Originally Posted by s142jzkillav10 (Post 2743646)

I'm posting it up here b/c The Poll section didn't work. It wouldn't allow me to put up a poll. If I need to delete it please notifi me and I will do so. Thank you.




I'm thinking about purchaseing Enkie RPF1's for my silver 97. I was wondering if any of you where running these and what is your offset and size.

I'm looking for 17's since I can fit a taller tire in the rear. but also wanted to go wide. 10" wide + for the rear. and 8.5 or 9 for the front.

I'm also contemplating about purchaseing 50mm wide quarter panels for the car. I like the wider look.
Your input if greatly appreciated Fellas/ Galls

http://i149.photobucket.com/albums/s...dragpix012.jpg
http://i149.photobucket.com/albums/s...dragpix014.jpg
http://i149.photobucket.com/albums/s...dragpix003.jpg

http://i149.photobucket.com/albums/s...240003-1-1.jpg
http://i149.photobucket.com/albums/s...9795240001.jpg

Originally Posted by zaquanh (Post 2745064)

those cars are so ugly

Originally Posted by s142jzkillav10 (Post 2744539)

Thanks

Those members with molded oversized quarter panels can you pleae chime in on ( how many times have you had any problems with body flexing too much and cracking where the quart. was molded ??????????

Originally Posted by 90hatchie (Post 2745461)

i havnt seen anyone mold in over fenders before
i vote pull em

Originally Posted by 90hatchie (Post 2745461)

i havnt seen anyone mold in over fenders before
i vote pull em

Originally Posted by zaquanh (Post 2745064)

those cars are so ugly

Originally Posted by Zerolift Autolab (Post 2749093)

In the RPF1 - even with the 18x10.5 +15 and a 50mm over fender
you have about 1" of space between edge of wheel and fender.
So a spacer would be required if you want a flush fit.
with a 30mm over fender it will fit better, but may still need a little bit of
spacer to make it fit flush.

Originally Posted by Zerolift Autolab (Post 2749093)

In the RPF1 - even with the 18x10.5 +15 and a 50mm over fender
you have about 1" of space between edge of wheel and fender.
So a spacer would be required if you want a flush fit.
with a 30mm over fender it will fit better, but may still need a little bit of
spacer to make it fit flush.

Originally Posted by kafanylovesme (Post 2757348)

Why the fuck would you want to fuck up those perfectly fine quarter panels for overs? Any size RPF1 will fit under stock body S14.

Originally Posted by Zerolift Autolab (Post 2749093)

In the RPF1 - even with the 18x10.5 +15 and a 50mm over fender
you have about 1" of space between edge of wheel and fender.
So a spacer would be required if you want a flush fit.
with a 30mm over fender it will fit better, but may still need a little bit of
spacer to make it fit flush.

Originally Posted by kognition (Post 2766362)

This is why i decided to make molds for 40mm overfenders. I am waiting for my Enkei NT03's to arrive right now. 18 x 9.5 +27 and 18 x 10.5 + 30. Using Hankook 275 slicks front and back. I would have gone with a 305 for the rear, but i came up on 4 sets of hardly used 275 slicks from a team i work with.

Originally Posted by s142jzkillav10 (Post 2769881)

Do you have any pictures of the molded quarter panels ??? :naughtyd::naughtyd: I would like to see how the vehicel looks:whip::whip:

Originally Posted by kognition (Post 2769893)

I will shortly. I have to have my car finished for a time attack next month. It's actually a full body kit i have been developing since last year. I'm so behind on all my work these days. Frustrating.