racingdc9
01-25-2006, 09:47 AM
I'm posting this for a friend, please email him with any questions and don't post here.
turbo kit:
PT67 turbo (chrome compressor housing)
REV hard manifold (polydyne coated)
Tial wastegate
Precision Intercooler with all plumbing
Tial Blow off valve
FMU
($2500 complete ready to bolt on)
Anyone can easily install this set-up in their 240..using an FMU, the car will easily make 250hp with a stock motor..I'll even throw in the downpipe and Apex 3 inch exhaust..
Motor:
Custom intake manifold with 70mm throttle body
Fuel Rail with 96lbs injector
Head: KA24DE valves, springs, and retainer
Cometic Head gasket
JE 8.8:1 pistons
Crower Rods
($3000, motor has less than 1k miles)
Custom adapter plate for TH350 tranny (no tranny)
JW flex plate
JW Ford bell housing
Ford starter
($1000, without tranny, you can buy a cheap th350)
I can sell the whole set up plus built tranny, torque conveter and custom driveshaft for $2500, the tranny costed me $2k just to build..its good up to 1000hp, this tranny setup costed me more that $4k to customized for the 240)
The motor is solid and all the parts have less than 1000 miles..the motor will make over 550hp through a 5 speed, over 500hp thru the auto..
The only reason im selling this setup is becuase im going with a supra motor in the 240..im not in a hurry to sell, but im willing to negotiate for those that want to buy the whole set-up!!!!!!! I also have the Autronic ECU and nitrous system that i can include for someone interested in the whole set-up..
The whole setup can be yours for $10k installed!!!!!!! ONLY IF YOU"RE IN HOUSTON. you will just have to buy a few things like shifter kit, gauges, and fuel lines..
For more info and pictures of this setup
www.ka-t.org/duy.htm
duy
281-250-6996
PLEASE EMAIL W/ ANY QUESTIONS, DON'T POST HERE. [email protected]
Location is Houston. All prices don't include shipping fees.
turbo kit:
PT67 turbo (chrome compressor housing)
REV hard manifold (polydyne coated)
Tial wastegate
Precision Intercooler with all plumbing
Tial Blow off valve
FMU
($2500 complete ready to bolt on)
Anyone can easily install this set-up in their 240..using an FMU, the car will easily make 250hp with a stock motor..I'll even throw in the downpipe and Apex 3 inch exhaust..
Motor:
Custom intake manifold with 70mm throttle body
Fuel Rail with 96lbs injector
Head: KA24DE valves, springs, and retainer
Cometic Head gasket
JE 8.8:1 pistons
Crower Rods
($3000, motor has less than 1k miles)
Custom adapter plate for TH350 tranny (no tranny)
JW flex plate
JW Ford bell housing
Ford starter
($1000, without tranny, you can buy a cheap th350)
I can sell the whole set up plus built tranny, torque conveter and custom driveshaft for $2500, the tranny costed me $2k just to build..its good up to 1000hp, this tranny setup costed me more that $4k to customized for the 240)
The motor is solid and all the parts have less than 1000 miles..the motor will make over 550hp through a 5 speed, over 500hp thru the auto..
The only reason im selling this setup is becuase im going with a supra motor in the 240..im not in a hurry to sell, but im willing to negotiate for those that want to buy the whole set-up!!!!!!! I also have the Autronic ECU and nitrous system that i can include for someone interested in the whole set-up..
The whole setup can be yours for $10k installed!!!!!!! ONLY IF YOU"RE IN HOUSTON. you will just have to buy a few things like shifter kit, gauges, and fuel lines..
For more info and pictures of this setup
www.ka-t.org/duy.htm
duy
281-250-6996
PLEASE EMAIL W/ ANY QUESTIONS, DON'T POST HERE. [email protected]
Location is Houston. All prices don't include shipping fees.