That rubber seal on S14s windshield to cowl?
 

I really need a good reference guys.

Does anyone know of a Nissan part number for the rubber seal that goes between the base of the windshield glass and the black cowl panel for the wipers? It's about 3/8" wide and about half of it slides under the cowl. Maybe another Nissan car has the same rubber piece or someone knows of an autobody trim site that might sell it by the foot? Mine's dried up and I've checked the Nissan FAST catalog, eBay, and here on Zilvia. It's not the tubular one with the whilte push clips; I can get that one. I just don't want to buy a new cowl panel just to get that piece of rubber!

Look here.

Not there...
 

Thanks for the link. It's not there. The rubber seal you see there (66822) is the one that's tubular with a series of white push clips. It seals the engine compartment between the underside hood bracing and the front edge of the cowl panel. What I need is a solid flat strip about 3/8 wide x 1/8 thick that is sandwiched between the rear edge of the cowl panel and runs the whole way across the base of the windshield glass.

Maybe other 240s don't have this and someone added it to this car. Thing is, this car was completely unmolested until I put the RB25 in it. I might have to put up a photo later.

I was actually referring to 66300M that looks like it sandwiches the upper cowl & windshield....

Go to a Nissan parts dept. with the VIN and I'm sure they will help you out.