PB blaster or Liquid wrench
 

From your experience, which do you feel has worked better? Liquid wrench or PB blaster? I have only used liq. wrench and I feel it works well but haven't used PB and cannot compare myself.
(I didn't see a button to list Poll options...can someone help me with that?)

I have always used PB with great results. The can is only like 5 bucks.

I feel that pb blaster is the stronger penetrating fluid.

PB Blaster......

Kano Aerokroil. I get the stuff at the power plants I work at. The stuff is amazing

Ummm isnt there supposed to be a actual poll in this section?? anyways, Kroil owns all, but i use PB blaster as well. WD-40 sucks ass.

pb blaster.

When you start a new thread, there is an "additional options" section down below the smilies and shit, there is an option there as to whether or not you would like to start a poll, boiling it down to the number of options would like for your poll to have:
http://img44.imageshack.us/img44/4895/poll9tq.jpg

PHLIP - I don't get that option when I want to make a new thread in the poll section. It's odd...it only happens in this section.

^^^ Odd, because I have had that option in every section of the forum, even outside of the polls section even since before I was moderated... I would PM an admin if I were you about that.
Keep in mind, however, that your screen will not come with the juvenile handwriting on it, that belongs to me and me alone.

Liquid wrench. Pb blaster is crap compared to it. I cut open a LW can to get the last drops, before I resorted to the 2 cans of PB sitting next to me.

What a ditck..lmao... But I agree Philip....

Oddly enough I tried to add a poll to this thread and it wouldn't let me. I will try to make a new thread with a poll.

PB blaster or Liquid wrench
 

Oddly the original poster had no poll capability's. So, I made the poll.

Well hopefully he shall get his answer.... :bigok:

PB blaster! w00t

Pee Bee Blasta!

I have both in my garage and I'd definately go with PB Blaster.

PB!

It melts a cup in seconds!

Seriously though i have never used Liquid Wrench, but maybe i shall try.

What if this whole thing was just a conspiracy and adding this Penetrating fluid makes you feel like you can get the bolt loose, but really does nothing!?....dum dum dduuhhhh

i have used both. PB blast has prevailed (sp?) where the liquid wrench has faild oh so often.

PB blaster by far. I have to buy my own at work becuase my work will only supply us with liquid wrench. Another thing about liquid wrench is that I get a soar throat after using it. Does this happen to anyone else. Must be one of the chemicals they use?

i only use PB blaster now. ive used liquid wrench, wd40, and cheap alternative crap...PB by far works the best!

iv been using pb blaster for the past two years, the stuff is great, and penetrates fast

I miss PB, I wish I could get it here. I am stuck with WD40:o

+1 for PB blaster. Its fairly good at loosening bolts that have been "thread locked". I used PB blaster to unbolt my friend's old downpipe as well as my diff that was threadlocked.

PB blaster is the saving grace of my cracked knuckles

You guys should use Sea Foam! It is the new ish!