Injen Cold Air Extension

[NutzDrifta]

This might be a stupid question but, isn't the hole where the air box leads to too small for the cold air extension to get through.  My question is if you need to cut a bigger hole there for it to fit?  Also, if you have to cut it, how would you go about doing it?  Any info appreciated.

[toddnappi]

Hi,
On my S13, there was no modification. You have to work with all the pieces a little bit and figure out where they go. But the clamp goes under the hole (you have to reach it from under the car). What year do you have?

[240SX21]

hey toddnappi, what year is your s13 & what type of CAE are you using? i really want to get one for my injen intake, but they dont make one for my year-89.  so im wondering what year is yours cuz i know the hole you're talking about & my car has it too.  im just wondering why theres no CAE for the 89.  let me know, thanks.

[NutzDrifta]

Thanks for the info, the year I have is a 93'.  One more question though, is there a big power difference you see when you have the extension on?  I heard it gives you a little more power.  Thanks.

[toddnappi]

hi, i have a 94 with an injen extension, i'm not sure if they make them for the sohc's. i wouldn't know if there is a power difference because I have always had the cai & cae on at the same time, but I like it that way, and i would definately say buy the cae. it should fit perfect, just do a test fit and figure out what pieces go where. The really bendy one stays in the engine bay, while the L-shaped one goes under the car.

[NutzDrifta]

Sounds good, I'm gonna get that for my first mod and then probably get a new exhaust.  Thanks again.

[sykikchimp]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (240SX21 @ May 11 2002,10:06)</td></tr><tr><td id="QUOTE">hey toddnappi, what year is your s13 & what type of CAE are you using? i really want to get one for my injen intake, but they dont make one for my year-89. so im wondering what year is yours cuz i know the hole you're talking about & my car has it too. im just wondering why theres no CAE for the 89. let me know, thanks.</td></tr></table><span id='postcolor'>
theres not a CAE for the SOHC b/c of the bumper. &nbsp;On the DOHC there is a vent in the bumper below the turn signal. &nbsp;This vent is where the CAE gets the cold air. &nbsp;On the SOHC you don't have such a vent, and I'm not sure about how much room there is behind the bumper to fit the filter..

[HKrpS13]

the vent under the turn signal are for foglights. the 240 in Canada should get them stock.