PDA

View Full Version : NEW TRIXslotted & BLACK ZINC rotors/Full Brembo Brake kits from $379.00 SUPER SALE


CPARKPowertrix
12-19-2005, 01:59 PM
NEW TRIXslotted & BLACK ZINC rotors/Full Brembo Brake kits from $379.00 SUPER SALE

NEW TRIXslotted & BLACK ZINC rotors/Full Brembo Brake kits from $379.00 (special pricing for Zilvia.net members)

300zx(Z32) Brembo upgrade kits $620.00:
The 300zx calipers are remanufactured to OEM Nissan specs and include all new seals, bleeder valves, and hardware. Appearance and performance will be just like new from the factory.
http://www.powertrix.com/240brakedisplay.JPG

NEW TRIXslotted & BLACK ZINC rotors/Full Brembo Brake kits from $379.00 (special pricing for Zilvia.net members)We offer a wide variety of machining and plating to customize your order to your individual preferences and purpose.

TRIXslotted and BLACK ZINC coated rotors:
Give your 240 the JDM circuit performance look with this new style. TRIXslotted rotors give maximum initial bite and stopping power for the extreme enthusiast or racer. The black zinc will wear off the contact patch only and will become silver. The hat, edges, slots and dimples of the rotor will remain black zinc. In my opinion, the silver and black zinc combo looks very nice and in appearance and resembles the look of a 2 piece rotor.

http://www.powertrix.com/TrixSlot.jpg http://www.powertrix.com/blackzincxs.jpg

Full Kits consists of
4 rotors
2 sets of brake pads
Steel braided lines
Racing fluid

http://www.powertrix.com/300zxbrakekitdisplay.JPG

1) 4 Stock sized Zinc Coated Brembo. Your choice of drilling:
(See below for DRILLING DEFINITIONS)
All rotors are CNC machined for precision and balancing and then are Zinc coated for aesthetic appearance and to prevent rusting. (a rusted rotor will ruin the look of a nice rim and tire combo)

2) 2 Sets of PBR Metal Matrix Pads (Front and Rear):
These are the same semi metallic pads the $tillen repackages and puts their name on to sell. They create 30% less dust than stock pads.

3) Set of Steel braided lines (Front and Rear)
Made by Technafit, Steel braided lines help eliminate brake hose expansion, due to boiling fluid, which leads to a "mushy" brake pedal and eventually braid fade due to the loss in fluid pressure to the caliper. These replace and will not expand like the stock rubber brake hoses.

4) Racing Brake fluid.
The Super Blue Racing brake fluid is designed to have a higher boiling point. When conventional fluid boils, the heat causes the brake lines to expand. Bottle contain more than enough for proper bleeding of the brake system once installed.

(PACKAGE 1: STOCK 240 UPGRADE BRAKE KIT) $399.00
Kit consists of:
4 stock size drilled and slotted Zinc coated Brembo rotors
(your choice of cross drilled or dimple drilled)
2 sets of PBR Metal Matrix brake pads
Steel braided lines
Super Blue Racing brake fluid

(PACKAGE 2: 300ZX FRONT BRAKE CONVERSION KIT) $629.00
I offer a full conversion kit to install the big brakes from a Nissan 300zx twinturbo on your 240sx. The 300zx brake upgrade package for the 89-98 Nissan 240sx consists of:
300zx 4 piston 30mm aluminum calipers
300zx Brembo drilled and slotted rotors
PBR/Axis Metal Master or Ultimate Ceramic pads
Special conversion steel braided lines (to integrate the caliper to the 240sx’s brake components) and 240sx rear lines
Super Blue Racing brake fluid

