s14 dual cam in an s13
 

i took out a single cam and put in a s14 dual cam. i bought a harness for a kade s13, but it was missing the interior clip (fixed) and power clips to the car (fixed), the one i cant get figured out is where it comes out after the injectors the guys cut them all... do i need a distributor and coil and stuff from an earlier year? or can i make the s14 dizy work? if so does anyone know how to wire it up?? or does anyone kno how to sire it up from where i am

http://i582.photobucket.com/albums/s...09_1935002.jpg

please help... thanks

i did the same thing to my single cam.
91-94 dual cam stuff you need: complete engine harness, intake manifold, dizzy with ignitor, and maf.
or you can go the other route and get a s14 harness but then i didn't take that route so i can help you there, sorry

yes u can make an s14 dizzy work on an s13...internal coil FTW, but ull need the s14 dizzy and s14 harness section ur missing...

find those and make the FSM ur friend...

as DALAZ_68 stated... the s14 dizzy also helps make a cleaner engine compartment as well.

Stick with mostly s13 de parts for ease of installation. that means, find all the parts a_ghost mentioned (minus s14 dizzy) and install them.

I may have the s14 dizzy/coil clip available if needed.

My 89 coupe was converted to s14 all the way... including OBDII system. Shortly after, got a ref ticket but passed even with all my internal mods.

~mario

yup yup,

just buy an s14 complete harness and cut from the last front injector...and search for the diagram...