Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum (#/f/index.php)
-   S Chassis (#/f/forumdisplay.php?f=97)
-   -   s13 and s14 timing chain oil covers interchangeable? (#/f/showthread.php?t=432148)

Corey121 01-26-2012 09:01 PM

s13 and s14 timing chain oil covers interchangeable?
 
Im sorry if this has already been covered, i tried to search but when i do the screen stays white and does nothing. From what i have read the s13 and s14 ka24de blocks are the same, so are the s13 and s14 lower timing chain oil covers interchangeable?

Im have a rebuilt motor but i need a new oil pump and was going to buy one for an s14 but i have any s13 motor. Here is a link for the cover, Any help is greatly appreciated. Thanks in Advance.

http://i1.frsimg.com/images/detailed...00-70F01_1.jpg
Imported from frsports.com

Genuine OEM Nissan Front Timing Cover Oil Pump S14 240SX KA24DE

[email protected] 01-26-2012 09:08 PM

Not sure how much help I am BUT on the s14 I currently own, there was a small oil leak. Previous owner rebuilt the motor and when I finally found the leak it was at the upper timing cover right by the exhaust manifold. I noticed that the cover had a different shape (very very slight, just enough to cause the leak) so all I did was wipe it clean and put silicone on it and no leaks since then. So I guess you can use it but it might be a little off

Corey121 01-26-2012 09:13 PM

Quote:

Originally Posted by s13_kidd (Post 4483377)
Not sure how much help I am BUT on the s14 I currently own, there was a small oil leak. Previous owner rebuilt the motor and when I finally found the leak it was at the upper timing cover right by the exhaust manifold. I noticed that the cover had a different shape (very very slight, just enough to cause the leak) so all I did was wipe it clean and put silicone on it and no leaks since then. So I guess you can use it but it might be a little off

I have the cover off the motor before i rebuilt it they look the same, but its a 250 dollar part and i dont want to buy it if its not going to work. But i do appreciate the reply im sure with some silicone it would work.

Corey121 01-26-2012 09:31 PM

So i have done some more research via google.com, I found a forum from another site that says "l you have to do is remove a dowel pin from the s13 block (right side) if your using a s14 lower cover as the cover has one built into it." Post By smbonn2005 ka-t.org

So i think i figured it out i hope it helps someone else out in the future, If it does not work i will repost have i get the block back together.

Frank_Jaeger 06-23-2013 05:35 PM

I was not aware of this. Nice find!


All times are GMT -6. The time now is 03:55 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™