Youtube Channels
 

Alright guys... who in here has a youtube channel?

Lets see what everyone is up too!!

Post a picture of your project car / daily and your youtube channel below!!


https://scontent.fsnc1-1.fna.fbcdn.n...31&oe=5AA76692

YouTube Channel :

https://www.youtube.com/channel/UCKm..._as=subscriber

I follow whoever rips the best motoring/drift tengoku videos. Hahah.

Our crew does cool fun stuff, give us a sub!

Shapeshifters Drift

Attachment 101835

#shamelessplug

Not much to look at right now, but I have big plans. Covering the whole build on my channel, picking up an engine this weekend and put a deposit on a KBD body kit.

www.youtube.com/averagebrosmedia

I've got an SR20 build. Been working on it the last year and it's running great. Drag raced it on a dry lake bed against my AWD Audi. Do you think the 240SX won? Check out the video below ;) My channel is www.youtube.com/revmatchtv

Nice channel man! Looking forward to seeing your build.

Check out our channel, We just did a quik latch install on a bn sports type 2 kit. Let us know what you guys think

Thanks man! It’s going to really get going here soon, I’m planning to put out a video this week talking about what’s planned and when everything is happening.

fpni......

Jcc0033 on youtube! Just drifting clips throughout the season so far!

https://www.youtube.com/danbrockett So much random stuff it's not even funny lol.

Subscribe @ 4wheelfunbros!

https://youtu.be/9OTsR642Yh4

Cleaning brake dust
 

I got one im building a 1jz single turbo full on big dick drift s13.
If you like be sure to sub! Arsenal of videos still to come.

https://www.youtube.com/user/joeyc850


http://i66.tinypic.com/27yahzo.jpg

Awesome videos there man, nice!

YouTube is so painful to watch with all the wanna-be Adam LZ's...

https://www.youtube.com/channel/UCMF...Bymej5DVRZbyA?

Building an RB26DETT Kouki S14
Also have a build thread in the media forum, currently waiting for approval for the build thread in the actual build section
Doing most of the body work and paint before the engine work gets done

https://i.imgur.com/sJKdnsV.jpg

Just created a new channel, trying to keep my content as pure as possible. Besides the ratchet music in this teaser:snoop:

I know it's a bit of an old thread but incase anyone is interested here's my car and my youtube which is mainly me drifting over here in the UK.

https://live.staticflickr.com/65535/...fcb8353d_b.jpgDriftcup prep and damage by Daniel Collins, on Flickr

https://live.staticflickr.com/65535/...1cf3d486_b.jpgDriftcup prep and damage by Daniel Collins, on Flickr

https://youtu.be/N0SAcHxQ0_Q

I just watched your videos and subscribed. You guys haven't uploaded a video in 9 months and I hope that changes soon.

You guys seems to be on the right track. I hope your channel gets big. I just subscribed.

Hey man, I liked your videos and I just subscribed. The only thing that you can add to this is a cam mounted on the car. It's a bit shaky if you continue using a helmet cam.

Hi all,

Yes, we've our own up as well. Videos from Japan for you.

https://www.youtube.com/user/Roughsmoke/videos

x

Hi guys,

Here's my latest video of my 700whp built ka24det:

https://youtu.be/1o054kbIGlA

Planning to do a new video each week so subscribe to keep up with the build and many other S-chassis cars in Vancouver, B.C:

https://www.youtube.com/channel/UCpx...nGS4hWcFYbL3iA

thanks,

Tariq

Im building my shitty minitruck, 1jz with s14 rear irs.

Plus have a few tutorial videos

https://www.youtube.com/channel/UC_T..._as=subscriber

Hey, check out my R33 GTR build here:

Time attack build/track videos if anyone is interested.

Started a youtube channel. Lots of Schassis content including my own 700whp S14. Check out the channel, new vids every Tuesday @ 12:00pm PST.

https://www.youtube.com/channel/UCpx..._as=subscriber

Sorry for super delayed reply! Don't come on here that often.... Thanks for subscribing, ye I think I will be trying to fit a decent cage mount for this season (whenever it starts) and also upgrading from the cheap copy Gopro to a genuine Gopro session.

Dan

https://www.youtube.com/watch?v=kzFh4EK0vek



Hey guys,

I recently just got back into vlogging since the COVID-19 pandemic and I would love to have your support!! Please give constructive criticism!! I would also love to hear your feedback and would truly appreciate the support!! Please subscribe for more content!!



and also... catch you on grid!!



https://www.youtube.com/user/TripzeyHD/

Also took the time to make a video now I have some free time, the UK is pretty near lock down at the minute. Stay home and stay safe everyone! So this is the first part of replacing my front hubs/bearings on the s14a or kouki as most of you know it.

