Anything else needed? (If anything is.)

[Mr_Nice_Guy]

In the near future I am going to be lowering my s14 on RSR race springs/AGX set up. I was talking with a buddy of mine that works at a tire/alignment shop about taking it in to get an alignment done afterwards. Now I know that I will need RUCA's for the rear camber, but is there anything needed for the camber in the front? (well, besides caster/camber plates, which I do not have.) Thanks.

[speeddreamz]

In the near future I am going to be lowering my s14 on RSR race springs/AGX set up. I was talking with a buddy of mine that works at a tire/alignment shop about taking it in to get an alignment done afterwards. Now I know that I will need RUCA's for the rear camber, but is there anything needed for the camber in the front? (well, besides caster/camber plates, which I do not have.) Thanks.

camber plates in the front, and ruca on rear if thats even neccesary.

a lot of times springs don't drop u that low where you need that much corrective camber. ask ur friend after u get the springs done if he thinks its a lot of camber and toe

[fliprayzin240sx]

Well anything less than 2.5" spring drop and the rears wont get within stock specs.

[Mr_Nice_Guy]

Thanks for the info guys. I will ask him to throw it up on the alignment rack and see if anything will be needed.