300zx/ Q45 axle swap?? in a S14
 

hey guys,



I been having a hard time with this swap in my s14. im following a write and its been ok up till now. ok here the problem on the write up its saying all the parts needed and its saying I need hubs from the q45 so the axles fit since there bigger then the 240.


so I grab the whole rear hub/spindle/drum and all I didn't have the socket for the big bolt on the back to get the hub off. so this pass weekend I was going to swap everything in the 240 and the 240 calipers don't fit on the q45 stuff.


so im guess I need to remove the hub from the q45 rear that I grab. but the hub has a big nut and bolt on it do I need to cut this off to make it if in the 240 rear where the stock hub is now? know where in the writes I seen say anything about this hub having to be cut there all saying its a direct bolt iin?? anyone please help me with this cause im trying again this weekend. does this hub need to be cut im I missing something and I reading this write up wrong cause these writes don't add up to bolt on shit they claiming??


this is the write
http://forums.nicoclub.com/install-g...e-t267924.html


thanks guys