Awds13
 

been posting this hog on ziptied, time to give a taste everywhere else. this is my nopi 08 competition car. ls1 s13 onevia with sexy style version 2 and ls1. i'll continue from its current state a few weeks back...

"ummm, why do these things take for fucking ever. feel like zero progress has been made on car but work on it all the goddamn time

had gas tank acid dipped, installed new fuel pump and all new o-rings/lines/whatever then truck bed lined that shit

spl arms worked out perfect, clear coils awesome can go low now :D

recaro spg's got here but no rails yet, damn justin :( haha

got gauge cluster template cut but no rice meters installed so thats just flat out pointless

made mount extension for e-brake cables (they were 300zx why didn't they jsut bolt right on? fuck.)

installed solid subframe bushings

got fuel lines all an setup

made final pulley mounts and alternator cut on motor plate mounts, this coming weekend will have actual motor inside and mounted up finally yay

oh, cool stuff

got radiator sprayer all mounted up with oil cooler as well, no more ghetto getting out of car and spraying radiator down yay

http://img.photobucket.com/albums/v3...h/CIMG2302.jpg

sweet clearance!!

http://img.photobucket.com/albums/v3...h/CIMG2294.jpg

has anybody else had to do this? seems retarded i thought they were supposed to bolt right up

http://img.photobucket.com/albums/v3...h/CIMG2321.jpg

http://img.photobucket.com/albums/v3...h/CIMG2323.jpg

http://img.photobucket.com/albums/v3...h/CIMG2331.jpg

http://img.photobucket.com/albums/v3...h/CIMG2325.jpg


slick rick, getting jazzed! but its so wierd seeing a car without fmic haha

getting so close, might hear motor sounds by end of this month!!
"




"http://img.photobucket.com/albums/v3...h/CIMG2337.jpg


:D"





"completed motor mounts finally! had to cut massive hole for alternator and still working on belt routing to get a little more contact on crank pulley

http://img.photobucket.com/albums/v3...h/CIMG2341.jpg

add some rice bits

http://img.photobucket.com/albums/v3...h/CIMG2340.jpg

and.... all the pulley setup in a much more simple version

http://img.photobucket.com/albums/v3...h/CIMG2342.jpg


those 4 -12 AN fittings are for water pump, 2 go to upper manifold on the radiator, 2 go to meziere water pump located in front of passenger wheel well"






"beginning of weekend work

http://img.photobucket.com/albums/v3...h/P3150331.jpg

didn't get other gauges in time, defi tach and kill switch are on though, fresh to death

http://img.photobucket.com/albums/v3...h/P3150334.jpg

http://img.photobucket.com/albums/v3...h/P3150336.jpg

new seat/harness/wheel/whatever combo, super cheap and legit

http://img.photobucket.com/albums/v3...h/P3150340.jpg

you know whats coming.

an hose mania! never gonna stop baby only 1/2 way there

http://img.photobucket.com/albums/v3...h/P3150342.jpg

http://img.photobucket.com/albums/v3...h/P3150345.jpg

http://img.photobucket.com/albums/v3...h/P3150347.jpg


don't ever stop in front of my car, ever. ever. spikes. stabstabstab

http://img.photobucket.com/albums/v3...h/P3150361.jpg

http://img.photobucket.com/albums/v3...h/P3150371.jpg

http://img.photobucket.com/albums/v3...h/P3150366.jpg

if you can see your bash bar through the bumper hole, you did something wrong.


rear bar is equally intense, not fucking moving. good luck if you hit my car at all, anywhere. gonna reinforce the front bar more with down diagnol pipes and shit but this is its location."






"ok so, round 2 gotta work on car more! literally just piddling with small stuff until we have a few hours to get actual motor in for its final time.

then it gets serious!


in the mean time tried to do some work today

accusump mounted

http://img.photobucket.com/albums/v3...h/P3160377.jpg

gangster lean

http://img.photobucket.com/albums/v3...h/P3160393.jpg

lol perfect positioning for the rear bar! accepting ideas for stickers to go on bar after i paint it

some that are already out there

-dimple-die cheeseburger '08
-?

http://img.photobucket.com/albums/v3...h/P3160409.jpg

http://img.photobucket.com/albums/v3...h/P3160411.jpg

dash installed, switch panel in, tach and switch panel still installed

http://img.photobucket.com/albums/v3...h/P3160413.jpg

http://img.photobucket.com/albums/v3...h/P3160417.jpg

my dad going CRAZY with regular aluminum angle

those mounts mean serious business!



so that was about mid-day or whatever and we kinda ran outta things to do on s13 for today, so we get the skyline running! new battery and such, had plans to do other stuff but hard to work when these are flying over your head...

http://img.photobucket.com/albums/v3...h/P3160436.jpg

http://img.photobucket.com/albums/v3...h/P3160442.jpg

http://img.photobucket.com/albums/v3...h/P3160445.jpg

http://img.photobucket.com/albums/v3...h/P3160447.jpg

fuck cars, brb gonna go build flying fortress replica "





"while i drove this weekend my dad laid down some kickass work on the 13!

