where can i get the sleepy eye?

[CoasTek240]

i wanna know where i can get the sleepy eye conversion.. i foudn it a couple places .. what should i look oout for?

[sil80]

Make your own.... that way you can make it the highest quality possible <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'>

http://nissan92.tripod.com/switch.html

Manually = Pull the fuse for the lights. Pop the hood. There will be a servo next to each light with a black cap on it. Pop the caps off. Turn the brown knob tell the lights are at desired hight(usually three fingers).

[KiDyNomiTe]

umm AutoImaging (http://www.autoimaging.com) should have one by pivot that has like a control so you can change it whenever you want. Or you could look back in the tech section (i think, it might of been chat) but there was someone who knew how to change it manually. Only problem is that the lights won't light up much of the road, and only way to get them back up is use high beam but once they are up they are up till you get under the hood again.

If you want to do it manually someone should still remember how to. But there should be numerous auto ones around

[matic 240sx]

didn't you just get the 300zx style headlights? dual projectors?

[CoasTek240]

yeah i got teh eastbear projectors.. but i'm purchasing another 240 soon, and as soon as i sell my car i will start modifying it.. and i want the sleepy eye conversion. so do u guys thick i should do the maula conversion.. is it reversable if i wanna get it changed later?

[sil80]

Yes it reversable. All you have to do is put the fuse back in and turn your lights on then off.

[luey02]

you guys know how to have the light go up lower? &nbsp;even with turning on and off. &nbsp;I want mine to close during the day but &nbsp;4 inches high at night... &nbsp;any ideas?

[DSC]

THINK BOOST, DAVE, THINK BOOST...

[CoasTek240]

sorry.. dsc.. it was just a minor setback.. u know how i am with the cosmetics.. but don't worry i won't be going showy on ya... i just want a nice clean looking ride.
don't worry i'll keep my mind on the goal..
i keep reciting "high boost+dope 240= good!"
btw Carl got his 91 300zx yesterday.. it's nice <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'>

[CoasTek240]

hey.. what does the servo look like... i guess i'm just beign lazy.. i'll get out see what i can do.. but i'm not familiar with that name?thanx <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'>

[sykikchimp]

Check out the 240sx groub buys, there there is a Headlight Pivot controller on there somewhere. &nbsp;That is probably the Best way to do it.

[boosteds14]

take some NYQUIL
that will give u a sleepy eye

[ajbarnes1]

I say go outside, and flip the headlights up. &nbsp;Then make a whole bunch of noise and racket- that way all the nieghbors will come outside. &nbsp;Then start kicking and punching the lights until they are at the desired height(granted they wont work after this). &nbsp;That way, you can look like as big an idiot while doing the modification as you would after the modification. &nbsp;damn Jdm......

[Bbandit]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (sil80 @ May 09 2002,8:48)</td></tr><tr><td id="QUOTE">Make your own.... that way you can make it the highest quality possible <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'>

http://nissan92.tripod.com/switch.html

Manually = Pull the fuse for the lights. Pop the hood. There will be a servo next to each light with a black cap on it. Pop the caps off. Turn the brown knob tell the lights are at desired hight(usually three fingers).</td></tr></table><span id='postcolor'>
which one is the fuse for the light <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'> ?

[Ballistic-Mobile.com]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (ajbarnes1 @ May 10 2002,4:37)</td></tr><tr><td id="QUOTE">I say go outside, and flip the headlights up. Then make a whole bunch of noise and racket- that way all the nieghbors will come outside. Then start kicking and punching the lights until they are at the desired height(granted they wont work after this). That way, you can look like as big an idiot while doing the modification as you would after the modification. damn Jdm......</td></tr></table><span id='postcolor'>
hahahahahahaha...I am with you on the JDM shiznit!!! &nbsp;The only reason i would get something like that is so i can have these lights installed...http://www.clearcorners.com/products/nissan/240sx1/F_lowpro/Image05.jpg

[ajbarnes1]

I have to admit those look good. &nbsp;Only with the projector headlights would I EVER consider that look.

[KiDyNomiTe]

those r from Clearcorner.com (http://www.clearcorners.com) they look sweet, and look like beamer lights how its a circle and there is nothing in the middle (not sure if the lights in the pic have that mod)
Here are pics from clearcorners.com
Click here (pics are too big for board) (http://www.clearcorners.com/products/nissan/240sx1/F_lowpro_rings/Image05.jpg)
Picture 2 (http://www.clearcorners.com/products/nissan/240sx1/F_lowpro_rings/Image03.jpg)

Direct link to clearcorners stuff for the S13 (http://www.clearcorners.com/products/nissan/240sx1/)

[KAMRAN]

those cost a FORTUNE! looks very nice but i dont think it's worth it... i'd rather invest that money into the engine

[takumi123]

We will be having a sale on a couple of the Pivot Head Light units on May 25th