Tire PSI for Drifting
 

Just wondering what psi everyone runs for drifting at the track. Figured this might help get newbies started on some sort of car set up and possible have some other intermediate drivers try something new and learn something from it.

Please post up tire size, PSI used, and around how much wheel HP you're running. If you're on a stock motor, just say that. I'll start off

Front:
255/35-18
32 psi cold

Rear:
245/40-17
45 psi cold
Around 195 whp.

Might play with the psi a bit more though.

i like this idea.

when i was running my SOHC i was running:
front: Falken ziex ze 195/50/15 PSI=32
Rear: Falken ziex ze 205/50/15 PSI=55-60

DOHC:
front: Falken ziex ze 195/50/15 PSI=28-32
Rear: Falken ziex ze 205/50/15 PSI=40

i run 40 to 60 psi
ive run 90 psi
front are usually around 30some no more then 36 hot on AD07

feddies are same because they suck dick
maxxis z1 drift can handle a 50-60psi no problem at all
federal rsr did 90 all day and died of natural causes
re01r run a 40 range
ad07 rear run a 40 range
all tires in rear are in a 245-275/18 sizes.

PSI is very hard to dtermine. Many factors are involved. Track surface, temperature, Car setup, Tire Model, and the level of traction that a particular tire gives throughout the life of the tire.

Always good to start off about 5 psi that what is recommended for the tire, and then play with it throughout the track day.

Mostly its less pressure if you are not gripping well.
More pressure if its gripping too much.

Front

215/40/17 Federal 595 on 17x9.5 32 psi cold

Rear

215/40/17 Nexen 3000 on 17x9.5 37 psi cold

pretty much stock sr.

stockish kade

front:
215/45/17 30psi
rear:
215/45/17 38ish

soon be 235......gotta play w/ the settings some more....

stock KA

front 215/40-17 usually around 35psi
rear 214/45-17 usually around 40psi.


I usually don't check the pressures...I only have a tiny little gauge that sucks and is hard to maneuver between the spokes.

I always carry a tire pressure gauge with relieve valve in the car.

235/40R17 AD07 35-40 psi

235/40R18 595, RSR 30 psi

Stock SR w/ S15 turbo stock boost and FMIC

Will be trying out the Maxxis Victras soon.

-stock sr20det redtop-
front- 215/45/17 @ 28-30 PSI
rear-225/45/17 @ 38-42 PSI
(9" wide rims)FEDERAL 595's

but it DEFINETLY depends on the track, surface (smooth, rough or dirty), track temps and the track speed as well!
I have a mini air compressor that I bring with so I can adjust through the day if needed. (One one the best parts I ever bought for my car!)

back when i was using an s13 w/ falken ziex 912s,

Stock SOHC
F/R 205/50/15 40 PSI cold

Currently on my s14 w/ Federal 595s,

Redtop SR w/ boltons
F/R 215/40/17 35 PSI cold. I usually try to aim for 40-45 hot.

STOCK SR

fronts-2055016 Dunlop Z1 star specs at 35pis cold and the take down no lower than 28psi, depends how car feels.

rears- 2055016 GoodYear Eagle F1 at 40psi cold and no lower than 32psi

But it depends on tire I use, when I run Nexen on rear I put at 32psi cold so I still have grip.

Stock SR 10lbs boost

F: 235/40/17 30psi

R: 235/40/17 35psi

Federal 595

i dont really know whats best though.

stockish rb25

F: 215/40/17 federal 595 32psi (cold)
R: 235/40/17 federal 595 35psi (cold)

I drove JXN's car last event and he has a stock black-top sr

don't know front but they were federal ss-595

rear nexen n3000 235-40-17 with 40 lbs of air cold and they spun great.

All day I used like half the tyre and they spun awesomely

JXN's car aka devil's silvia(666):


stock sr
Federal 595
F: 235/40/17 30-32psi

R: 235/40/17 40-42psi <-- good smoke
Or

Nexens - cuz its free(wow-thats-a-cool-car)
R: 235/40/17 40psi
Nexens last forever, but dont grip for a dam. Good for beginners(like devin/wow-thats-a-cool-car) I suppose.

