ka24e motor? And what clutch an flywheel am I gonna have to buy?

562s13 12-27-2011 09:53 PM

trans yes.. just plug the hole on top of the bell housing. idk about the flywheel and stuff... but i think not

fliprayzin240sx 12-29-2011 03:59 PM

Actually, clutch and flywheel between all KAs are the same. Just make sure you get an S13 driveshaft since you cant use the S14 driveshaft.

Garage Life 12-29-2011 04:55 PM

yes, you can you use the S14 tranny on your single cam, however, the speed sensor is different for the speedometer. you may have to switch that out.

turbo please 12-29-2011 08:02 PM

sweet! so the s13 driveshaft will bolt right up to the s14 tranny? and i shouldnt have to get a diff from a 5 speed should i?

andrew600 12-30-2011 11:11 PM

hmmmmmmmmmm edit. nvm

fliprayzin240sx 12-31-2011 02:15 AM

Quote:

Originally Posted by turbo please (Post 4432226)
sweet! so the s13 driveshaft will bolt right up to the s14 tranny? and i shouldnt have to get a diff from a 5 speed should i?

S13 manual shaft...auto shaft wont work.

brewster240 12-31-2011 06:39 AM

Driveshaft doesn't bolt to the trans, so no it won't. It will slide in though.


All times are GMT -6. The time now is 10:51 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™