90-96 300zx Rear brake dust shield E-Brake cable mounting nut thread pitch
 

I am looking for the specs on the thread pitch for the nut that holds the e-brake cable down to the rear dust shield, I'm thinking its like a m10-1.25 or m12-1.25. Anyone have exact specs? Thank you much!!

The socket required usually tells you what size it is; I don't know off hand, but I'm pretty sure it's not that big, the z32 cable is held on by M8

Alright so M8 at the dust shield? Reason I ask is because I have a pair of rear shields, and a set of lines, but do not have the nut that bolts the rear end of the line to the shield =\. The bolt in the shield could actually be an M8 after comparing it to an m6, it is a bit larger.