Stock Single Cam KA24

WSIR Balcony

Fronts:
-Dunlop Direzza Star Spec Z1's
-195/55/R15
-35 PSI

Rear:
-Nitto NT450's
-195/50/R15
-45 PSI

mostly stock S14 SR

Front
Falken Azenis RT615
235/40/17
32 PSI hot

Rear
Federal SS595
235/40/17
34-36 PSI hot

stock KA

front
falken rt615 235/40/17
35-37psi cold

rear
federal ss595 205/50/16
whatever the guy at city tire put in it
i think around 38-40psi cold

I had trouble initiating on balcony using a 3rd gear clutch kick ...

At the beginning of the day I was using some 205/55/16 BST radial tires at like 25-28psi (forgot to put air in after they sat in my garage) and I had no problems initiating but once I switched to my new pair of ss595s, I started having trouble and understeering.

I should've tried upping the tire pressure in the rear to 45+ :-/

kat. est 200whp

Front
yoko s.drive 225/35-17 30psi cold

rear
yoko s.drive 235/40-18 40psi cold.


im no experienced driver, but from what little experience i do have, thats what worked.

Stock KADE

Kumho Ecsta SPT

225/45/17

Front 35 psi cold
Rear 70 psi cold
----------------------

KA-T 249 wrhp

Federal 595

225/45/17

Front 35 psi cold
rear 45 psi cold

wow, after reading this thread I guess I'm going to have to step my game up this drift season. I neglect to adjust my tire pressures. Normally I just throw on the tire on the tire machine, and after sealing the bead I put them at 32ish lbs and throw them in the car. Good info

federal rear- 28psi cold
nexens rear-25psi cold

on stockish sr setup (270hp)

stock ka24de (125 hp)

When I had dunlops:

Fronts:
235/40/17 fm901 - 32 psi
235/40/17 direzza z1 - 36 psi (super grippy)

Rears:
205/50/16 direzza dz101 - 50-70 psi (only at balcony just to make smoke and make it seem like I have an SR)

- 35 - 40 psi (on rough surface like el toro, Camarillo airport)

225/45/17 - sp sport maxx- 35 psi (horse thief mile)

Stock SR20DET

Front:

Dunlop Direzza DZ101 215/40R17
35psi HOT

Rear:

Nexen N3000 215/40R17
35-40psi HOT

Stock SOHC

fronts are whatever tire, at stock pressure, 15-50-205

rears. Used tires, stock pressure, 15-50-195 on steelies. with Used tires, they are slick enough.
Running fed 535's, 205 -15 -50, I ran 40lbs

i run 25 psi rear so my tires last longer, 300hp, federals

stock ka

front 205/50/16 40psi

rear 205/45/16 60/70psi it's like drifting on glass.

SR about 350whp

front 225/45-17 bridgestone re050a pole position 35 psi


rear 235/40-18 feddies 40 psi some times run various bridgestone tires in the 225-255 range in a 17 also about 40 psi

i generally run about 35-40psi hot in the rear no matter the tire being used seems to work the best for me

Stock KA24DE. I usually run a 215/40/17 usually R compound for control. about 30 psi.
Rear, 215/50/16 federal 595ss, nexen 2000/3000 series, nankang (gay tires), and now some falkens. In the rear it is always about 40 psi. federals at 50 cause they grip new.

Run federals backwards for KA, they last all day, and don't grip as much. Tire pressure and grip is the most important in my book! Every time I test a car, that's the first thing I ask.

When I drove jxn's car (S13 SR), it was 55 psi in the rear...i was able to keep that car sliding no matter what, but it was harder to control.

FC'S (chows 250whp) usually have to have bigger tires less psi to grip...they just dont grip very well. for the front...really didn't matter.. about 35 psi so the car doesn't grip more in the front.