Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum (#/f/index.php)
-   Engine Tech (#/f/forumdisplay.php?f=96)
-   -   OEM Nissan Complete Engine Gasket Kit - Compatibility? (#/f/showthread.php?t=673693)

kTrainHurricane 04-26-2020 04:17 AM

OEM Nissan Complete Engine Gasket Kit - Compatibility?
 
I'm trying to find out whether or not somebody knows if the Nissan SR20det complete gasket kits are interchangeable between Redtop and Blacktop motors.

Nissan part #10101-50F25 is designated for Redtop, while #10101-50F27 is designated for Blacktop; however, some vendors/stores have one part # listed as compatible for both.

Can anybody confirm or deny for sure that the kits are the same? Thanks in advance for any help...

TheRealSy90 04-27-2020 10:47 AM

I can't think of any gasket difference between S13 Red and Black engines outside of the late Kouki blacktops using a different ecu and coolant temp sensor.

kTrainHurricane 04-27-2020 11:47 AM

Quote:

Originally Posted by TheRealSy90 (Post 6379142)
I can't think of any gasket difference between S13 Red and Black engines outside of the late Kouki blacktops using a different ecu and coolant temp sensor.

Someone else reached out and said that "the oil pickup gasket is O-ring for one, and flat gasket for the other"...but then they also went on to say that "they are interchangeable."

Sorry for the stupid question, but if that 1 gasket comes in 2 different variants, doesn't that mean it would only work properly for one motor and not both?

TheRealSy90 04-27-2020 12:15 PM

Quote:

Originally Posted by kTrainHurricane (Post 6379151)
Someone else reached out and said that "the oil pickup gasket is O-ring for one, and flat gasket for the other"...but then they also went on to say that "they are interchangeable."

Sorry for the stupid question, but if that 1 gasket comes in 2 different variants, doesn't that mean it would only work properly for one motor and not both?

It depends on which oil pickup tube you have or are going to use. The s13 pickup tube uses an o-ring, the S14/15 pickup tube uses a flat gasket. If your engine has the early s13 oil pickup tube it's recommended to upgrade it to the 14/15 pickup tube that is a better design and bolts on.
Also I believe the Kouki blacktops came with the later s14/15 pickup tube already installed, hence the different part supplied in the kit.

kTrainHurricane 04-27-2020 01:49 PM

Quote:

Originally Posted by TheRealSy90 (Post 6379155)
Also I believe the Kouki blacktops came with the later s14/15 pickup tube already installed, hence the different part supplied in the kit.

Ok, if this^ last part is the case then that makes sense...because I was under the impression that all "Blacktop" motors were S13.


All times are GMT -6. The time now is 03:28 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™