krustindumm
12-18-2005, 07:27 PM
1990 S13 Coupe in Cedar Rapids, IA
engine:
-95 KA24DE swap
-OBX header
-ebay intake
-removed emissions
-uncut engine harness with both zenki & kouki body harness plugs
-unopened ECM
-just replaced hoses, all gaskets, water pump, thermostat, and timing chain
-new aluminum radiator (lifetime warranty)
-S13 Cams
-ARP head studs
-new battery/belts this summer when the engine was installed
drivetrain:
-welded differential
-newer stock clutch (installed this summer)
-new 300zx master cylinder
-new 300zx clutch slave cylinder
suspension
KYB AGX adjustable struts
KGMM Supersport lowering springs
interior
Pioneer CD player (correctly installed, fuck people who cut the stock wiring)
Pioneer OEM sized speakers all around
cobra radar/laser detector hard wired in
Tom Motorsport oil pressure & water temp gauge (oil pressure not hooked up yet, including sandwich adaptor for it)
Custom gauge plate with 2 switches & indicators, solid 1/8" aluminum
exterior/visual
35% window tint on back 5
4->5 lug adaptors, 34mm thick
15x7 enkie wheels, +32mm offset
problems:
minor rust in left rear corner
no antenna, but will include one, may install it if i have time
can't align, eccentrics siezed, drives straight, doesn't seem to wear tires fast (by itself)
with some weight in the back, it gets around in the snow pretty well.
offer?
engine:
-95 KA24DE swap
-OBX header
-ebay intake
-removed emissions
-uncut engine harness with both zenki & kouki body harness plugs
-unopened ECM
-just replaced hoses, all gaskets, water pump, thermostat, and timing chain
-new aluminum radiator (lifetime warranty)
-S13 Cams
-ARP head studs
-new battery/belts this summer when the engine was installed
drivetrain:
-welded differential
-newer stock clutch (installed this summer)
-new 300zx master cylinder
-new 300zx clutch slave cylinder
suspension
KYB AGX adjustable struts
KGMM Supersport lowering springs
interior
Pioneer CD player (correctly installed, fuck people who cut the stock wiring)
Pioneer OEM sized speakers all around
cobra radar/laser detector hard wired in
Tom Motorsport oil pressure & water temp gauge (oil pressure not hooked up yet, including sandwich adaptor for it)
Custom gauge plate with 2 switches & indicators, solid 1/8" aluminum
exterior/visual
35% window tint on back 5
4->5 lug adaptors, 34mm thick
15x7 enkie wheels, +32mm offset
problems:
minor rust in left rear corner
no antenna, but will include one, may install it if i have time
can't align, eccentrics siezed, drives straight, doesn't seem to wear tires fast (by itself)
with some weight in the back, it gets around in the snow pretty well.
offer?