SR clutch flywheel, tranny and motor

[LOVEMUFFIN]

First up, SR20DET JUN Ultralight Flywheel with Exedy Sport Pressure Plate and 3 puck sprung, it has a couple of drift days and between 2~3k miles on it. TONS of life left in both.

http://users.adelphia.net/~projectd/3p.jpg

http://users.adelphia.net/~projectd/fw.jpg

http://users.adelphia.net/~projectd/prpl.jpg

http://users.adelphia.net/~projectd/prplth.jpg

300.00


SR20 Tranny, no second gear grind. Great condition! Nismo mount.

400.00


SOLD MOTOR

I've also got a Magnaflow cat used for like 20~30 mins to pass smog once. Welded to fit a stock 240 exhaust.

50.00


Will ship at buyers expense, email me at [email protected] AIM driftasilvia Yahoo database_ninja

[SLUG]

do you have pix of the motor?
does the motor have a wiring harness?
very interrested.

[LOVEMUFFIN]

Motor is motor only, not even the dizzy is there. I was running a reytec ems with turbo electronics then I found some stuff on the chasis I did not like so I scrapped the project. I'll take a picture of the motor today.

[Wes_s13]

will a sr20det harness and ecu work on that motor?

[LOVEMUFFIN]

Yes, but it will run like crap with 270cc injectors and no turbo. In addition to the wire harness and ECU you would need a CAS, coil packs and a MAF. If anyone comes and gets the motor you can have a spare MAF and coil packs I have. Believe it or not, it will run better using a KA24DE harness and ECU, but I don't have a dizzy for this motor, you'd have to source that too.

[DJPimpFlex]

interested in the clutch set up. PM sent. also what brand is the clutch dish itself.

[SRaznDRFTR]

i sent you an email!

-DeL

[LOVEMUFFIN]

Some people have backed out and one thing is sold. Pictures of the clutch set up added.