AEM Base Map
 

Looking for a base map for a KA that is NON-turbo at the moment. Using AEM 1610 on 95 ODBI 240sx. Any help appreciated. I can also switch over to AEM MAP sensor and Air intake temp sensor if base map is avalible as I have the sensors already laying around.

Any help appriciated.

why not just get a stock ecu unless you got a ton of n/a mods to the car? I highly doubt that there are much if any one with a stock or n/a ka running an aem emu and if they did, it probably wont be as good as the stock ecu. Just my opinion.

Going turbo soon. Want to get base map up and running to get a good starting point.

Furthermore .... AEM tunes often are an improvement over the stock ECU. I also have a number of mods and more to come.

MDS SCI and blaster coil.
Cat-back
UEGO wideband
Clutch Fan delete (electric fans added)

I know its not much now but here is some what is coming soon.

http://i3.photobucket.com/albums/y54...x/240sx001.jpg

Basically .. this is to get me started on the tuning and work out bugs.

how about using your stock ecu until you install everything? Slap on aem emu afterwards, contact steve shadows about getting a base map (not free by the way, but not expensive either). Then you can try and fine tuning it yourself.

How about you let a guy in on how I can contact Steve Shadows so I can do it now like I want to? The SCI and EUGO made the car a lot more responsive and I would like to see what a tune would do for it as it is .... baseline numbers are always good.

look up steveshadows or go to the dyno faq and pm him from there. Everyone on zilvia knows (or should know) who steve shadows is.

EDIT: Also forgot he is an a vendor/advertiser for zilvia now.