Dan. You gotta do [] YTHD (put into the bracket) PWa1P30atzs [/YTHD] to embed.

I also did a video. I'm going to check yours out meow.

Thanks just sorted the link out, think I posted it up about midnight originally lol.

Just subscribed to your channel that video was really well edited, I hate talking on video's but it definitely makes the video more interesting to watch.

I would have gone for a gktech twin caliper on my s chassis if the import duty to the UK wasn't crazy at the time..... Ended up with a homebrew set up but it works pretty well so not too bothered.

Look forward to the next video.

Yeah man, definitely have to get over that I guess. I don?t love the talking either cause I?m usually just BSing... it helps for everything I suppose. I?d definitely recommend outlining what you want to say so you?re not just rambling about crap like 99% of these videos! I?ll subscribe too man! I appreciate it.

Ye I tried talking in parts of the next video i'm in the process of making, the second part of the wheel bearing video.... It definitely makes the video better but I find I have to rehearse what i'm going to say and then get a bit jolted lol.

All practice though! Appreciate the sub, thanks :D

I have a channel for our Blue Bayou racing videos. We drive a 240SX with a VQ30DE, aero, and Koni race suspension.
https://i.imgur.com/DZNj779l.jpg

Subscribe to my channel to see more race videos!
Blue Bayou Racing Channel

We had Randy Pobst drive our car last year and I finally finished the video for that day:



I also have a video comparing my fastest lap of the weekend to his fastest lap:

Love all of your videos.

Thanks for taking the time to put them together.

Will go through and watch all the other vids in this thread later, lots of decent stuff by the looks of it! I've just made part 2 of replacing my front wheel bearings and swapping over the extended front studs....

We raced for three hours with only 5th gear.. and I still managed to barely beat my fastest lap with the KA driving like this!

240SX Endurance Race
 

There is a crash at 4:20 in the video.. leave a comment to say who you think is at fault.

Awesome road racing footage. Randy has such unique steering style. Had the pleasure of piloting some AER teams with him over the years.

Thanks! He is so amazing at giving feedback, I'd love to get him in the car again now that I've made changes based on his feedback.

As you can see I'm trying to make my way through some of my backlog of races. Only three sprint races, and three endurance races to go before I'm current. :)

What did you guys end up changing from his feedback? He noted the car was soft, what rates/bar are you running?

knate, the Porsche could have been slightly more patient. With 2 slower cars ahead/less braking potential, so even if he "squeezed" through, he would still have to content with 1 other car further ahead going into

From the looks of it, Porsche has more straight line handling than just about anything else in shot.

Yeah, patience is a virtue....

The shocks were set too soft, not necessarily the springs. We are running 8k/6k springs on a very light car. Then running a stock bar in the rear with a Sikky sway bar up front. He suggested trying to go softer with the front bar and cranking up the shocks.

We have also since swapped for GK Tech knuckles but have not had a chance to test them. Hoping the corrected roll center will help a little mid-corner grip. We also swapped to higher friction rear brake pads to help shift the brake balance.

Totally agree, those cars had been duking it out for quite a few laps and I think it made him a little more impatient. That Porsche definitely has some speed, but that Honda is no slouch! We have 190-200whp and he would walk away from me. The Porsche has since been fully repaired and is back in action.

How light is your car?

The last weight I can find was when we were corner balancing after putting on the coilovers and with the V6. It shows 2456 lbs, which I believe was with driver and cool suit cooler, not sure how much fuel, probably 1/4-1/2 tank. We did some extensive work with the plasma cutter when building the car, it's 22-something without driver and low on fuel.

I have most of the build of the car below. I didn't think to start doing timelapse until after I had already done most of the plasma work and cage was in. You can kind of see before we put the windshield in how the A-pillar bar runs up inside the hollowed A-pillar.



When we swapped in the V6 we gained around 25 lbs if I remember correctly, although it was all from the big transmission so a little further back.

The first of two sprint races from July of last year:

Second sprint race... this one had some epic battles with the Ecotec-powered Race Invaders Miata, then ended with an epic crash!

Damnnnn didnt know there was this thread!

I've got a youtube channel too!
From the sunny island of Singapore!

https://www.youtube.com/channel/UCVZ..._as=subscriber

I ended up playing with that 1st place SN95 at the ridge last weekend -- had a GREAT session with him. We were both on RS4s and it was a pretty good cat and mouse game.

I'll restate that I love your videos and the way you edit the passes together. Only Lucky Dog videos that I ever watch.

Thanks, I appreciate it! What is done to your car and how did it compare?

Standard NRR build -- 8611s, front progress bar, 550/400 springs, all spherical, ~320whp SR, OSG rear end, 255s all around.

He'd get away from me a bit on the straights but I could reel him in through corners. It was great fun.

