Signal Light's not working after tapping into switched 12v
 

I tapped into the switched 12v for the hazard button, and the turn signals quit working, I set it back to the way it was and they still do not work.

I replaced the turn signal switch unit, as well as checked the fuses with no success.

Any ideas of what actually may have broken?

https://i.ibb.co/9rmLrpG/EL1.jpg
https://i.ibb.co/MMDJYt6/EL2.jpg
https://i.ibb.co/2ZGTQwh/EL3.jpg
https://i.ibb.co/yQ94j5B/EL4.jpg

omg, I have been beating my head against the wall on this since NukeKS14's reply 2 weeks ago.

thanks for the diagram, it helped a lot, turns out the problem is with my eyes, i couldnt tell the diff between the green/white and green/yellow, got it all figured out!

Glad you stuck with it. Electrical problems are some of my least favorite to deal with and some of the most frequent on this chassis.

https://www.nicoclub.com/archives/us...-database.html

Grab an FSM for your car. They're extremely well written and very comprehensive.