Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum (#/f/index.php)
-   S Chassis (#/f/forumdisplay.php?f=97)
-   -   S14 driveshaft carrier bearing (#/f/showthread.php?t=678958)

CostFree 03-24-2021 01:32 PM

S14 driveshaft carrier bearing
 
Is the same carrier bearing used for both the manual and auto driveshafts?

Are you able to use the auto driveshaft on a 5 speed? Only asking cuz i had mine swapped years ago and need to know if its the auto or manual shaft so I can get the right part? How do i tell the difference?

Agamemnon 03-26-2021 12:56 PM

Quote:

Originally Posted by CostFree (Post 6408489)
Is the same carrier bearing used for both the manual and auto driveshafts?

Are you able to use the auto driveshaft on a 5 speed? Only asking cuz i had mine swapped years ago and need to know if its the auto or manual shaft so I can get the right part? How do i tell the difference?

The carrier bearings are different between auto and manual transmissions.

The rear portion of the drive shaft can be used on both auto or manuals but must match the differential that the car has. An S14 with ABS will have a shorter rear section due to a longer diff snout to accommodate the ABS sensor.

The front section of the drive shaft is dependent on which transmission you use.


All times are GMT -6. The time now is 07:20 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™