clutch disk analysis, - pics

[jt1583]

hows my clutch disk look, only been driven on for ~200 miles, only thing i can notice is the inner .5 cm ring looks more worn then the rest of the disk. does it look normal? any input welcome!

http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTE1MjM4MjZzNDEzZGZkMzF5NTQx.jpg

[ThatGuy]

Aww man, you are screwed. The whole disk has gone blurry. That means it's shot.

[wootwoot]

Its more important to see the flywheel and pressure plate. The only thing that a disc can show you is how much life it has left.

[Jonnie Fraz]

Couple of questions, Did you get the flywheel resurfaced? and why did you pull your clutch back out after 200 miles?

[IMPerfection]

Couple of questions, Did you get the flywheel resurfaced? and why did you pull your clutch back out after 200 miles?
Pics of his flywheel here in his other thread: http://www.zilvia.net/f/showthread.php?t=96579

[S14DB]

You use a clutch alignment tool when you put the disc in?

Other than that, I don't think 240's have alignment dowels for the bell housing.

[darknightMR2]

did you resurface the flywheel before installation? the abnormal ware could be befause alignment, if bolts are torque to spec, ect. it looks like you have a decent amount of life left on it. 200 miles isn't even broken in yet, depending on how you drive.

[S14DB]

This is also a good guide for Clutch analysis:
http://media.centerforce.com/DiagGuide/DiagnosticGuide04DL.pdf