(PACKAGE 3: 300ZX FULL BRAKE UPGRADE KIT) $789.00
Kit consists of :
300zx 4 piston 30mm aluminum calipers
300zx Brembo drilled, slotted and Zinc coated rotors
PBR/Axis Metal Master or Ultimate Ceramic pads
Special conversion steel braided lines (to integrate the caliper to the 240sx’s brake components)
240 stock sized Brembo drilled, slotted and Zinc coated rear rotors
240 rear pads
240 rear steel braided lines
Super Blue Racing brake fluid

If you already have the 300zx calipers,
(PACKAGE 4: SAME AS ABOVE WITHOUT CALIPERS) $435.00

INDIVIDUAL PRICING:
300zx 30mm Calipers $339.00 (pair)
300zx front rotors $134.95 (pair)
S13 or S14 front rotors $104.95 (pair)
S13 or S14 rear rotors $104.95 (pair)
PBR Metal master Pads $45.00 set (front or rear)
Axis Ultimate Pads $45.00 set (front or rear)
300zx master cylinder $119.95

ROTOR DRILLING DEFENITIONS:

The purpose of cross-drilled slotted, or dimple rotors are to dissipate heat caused by aggressive driving condition.

CROSS DRILLED: Holes are drilled through the rotor increase the surface area and to promote the dissipation of heat. It will prolong the life to the pads, rotors and improve stopping power. It also shed off water under-wet driving condition.

SLOTTED: Lines a trimmed out of the surface of the rotors to dissipate heat and increase bite. Slotted rotors will bring up the operation temperature of the braking components much faster over cross-drilled, yet it dissipates the heat at the same time. The added bite will reduce the stopping distance. Slotted rotors do not sacrifice the structural integrity of the rotor.

DIMPLED: Gives the appearance of cross-drilled rotors without sacrificing the structural integrity of the rotor. It also does not wear the pad as much as an all slotted design.

Cross-drilled/slotted or dimple/slotted will give you the best combination of performance and longevity. It will dissipate heat and increase bite for better stopping power.

The machined slot in our slotted rotors does not run over to the edge of the rotor. Slotting the rotor over the edge will weaken the structural integrity of the rotor as it creates weak points.

OTHER INFO:
Each set of rotors are custom precision CNC drilled to order, for dimple or cross-drilled and fitment for 4 and 5 lug 240s. Shipping can be from $25-$45.00 depending on the kit and destination. Kit packages can weigh 80-120lbs

ORDERING:
Please Call or Email me with:
Full Name
Shipping address
Email address
Contact Phone Number
Please specify :
if you want Crossed or Dimple Drilled rotors
and if your 240 is 4 or 5 lug.

PAYMENTS:
If using a Credit card through Paypal use [email protected] (NOTE: This is our new Business Paypal account for Credit cards and Debit cards) Please add 2.9% for Paypal fees.

If transferring from Paypal to Paypal account use [email protected] (NOTE: This account will not accept Credit Card Payments.)

Or you can send a money order to:

Powertrix
Attn: Charles Park
9450 Mira Mesa Blvd # B 447
San Diego CA 92126

Please feel free to contact me if you have any questions. [email protected]

phreze
12-19-2005, 09:59 PM
How much jest for the rotors?

that180guy
12-19-2005, 11:32 PM
if you can do that for the Q45 calipers, im most deffinently in for rotors

CPARKPowertrix
12-20-2005, 10:34 AM
How much jest for the rotors?

INDIVIDUAL PRICING:
300zx 30mm Calipers $339.00(pair)
300zx front rotors $134.95 (pair)
S13 or S14 front rotors $104.95 (pair)
S13 or S14 rear rotors $104.95 (pair)
PBR Metal master Pads $45.00 set (front or rear)
Axis Ultimate Pads $45.00 set (front or rear)
300zx master cylinder $119.95

Let us know what rotors and your zipcode is so we can calculate exact shipping costs. Thanks.

