Two for one special. US-spec S14 Silvia K's Aero build
 

Figured I would start a build thread for this one to run alongside my S13 build (which I will move over from premie-land soon).

I had gone through my fair share of 97-98 Kouki's over the years, but never felt like I had found the right one.

Bought a '97 Kouki from New Mexico, but because of the sunroof, I decided to get rid of it and bought my current one instead.

Had it sitting like this for a while.

http://i266.photobucket.com/albums/i...d/DSCN2107.jpg

Then, found this one:

http://i266.photobucket.com/albums/i...l/DSCN2703.jpg

'97 Kouki SE, original 5-speed, and non-sunroof. Win-win for me.

I like sunroofs, but due to the age of these cars, I just feel that they'll be problematic as time goes on. Having to source replacement parts would be a pain.

Immediately swapped the coilovers and wheels onto the car.

http://i266.photobucket.com/albums/i...DSCN2713-1.jpg

http://i266.photobucket.com/albums/i...DSCN2711-1.jpg

Soon came the aero.

http://i266.photobucket.com/albums/i...l/IMG_1045.jpg

http://i266.photobucket.com/albums/i...l/IMG_1005.jpg

Mocked up the Works9 exhaust.

http://i266.photobucket.com/albums/i...l/IMG_1150.jpg

Engine has been pulled and engine bay has been cleared similar to my S13. Tubs, full exterior/engine bay respray, new undercoat, all suspension components replaced, etc.

Hopefully, I can get this one wrapped up before the end of this year as well.

Current mod list:

1997 Nissan 240sx SE - Silvia K's Aero

Rare SE Non-Sunroof model

Modifications

Exterior
JDM S14 Front Headlights
JDM S14 Front Bumper - OEM (new)
JDM S14 Front Lip - OEM (new)
JDM S14 Sideskirts - OEM (new)
USDM S14 Sideskirts - OEM (change up the look every now and then)
JDM S14 Rear Bumper (new)
JDM S14 Rear Valances
JDM S14 Spoiler
JDM S14 Grill (new)
JDM S14 Autech grill
JDM S14 Window Visors
DMAX S14 Roof Wing
HID's
LED Lighting

Interior
Safety 21 7-point cage
Bride ViosIII Low Max seats with Bride rails
Nardi Deep Corn 350MM Steering Wheel
NRG Short Hub
Works Bell Quick Release
Nismo Titanium Shift Knob
Cusco Spin Knob
LED Lighting

Suspension
Fortune Auto 500 Series Coilovers w/Swift Springs upgrade
Powered by MAX RUCA
Powered by MAX Toe Arms
Powered by MAX Traction Rods
Powered by MAX Tension Rods
Powered by MAX Uprights
Powered by MAX FLCA's
Powered by MAX Spindles
Powered by MAX Solid Subframe Bushings
Powered by MAX Steering Rack bushings
SPL Inner/Outer Tie Rods
Nismo Powerbrace
Cusco Front/Rear Strut Tower Bars
Cusco Tension Rod brace
Tanabe Swaybars F/R
ES Steering Rack Bushings

Wheels/Brakes
Blitz Type 03
18x9 +9 | 18x10 +22 | 5x114.3 (OG, not re-barreled)
Project Kics Neochrome Lug Nuts
Evo Brembo Brake Calipers Front/Rear
Z32 E-brake
Z32 1" BMC
Stainless Steel Brake Lines
Chasebays Brake Line Tuck Kit

Engine/Drivetrain
AMS Rebuilt KA24DE
Arias 8:8:1 Forged Pistons
Calico Coated Main/Rod Bearings
ARP 10MM Head Studs
ARP Main Studs
Koyo Aluminum Radiator
E-fans
RPS Max Street Clutch Kit
Fidanza Lightweight Flywheel
B&M V2 Short Shifter
DSS 1pc Steel Driveshaft
Tomei Technical Trax 2-way LSD
Powered by MAX Diff Bushings
Tomei 750cc Injectors
Garrett T3/To4e .57 Trim Turbo
Top mount manifold
HKS Front Mount Intercooler
Blitz BOV
JGS Semi Solid Motor Mounts
WORKS9 Dual Tip Exhaust
Circuit Sports Exhaust Hangers
Greddy Oil Block Adapter
Oil Cooler
Oil Filter Relocation Kit
Chasebays Power Steering kit
Chasebays Coolant Overflow

Did some organizing in my garage in preperation for the upcoming tear down.

http://i266.photobucket.com/albums/i...l/DSCN3578.jpg

Reserved for future updates.

