HKS Exhaust Fitment
 

I just got done installing the Hi-power (65mm) exhaust on my S13. Everything went great except for the alignment. First off, the tip is sitting behind the bumper. I thought it was supposed to sit flush with it. And secondly, the exhaust is sitting offset to the left to where it's just-barely touching the bumper. I have provided pix to illustrate:

http://i111.photobucket.com/albums/n...s/DSC01146.jpg

http://i111.photobucket.com/albums/n...s/DSC01149.jpg

http://i111.photobucket.com/albums/n...s/DSC01150.jpg

http://i111.photobucket.com/albums/n...s/DSC01151.jpg

http://i111.photobucket.com/albums/n...s/DSC01152.jpg

I have yet to change out the hangers. I hope to receive (in the mail), the Circuit Sports Hangers that I ordered, either tomorrow or Saturday. I'm not really all that concerned, just want to make sure that this isn't a regular occurring problem.

If any of you with the same exhaust, or know of someone with it, PLEASE HELP! Worst comes to worse, I'll see how I can modify the hangers the push the canister to the right a bit more.

Thanks is advance!

You have an aftermarket bumper. The HKS is designed to fit in the stock location.

And Or Poor Quality aero

try bending the muffler hangers

I figured as much. I'm pretty sure it's because the exhaust sits flush with the OEM bumper. And, it being, that I have an aftermarket one, it won't reach. Well, I'm going to be adjusting the hangers tomorrow with a heat gun. Thanks you guys.

I had a similar fitment problem with this exhaust on my S13. One of the hangers (the one before the muffler) was bent 90* the wrong way. I just used a couple metal hose clamps to fix it. So who knows? It could be tweaked slightly to the left. And yeah, Im sure the aero isnt helping your case, lol.

hks exhaust always sag lower, when i had my origin kit it was perfect. but no bueno.