ARP flywheel bolts
 

I swapped my clutch set up and put in ARP flywheel bolts according to instructions below the recommended fsm torque spec. I torqued to 70 ft-lbs with threadlocker on the thread and lube on the head, is this correct? I'm kinda spooked because it's a fairly aggressive 6 puck with a relatively strong pressure plate. all good?

ummmmmm
https://tech.arp-bolts.com/instructions/102-2803.pdf

ik this but im saying it's below factory spec. i forgot to link it in the first post

Factory spec is for factory bolts. Follow what ARP recommends for their hardware.

Yeah agree with smoked, always use part manufacturers recommendation. That's what I did when I installed my arp flywheel bolts and have had no issues

Also. Those clutches are garbage.

Get an Ogura single plate, it will last 6x longer and not destroy it's fly wheel after 10k miles

what clutch is bad? no one has really mentioned a clutch brand yet. are you referring to the 6 puck style?

The price also reflects that. Great clutch but you are paying for the quality.

I have a Spec stage2+ and it's been great for 7 years at $400.

that's what I'm saying lol. might have to sell the car to finance real estate investment though