s13 No start "click" noise and Buzzing sound????
 

Hey guy's

Kinda new to zilvia so dont kill me. :lol:

Anyway's, ever since I Swapped out my Motor to another Ka24de Ive had this problem -Well sorta, I Would click once or twice once in a blue moon-

My Car goes "click" when you try to start the car. It sound's like the Starter engages but not turn over and it has an Odd "buzzing" sound which seem's to be coming from the firewall.

also
One Headlight work but high beams are fine.
and it's the only one that will pop up

My door chime sometime's turns to a clicking sound and my
defroster button light blinks and my Dash light dont work!


Please help!

Oh and it's a Bone Stock 91 Hatchback

you got a lot going on. my car has the same problem when im trying to start, remove you steering column and find you ignition tumbler, look for the harness that comes right off it there should be. 4 wires solder on it. push that piece inward towards your key as you turn the ignition, if that fixes your problem then thats the piece at fault.

as for the other, lemme see what i can do... pm me if you still need help

Any Idea's anyone?!?!

bad grounds causes that

the blue relay next to the battery goes bad make a jumper cable and see if your car starts then thats ur problem lol

look around for clutch interlock relay and thats what im talking about and there lots of threads showin similar issues

truth be told

if not you need a new starter... not refurbished... not used or like new

I dont have a clutch interlock relay lol. I have a slush box

I have one in my room. Ive swapped it out and still the same thing


And anyone have a diagram of all the grounds?

its ur EGI relay that is buzzing....bc of a lack of gounds....you can find all gounding locations in an FSM

maybe dead cell in your battery, borrow a finds and try to start your car.

Ive tried with jumpercables and it still does it AND I used that battery to run my camry


Where can I get a FSM? They dont show the Grounding locations in my Chiltons

Starter relay. Like what the guy said above, borrow a friend's, trace where the wire goes and see if all is plugged properly

fwi Auto tranny cars do NOT have a starter "relay"
#/f/tech-talk/114304...-location.html

someone told me to check the starter inhibitor switch. wheres that???

Just tried messing with it and it sounds like it's coming from the intake Mani?!?!

when I turn the key it "clicks" but the Buzzing sound stop's

it clicks? did you check the 100a fuse in the passenger side? mine did a similar thing with a single click...

Yeah this is lack of grounds. or maybe the starter wire that goes onto the little tab on the solenoid could be shot. or not on. I went to start my car after the swap and it would do the exact same thing,word for word and my starter signal wire(not positive if this is the right term) slipped off.

100a? where?!

I only found a 75a

My wire is good Already checked

its the one that is literally held by bolts to the fuse box. check those 75a and 100a fuses. look very closely!

Your ignition switch is wearing out and not getting a good connection when you turn the key this is a very common problem with 240's i have had 2 with the same problem i had to wiggle the key around till it started.

lol i simply just press that connector towards the key, and i complete the connection by doing so, and wa.....la car starts heheh

I knoow but I already replaced the ing switch

Anyone have a diagram of the engine bay plugs on these car's?? and could a Dirty plug be the root of all the problems?

OP has s13...they have 75A fuse, its NOT bolted down

here
Let me google that for you

you will be able to find what you need and throw that stupid Chiltons away.

For real it's a piece of crap. it has 3 car's in one book and it barely help's at all.

Oh and thank's for being a smart ass. :D
Anyway's the FSM is WAYYYYYYYYYYYYYYY better then that Chiltons Piece of crap!

My car did this and my connections wernt good enough.

....now it start's no problem wth!