CPARKPowertrix
12-20-2005, 10:35 AM
if you can do that for the Q45 calipers, im most deffinently in for rotors

Let us know what year Q45 calipers you are looking for and we'll get pricing and availibility for you. Thanks.

that180guy
12-20-2005, 11:36 AM
91-94 calipers

thanks

anthony240
12-20-2005, 05:47 PM
hmmm, it's about time for new rotors.
are these in stock and ready to ship?

i'll get the black zinc, slotted only
and i'll just send a money order.
thanks

vw_nissan
12-20-2005, 07:30 PM
So these calipers are used, but has been rebuilt?

Prices include shipping right?

CPARKPowertrix
12-21-2005, 10:41 AM
So these calipers are used, but has been rebuilt?

Prices include shipping right?

The calipers are OEM remanufactured units and are rebuilt to factory specs. They will look and perform as new. New calipers from Nissan can cost $400+ per caliper.

From original post: "Shipping can be from $25-$45.00 depending on the kit and destination. Kit packages can weigh 80-120lbs"

Thanks for the inquiry.

andrewmp6
12-26-2005, 02:59 PM
see if you can get the rear z32 brakes too that would be nice

BlazedGlory
01-01-2006, 06:23 PM
Does anyone have any input on these products? I'm personally thinking about getting the full upgrade kit...

Thanks...

CPARKPowertrix
01-03-2006, 10:56 AM
Does anyone have any input on these products? I'm personally thinking about getting the full upgrade kit...

Thanks...

Hello, here are a couple of older threads on the same exact products. We have been providing these kits to the members of Zilvia.net for the past 3-4 years with great results.

http://www.zilvia.net/f/showthread.php?t=61077

http://www.zilvia.net/f/showthread.php?t=79935

Please let us know if you have any further questions.

kaotic
01-04-2006, 12:52 AM
who makes the lines for the stock upgrade kit?? ive got a friend in town with an 86 who got some lines off ebay and they started to leek at the ends..

shipping for full stock 91-94 upgrade to 89146

BlazedGlory
01-05-2006, 06:53 PM
Shipping request for package 3 (full 300zx upgrade) to 30114 (Canton, GA).

Also, what pads come for the rear?

BlazedGlory
01-05-2006, 09:25 PM
Sorry, also a price for rear rotors and lines only to 30114

Thanks

BlazedGlory
01-08-2006, 07:02 PM
email sent, still no reply?

Is this buy still going on?

Thanks

Edgar
01-08-2006, 07:28 PM
Can you get stuff for other applications?

BlazedGlory
01-09-2006, 07:09 PM
still nothing?

This is my last bump for a non-responsive seller =/

CPARKPowertrix
01-09-2006, 08:14 PM
still nothing?

This is my last bump for a non-responsive seller =/

Gentlemen,

Our apologies for not getting back to you sooner. The holidays has made business crazy busy and we are just catching up with all of our orders and emails.

We will follow up promptly via PM or direct email. The best of the two ways to get a hold of us is via email: [email protected], as we do not get the chance to check pms as much as we would like. Also, you can call us at 858-566-6065 or you can also reach me on my moblie phone at 619-944-6055 if I am not in the office.

Thank you all for your inquires.

CPARKPowertrix
01-09-2006, 08:17 PM
Can you get stuff for other applications?

Yes, we can get most japanese and european applications including some domestics. Please feel free to email us your application. and we provide pricing and availibility for you.

CPARKPowertrix
01-09-2006, 08:26 PM
who makes the lines for the stock upgrade kit?? ive got a friend in town with an 86 who got some lines off ebay and they started to leek at the ends..

shipping for full stock 91-94 upgrade to 89146

The lines are made for us by Technifit. They are one of the leaders in the highest quality steel braided Teflon lines and feature swivel end for ease of install and have a protective covering to extend the life of the line and protect it from automotive fluids and outside elements. Rest assured you with be recieving all top quality components with all of our kits.

