crazy9ceguy
12-17-2005, 12:41 AM
ok so today i finished installing eveyrhting on my motor. 555cc injectors, hks gt2530, enthalpy tuned ecu for my s13 blacktop. no when i wired the z32 maf, i used the phase2 harness, it has a long brown wire, im guessing for chassi ground? but enthalpy doesnt recommend using that. so i wire it up, but two of the wires had no color, so we went and did a continuity test from the harness plug inside the cabin. then when i went to start the car, the car just crank, but wont start. i dont hear the clicking noise the ecu usually makes to turn on the fuel pump. Then i smell a burning inside the ecu, im guessing its enthalpy's soldering .
So now, many of you will think that my ecu is fried, but nope! i tried my ecu on my friends s13 and it works perfectly. So now my question is, what can be wrong? why wont the car start? what caused it?
So now, many of you will think that my ecu is fried, but nope! i tried my ecu on my friends s13 and it works perfectly. So now my question is, what can be wrong? why wont the car start? what caused it?