ice water tank wrapped so it can't sweat and in-line water pump installed

http://img.photobucket.com/albums/v3...h/CIMG2803.jpg

halon fire system setup, so far only engine nozzles are bulk-headed but interior soon after seat rails get here

http://img.photobucket.com/albums/v3...h/CIMG2807.jpg

http://img.photobucket.com/albums/v3...h/CIMG2809.jpg

http://img.photobucket.com/albums/v3...h/CIMG2810.jpg

oh, i guess there's some more AN fittings or something

http://img.photobucket.com/albums/v3...h/CIMG2812.jpg

can't forget this little guy ;)

http://img.photobucket.com/albums/v3...h/CIMG2814.jpg


new belt fits and everythings good, motor in this weekend for tranny mount creation. pull it back out, rod bolts, katech oil pump, small valvetrain stuff, reinstall for good. then its typical plumbing/wiring. realistically this car is not far from done at all, getting so damn excited :)"




oh yeah EXTERIOR PICSS!!!!

http://img.photobucket.com/albums/v3...h/CIMG2018.jpg
http://img.photobucket.com/albums/v3...h/CIMG2029.jpg


GET READY NOPI!!!

http://img.photobucket.com/albums/v3...h/CIMG2345.jpg


stewartleask.com
stewartleask.com
stewartleask.com
stewartleask.com

OMG that's a whole hell of a lot of braided lines and annodized fittings! Abso-freakin-lutely insane, man! I can't wait to see this thing tearing through every gear. Get it running and post some vids ASAP!! +1 for such a clean, expensive, powerful car with those engine plates!

Man totally Badass, rediculousness lol, i really love it man keep up the good work.

i wet my pants, changed them, then wet them again

SO NICE BUILD, BUT WHAT TEH FUCK, DID ZT DECIDE TO POST THEIR SHIT HERE? HAHA.

and yes its in CAPS, BITCH.

btw we better be graced with this shit at as4

You my Friend are Crazy all I can say is WOW !!!!!!!

diamond plate.

yes.

ASB4

ATTENDANCE:

-MY s14
-MY s13
-McPatrick S13
-AARON LOSEY s13
-TYLER s14
-MCRUSSELPANTS s13
-MSR BRIAN S13

CALIFORNIA. GET READY. GET DRUNK/GET LAID/GET PAID

ls1's suck.

you should have built a turbo b16.

Wow Stu! :eek:

Now that's a baller build.

WOW TX(NO DIMPLES,EXCEPT ON YOUR ASS CHEEK) is taking over SOCAL, its gonna be called horse thief tejas after this.

Swwweaaaattttssskkkk

BALLIIIIINNNNNNN- Sick build man, love the color

holy mother of god u did the perfect car for me only thing i would change is the wing and do it in a s14. good luck with ur baby and have lots of fun

holy -AN insanity!!! You shoulda let me know before you built this thing...I woulda bought some Earl's stock lol. It looks incredible. Cant wait to see that thing dominate NOPI

Props on the Awesome build. Cant wait to see some action shots. Gotta make a sound clip when you get it all together

Ive been following your build on ziptied.....its pretty amazing.

http://img.photobucket.com/albums/v3...h/P3160436.jpg
holy shit.


....thats a good deal on t shirts.:keke:

Great build man, love the attention to detail you and your dad have on this thing. (all that work for an EDFC....thats awesome.)

your s14 will be missed!

but you might make a small furtune selling these to auto shops that work on 240sx's! they never fucken fit!
http://img.photobucket.com/albums/v3...h/CIMG2294.jpg
http://img.photobucket.com/albums/v3...h/CIMG2294.jpg

+1 mang, awesome build and attention to detail

thanks alot for compliments guys :)

s14 is still around! you will see this car at hte first 3 to 4 nopi's with her new te's and battle scars! also featuring dual 4" pipe exhaust now :)

http://img.photobucket.com/albums/v3...;20batch/3.jpg

http://img.photobucket.com/albums/v3...%20batch/3.jpg

http://img.photobucket.com/albums/v3...h/CIMG2799.jpg

Sick B17 and B24! I always go see them when thay are in town.

Love the car. I cant wait to see more!

Yeah I've been keeping an eye on this build over on ZT, one of my favs.
Very awesome job bro, I love the paintwork and the aero and fuckin LS1
Awesome to hear your old man is helping you on it too.

TEAR IT UP DAWG

shits dope.

i remember seeing a pic where the rear wheel wells were cut so far up, there was like like 7 inches of clearance from the rocker panel and the ground.

the coupe is turning out great.

keep it up!

Wow just wow!!!! your S14 was tits now this car is tits and muff,,,,Nice to see a clean onevia....silvia conversions are ghey

car is amazingly clean

and such quality... leaves me speechless

keep up the good work and don't get lazy

That is great. I cant wait to see it all done.

I dont mean to pry, but how were you able to afford all of that?

Extremely beautiful car man. Can't wait to see this car in action. Wish you the best at nopi 08'

to pay all you gotta do,

LAY THE PIPE WITH ALL THE TEENAGE CHICKS, SO THEY GIVE YOU THEIR ALLOWANCE

thats the true way to pay for this shit

ps all you need is like 15-20

you build incredible cars man. Great job on everything.

The front bumper doesnt work though, something about it doesnt look right. Meh small details to be bitching about because the rest of the car is gorgeous