I went to chat with him afterwards and together we lamented RS4s lol

Wow, 320whp and he was still faster in the straight? We only have 190-200whp right now and if we go VQ35 we're still only looking at 240whp or so..

RS4s are not too bad.. much better sidewall than the floppy RS3. I am a HUGE fan of the feel of the RE71R, but we also only got about 9 hours before they were bald in areas. The precision and grip of the RE71R is amazing. The next day driving on RS4s I went off track a couple different times trying to drive them like the RE71R. However the RS4s I can get 20+ hours out of and while they don't feel nearly as good, they are not *that* much slower once you get a bunch of heat into them.

He wasn't getting me by a lot, but it was also my 3rd session ever there, I learned a lot from following him around. I chatted with him a bit and he says their car makes 350whp.

Suggest you not try the a052. They're cottamned amazing but 2 track days' worth of life lol.


I figure I'll try re71s next or maybe just do something 100tw.

Anybody following Jdm Masters? I recently started following it and have watched a lot of their videos. Just jdm car reviews, straight to the point with facts and pecs (not sure how accurate), and non of the cheesy, trynna be funny, annoying background music crap.

I also watch Craig Lieberman's videos, but only 'cause I have an obsession with tf&tf1. Some cool stories and interesting specs on some of the cars from the movies.

Another one I follow is SK8215. He built his own racecar and documented it in his channel. He didnt modified a car (like some clowns call their modified cars "built not bought"), he actually built his own chassis and body parts. He's actually running a cd009 on some mercedes v8 supercharged engine which he twin turboed instead. Guy is extremely knowledgeable in setting up suspension. He's helped me understand suspension a lot better.

My latest video, I would get a cuppa before you watch it though it's about 20mins long and I still didn't go over everything. Just a walk around of my UK comp spec drift car. Let me know what ya think, cheers!

If you ever wanted to see a slow S14 with a with an average driver go around tracks this is the channel for you:

https://www.youtube.com/channel/UCIO...S57N1h44hxLV9Q

8 Hour Endurance Race
 

We were really having to squeeze out the last drops of gas at this race! Having an 8 hour race and 2 hour maximum stints meant we needed to try go for 2 hours for each driver stint. The factory tank just isn't enough gas for 2 hours!

My latest drift comp vlog, going to try and make more of these but hopefully bit more positive next time lol. Sorry if it came over negative tried to be honest and obviously I was annoyed at myself for not doing better.

Please like and subscribe guys.

Sorry double post

Done another 2 video's since and have another one dropping tomorrow!

In Assetto:



In real life at a very wet and muddy local practice day:

I make videos every week or so. Bit of my life in Japan, bit of S15 Silvia stuff, bit of whatever else.

I make videos about motorsports spec wiring and will soon have some S13 content.

https://www.youtube.com/channel/UCcV...IDiDhJYPnh1CoQ

https://youtube.com/channel/UCF3qalXaMyvz-tACBjWpqqA

I’m trying to make videos that revolve around Japan and Cars but will slowly add more of a vloggers vibe this year as i introduce more of my life and experiences in my videos and will be covering my move to Japan next year and eventual acquiring of my first car there and the process of building it etc.

Hey dude havent seen your name in forever! Remember like 2005 and i traded you my s13 cherry red pearl ca18det for your ls400 down in hialeah at like 3am. haha

THIS GUY IS AWESOME!!!
https://www.youtube.com/channel/UCmf...bqlJchC03cintQ

Awesome videos and attention to details not seen for years is s-chassis communities.
I wonder why he is not on top of your lists yet.

Keep going my man. :bowrofl:

My latest vid, unboxing my new set of Maxpeedingrods adjustable coilovers. I will be putting a build thread up over the next few weeks with more details and a video fitting them too :hsdance:

Some long lost footage of our Oregon Raceway Park race. We had just put on coilovers with Koni race shocks (8612/8611) and the car was a blast to drive!

Put this in my build thread but it may as well go here as well.

Evening
I do all kinds of JDM content. My OG car is my 180sx. I also own 7 others including a Spirit Rei Miyabi 180sx, an s14 silvia, a few skylines and an RX7.
Here's the intro vid for my OG 180 from a while back, however at the moment I am rebuilding it into an IMSA retro supercar/cyberpunk thing haha.
Can check out the progress on the channel :) Thanks!

Whats up guys! Stop by and check out my channel if you are looking to follow a full build/restoration of my Kouki S14 from start to finish. Its going to be a clean one and I upload weekly at the very least.

https://www.youtube.com/channel/UC4B...ZcP4i4tZJLiCNQ

https://i.ibb.co/2jrC0X6/IMG-0776-1.jpg

https://i.ibb.co/7YhbkDb/IMG-0784-1.jpg