CPARKPowertrix
01-09-2006, 08:28 PM
see if you can get the rear z32 brakes too that would be nice

Yes, we can provide you with the z32 rear calipers, rotors, pads and conversion lines.

fbi_ethan
04-26-2006, 06:24 AM
sorry, i know you have posted this groupbuy several times, but I still have a question if I keep the s14 couldI just get the steel braided lines, and if i instal them would it work or do z32 and s14 have different braking lines?

Helghast
04-26-2006, 07:26 AM
you'd have to buy conversion lines . . .

do your research and don't bump old threads!

LAME.

kaotic
04-26-2006, 08:47 AM
bump for a great brake kit..

i picked up the stock upgrade kit, and it made a huge difference.. great breaks!

ReLevent1
04-27-2006, 10:51 PM
if you guys can get some 4 lug q45 rotors made i'd probly be down if the price is right

Ricks15
04-28-2006, 12:01 AM
Have the E-brake cable, and MC that would help a lot of people with S13.

BlackS14
04-28-2006, 08:06 AM
Do you not sell the 26mm rotors?

If so...what would a pair of those cost...along with stock rears, your lines and Axxis Ultimates for f&r?

-Bill

s13rymos
05-12-2006, 06:35 AM
Is this GB still going on?? I sent a pm a few days ago but still no response.

drifter_for_life06
05-12-2006, 07:12 AM
how long will this GB be in progress? I'm in desperate need of new brakes and cant afford anything until after i graduate; which is june 7th.

Thanks

Ryan

evil_tt
05-12-2006, 12:42 PM
These kits dont come with the Master Cylinder?

VROOOM
05-12-2006, 01:28 PM
Is this GB still going on?? I sent a pm a few days ago but still no response.

I sent a PM and an email a week ago and have not heard anything from them. i have cash in hand and really want to buy these.

DRIFTING_SIL_EIGHTY
05-12-2006, 06:32 PM
met him a few weeks back. he hasnt really been on here he said. a lot of his stuff is on back order (well as far as suspension stuff). if you really wanna get a hold of him you can find him on twinturbo.net. besides that just try emailing him and wait for a reply. ill see if i still have his number and ill give him a call.

deep in silvia
05-24-2006, 02:19 PM
can you send me a price for a set ( front and rear) of z32 26mm Cross-drilled/slotted rotors 5 lug .

RacerAV
05-25-2006, 12:27 PM
total price of rear rotors, black zinc, dimpled and sloted, stock size, for my 98 240sx shipped to 28306? thanks!
Adamo
please PM me with teh info!

DJ_Sunrise
05-26-2006, 02:47 PM
hey, hope u get this intime as i will need new rotors and pads asap.. price for zinc coated dimpled and slotted rotor package(#1?) shipped to 08648?

-Bart

kaotic
05-28-2006, 01:17 AM
from what i know.. this isnt a group buy.. its an open buy..

my first full day of drifting and zero fade the entire day.. and it was hott!!

another bump for a great brake setup (im cheating..i know)

fbi_ethan
06-04-2006, 11:02 PM
hi, i interested in stock SS lines for stock s14 shipped to 93107 or 91214

surukis14
09-19-2006, 09:59 PM
i need front na z32 rotors from the 1990 ones. let me know shipped to 94404

chris300zr
09-19-2006, 10:04 PM
interested in the brembo slotted for the z32 fronts and the front s/s conversion lines... shipping is to zip 77054. Thanks

racerx1222
09-23-2006, 09:26 PM
I noticed Charles hasn't been posting on this in a while. The best way to contact him is probably through his email address [email protected] Charles is a great guy. He came through for me with parts for my Z32. Great customer service and pricing on all the stuff he sells. Thanks again Charles the Z32 should be done pretty soon.

withy
09-24-2006, 10:02 PM
just curious if these could come powdercoated in red and white?

S14Tiger
11-01-2006, 11:05 AM
these brakes are always for sale right? he said he's been selling them to this fourm for about 3-4 years now, so i'm guessing he's always got them in stock?