Clutch Recommendations

[SilviaSR20DET]

My clutch is on its way out and Im looking for a good, reliable clutch that can handle turbo and hard driving. I would like to have the pedal feel close to stock and streetable. Anyone here have any recommendations on which brand i should get? Im assuming stage 2 is the most popular in terms of streetability and can handle turbo. My car isnt turboed yet but i have future plans to turbo my ka. im not gonna go for huge power or anything probably around the 250 hp range. ANy help will be great. thanks

[DriftKouki]

I just got a RPS sport street clutch installed last weekend and the pedal feel isnt too hard. I also had one on my 90 NA 300zx and was very satisfied with it until it got stolen.

[NemeGuero]

I love my Action clutch. 6 puck copper kevlar w/ single diaphram heavy duty pressure plate...

[lok]

I really liked my Exedy twin plate but it was overkill for my stock app. Got a deal on an ORC single only after I ordered new discs for the twin plate.

http://www.zilvia.net/f/showthread.php?t=99699

[Dousan_PG]

i have a RPS

but im getting a ORC next
drove some cars w/ a single plate orc

not heavy or stff like the RPS and holds as much/more power.

csots more but well worth the cost!

[S14DB]

Centerforce DualFriction FTW1!!


Please note that he has a KA24DE

[phreze]

I'm using an Exedy Stage 2 works great compaired to the nismo street cluth that came with my motorswap. Have heard nothing but good things about orc and if my other clutch wasn't brunt up I would have probably ordered on and waited for it.

[wootwoot]

I like ACT a lot

[kazuo]

Search...

There's seriously been like 12 thread on this same topic recently.

As far as Cali is concerned:

NorCal says ILLEGAL GARAGE
SoCal says RPS

And yes they are both great clutches.

[revat619]

I've heard nothing but good things about RPS. I've got some friends who use them and they havent had any problems. I would've gotten one, but i needed a clutch ASAP (long story...) anyway, i have a Southland sprung 4 puck with heavy duty pressure plate and i LOVE it. Southland is based right here in San Diego, so i got it in a matter of minutes. They outsource to Exedy though, so in actuallity its an Exedy clutch. Matter of fact, there was an exedy label on the box. hahaha but yeah its a great clutch. Stiffer than stock, but definitely streetable. When it grabs though, it GRABS!

[drift into a curb]

NorCal says ILLEGAL GARAGE
SoCal says RPS


Wrong, SoCal says Illegal Garage too. ;)

[!Zar!]

Illegal Garage... great bang for buck.

[quach]

+1 for illegal garage

[SilviaSR20DET]

where do you guys get these clutches? im probably gonna go for rps since i have heard they were pretty good. Anyone can suggest a site i can get rps clutches from?

[allmotorKA]

where do you guys get these clutches? im probably gonna go for rps since i have heard they were pretty good. Anyone can suggest a site i can get rps clutches from?

http://www.specialtyz.com/
http://www.splparts.com/
http://www.store.yahoo.com/phase2motorsports/

[ThatGuy]

240mm 280ZX Clutch with lightened Hardbody Flywheel

[Vatche]

my opinion is get a exedy stage 2, but if u want it to feel as close to stock with less stiff and springy get a stage 1, but stage 2 can hold about 400hp compared to the 300 hp i think the stage 1 does

[SilviaSR20DET]

oh ok great thanks guys for the opinions

[SilviaSR20DET]

has anyone experienced XTD? I saw the clutch on ebay and its a really good deal and from what i heard its the same as the exedy clutch?

[Silvia1EightySX]

where can you find a orc clutch? i have heard good things about orc. i've been searching for awhile and only found their website, in japanese of course!, and some place in australia. if not then i guess i'd go for the rps, i heard good things about that as well.