G-reg
12-26-2005, 09:32 PM
Just got done putting together a nearly complete turbo kit, when a great deal on an SR came along and i had to take it. So now I must sell ALL of my turbo parts.
$1800 shipped
This kit is 95% complete. All it needs is a Walbro 255 FP, (2) 2.5" couplers to connect IC to piping, and a few gaskets and bolts.
I would like to sell most of it together but will part it out if I get several people that are seriously interested in some of the parts.
Here are the parts:
Turbo-
t3/t4 w/ garrett internals.
50 trim
.63 a/r comp.
.82 a/r exhaust
has oil fittings attached(see pics)
Manifolds-
(i have 2 different...i want to sell the custom w/ tial in the kit and the Rev Hard seperatly)
Custom made cast iron manifold- fully tig welded. slotted flanges. has Tial 38mm wastegate attached by 2 welds(can cut off if necessary)
Rev Hard manifold- SOLD
Wastegate-
REAL Tial 38mm wastegate. is attached by 2 little welds to the custom manifold. also has the wastegate downpipe
Intercooler kit-
Custom made intercooler (had end tanks welded on)
25" long, 2.5" wide, 8" tall (not huge, but will get the job done)
Custom fully tig welded piping, all 2.5".
DSM bov is attached on the hot pipe and connects to the intake for easy recircualation.
Other parts:
-3" tig welded downpipe. bolts up directly to turbo. has o2 housing already tapped and flex section
-SAFC2 (black edition. Brand NEW)
-SR 370cc injectors
-Oil lines ..feed + return
-Autometer boost gauge
-Sunpro oil, amp, and water temp gauges
-Cometic head gasket(will sell seperatly because not needed for the turbo setup) 90mm / .040" Part # H1836 $75shipped
I'm asking $1800 shipped. But if no one buys it, then I will part it all out. Please don't lowball because I am in no rush to sell these items.
Post the items that you need if you do not want the complete kit.
Pics: http://community.webshots.com/user/240turbokit
Thank you, Greg
$1800 shipped
This kit is 95% complete. All it needs is a Walbro 255 FP, (2) 2.5" couplers to connect IC to piping, and a few gaskets and bolts.
I would like to sell most of it together but will part it out if I get several people that are seriously interested in some of the parts.
Here are the parts:
Turbo-
t3/t4 w/ garrett internals.
50 trim
.63 a/r comp.
.82 a/r exhaust
has oil fittings attached(see pics)
Manifolds-
(i have 2 different...i want to sell the custom w/ tial in the kit and the Rev Hard seperatly)
Custom made cast iron manifold- fully tig welded. slotted flanges. has Tial 38mm wastegate attached by 2 welds(can cut off if necessary)
Rev Hard manifold- SOLD
Wastegate-
REAL Tial 38mm wastegate. is attached by 2 little welds to the custom manifold. also has the wastegate downpipe
Intercooler kit-
Custom made intercooler (had end tanks welded on)
25" long, 2.5" wide, 8" tall (not huge, but will get the job done)
Custom fully tig welded piping, all 2.5".
DSM bov is attached on the hot pipe and connects to the intake for easy recircualation.
Other parts:
-3" tig welded downpipe. bolts up directly to turbo. has o2 housing already tapped and flex section
-SAFC2 (black edition. Brand NEW)
-SR 370cc injectors
-Oil lines ..feed + return
-Autometer boost gauge
-Sunpro oil, amp, and water temp gauges
-Cometic head gasket(will sell seperatly because not needed for the turbo setup) 90mm / .040" Part # H1836 $75shipped
I'm asking $1800 shipped. But if no one buys it, then I will part it all out. Please don't lowball because I am in no rush to sell these items.
Post the items that you need if you do not want the complete kit.
Pics: http://community.webshots.com/user/240turbokit
Thank you, Greg