Looking forward to some updates! I searched long and hard for my 95' Zenki SE non-sunroof that rust free in the Midwest.

Hell yeah, love where this is going. Thanks again for the sidemarker lol

good stuff man!!
Hope this build keeps progressing!
If you need stuff let me know!<3

whaaaaa i was literally thinking to myself earlier today about how i wish i knew where to see more of your 14s.
definitely sub'd!

I'll definitely keep you in mind.

I think I spent upwards of $1500 on weatherstripping and moldings alone for my S13.

I will be replacing the more worn down ones on this car as well.

Hope to see pics of your s13 on here :hide:

what size are the exhaust tips on that works9?

I'm such a blitz 03 fanboy, can't wait to own a set. Car looks awesome already.

Wow awesome find!

Don't remember off the top of my head, but the exhaust is the turbo version. I'll get some measurements as soon as I have some time.

Same here (minus the waiting to own a set).

They really grew on me over the years. I was fortunate enough to have gotten this set back from the person I sold them to right after having them refinished.

A little late with this picture.

http://i266.photobucket.com/albums/i...s/IMG_2162.jpg

In preperation for a full exterior and engine bay respray.

Debating whether to buy a matching Recaro confetti seat for this car or to just run the S15 seats.

Although the engine was rebuilt fairly recently, it unfortunately wasn't sealed properly by the previous owner. Going to take it apart and freshen it all up.

Love me some 03's. I wish I could afford 4-5 sets of wheels. I'd swap every few months.

Interested to see where this car goes now that you have a garage to keep it(the project) in.

As of now, the only wheels I'm really keeping are these Blitz 03's, my BNIB VS-XX (that I've had for like 6+ years), and a spare set of G33 wheels.

Sneak peek at my S13 which I will start a thread for soon.

http://i266.photobucket.com/albums/i...9/DSCN3549.jpg

Fuckin aye, this mofo knows how to do it. I was getting discouraged with my build but this is inspiration! Subscribed

Wow, nice car man. That lip though, I want it lol. Subscribed, I'm interested in what your going to do. Good luck with the build man.

Was just gonna say 80mm from memory, but I just took a digital caliper to my own to be sure. 80mm OD, and 77mm ID.


Been anticipating these builds for awhile now. Glad to see them underway and documented. Cool stuff man.

Glad to see a build from you, really curious to see how the s13 comes out.

Wats the plans on that s13 motor wise?

Sent from my SM-N900T using Tapatalk

Both my S13 and S14 will be KA-T.

I have quite a few parts stashed away for it.

Considered different options (usual SR swap, VQ, etc), but you rarely see clean KA engine bays (tucked wiring, emissions removed, tubs, etc).

Now that we have so many options for cleaning up the engine bay, going to do my best to make it look as "simple" as possible if that makes sense.

Wow I can't wait to see both complete gonna be sick

Sent from my SM-N900T using Tapatalk

eeee my ka long block was just finished and i'm super pumped about it.
probably shouldn't look at this thread anymore or i might quit my car.

I'm right there with you haha. I absolutely love Blitz 03's.

Had some free time this morning. Removed the dash, removed AC/Heater core/blower motor, and pressure washed it in prep for tubs.

Little before/after.

http://i266.photobucket.com/albums/i...l/DSCN3625.jpg

http://i266.photobucket.com/albums/i...l/DSCN3627.jpg

Meanwhile the car is off getting the fab work done, I'll be performing a leakdown test on the KA to make sure everything is in working order, removing the pan/front cover to reseal them properly, and modifying the intake manifold in preparation for KA-T.

subscribed! Car looks great crimson..

Subbed! Jealous of the number of kouki s14s you have owned over the years. Can't wait to see this build progress through the stages :)

updates? really love this thread

Just updated my other thread.

Been really busy with work lately, but I will be updating this with pictures soon.

:)

Subscribed.