95 240sx over heated now won't start..
 

On my way to work My radiator hose busted. It over heated bas before I could cut it off. Replaced hose filled with water and it turns over try to start but keeps cutting out.. Water in the exhaust but none in the oil? I noticed alot of steam coming from the intake... Intake gasket maybe.. Any help would be appreciated

Sent from my SPH-D710BST using Tapatalk 2

Blown headgasket, you probably don't have any compression, or coolant is leaking everywhere in the engine

I checked the compression good across all cylinders

Sent from my SPH-D710BST using Tapatalk 2

Have you reset the ecu? I overheated once for about 10 seconds, never ran right again, turned out to be the ecu

No but it ran half assed for about a mile let of the gas n died.. Turned it over with out the plugs shot water out of the cylinders.. I just took the intake off (a bitch) The gasket broke in 4 places n the intake tunnels are soaked.. On 4 and 2. I don't think the head gasket blew

Sent from my SPH-D710BST using Tapatalk 2