PDA

View Full Version : Fs : Working S13 Hud


NISSAN_GUY_87
12-02-2005, 10:07 AM
I have a working HUD projector for the S13 coupe. I just tore my dash apart to test it, it is confirmed, it works, and works just fine, zero hesitation in lighting up or anything, nice and bright. I bought a JDM unit and gauge cluster which I am using currently. This projector was a spare. The projector is the USDM unit inside the JDM casing. I don't have a working gauge cluster for it, but I will include the faulty one if you want it, for no extra charge. I would like to get $75 out of the projector. Again, You will get the JDM right hand drive casing for the projector, but the internal unit is easily swapped. Same for the gauge cluster, it is USDM internals in a JDM casing. Again, the faulty gauge cluster is free with the Working HUD (if you want it).

Here is what you are getting:
- 1 Confirmed, Working HUD projector with harness and JDM casing
- (optional) 1 JDM Gauge cluster Casing with USDM internals and all harnesses.

I want to get $75 plus shipping for the HUD unit. Thank you. PM or Email me for addition info or if you have any questions.

Email : [email protected]

http://img.photobucket.com/albums/v713/NISSAN_GUY_87/2096190_83_full.jpg

NISSAN_GUY_87
12-04-2005, 12:45 AM
I neglected to mention this, and I am not sure if it would make a difference, it came out of a KA24DE car. I assume that doesn't make a difference, since the one I am using came from Japan and they don't use the KA over there. And hey, if you need pics or anything let me know so I can post `em. Also still have a white Pig Nose bumper if anyone is in need of one... Thanks