somone with a brain. apexi avcr

[turknjd]

i have an avcr and i dont have any time to read the manual because of school right now, but i will in a couple of weeks. anyway, can someone with experience give me a short introduction to this boost controller? i want to set my boost at 10-11 psi, and have the boost kick in a little earlier. this thing is alot more complicated than my profec b spec II, so im kind of trippin. it came with the car, so dont ask why i bought it. also, i have a redtop sr in an s13.

[CaoBoY]

you dont have time to read a manual, yet you have time to sit here and post a topic about what the manual willl probably say, and have time to read what people have to say?

[ni[x]it]

Boost is controlled by "duty cycle".
Boost target is controlled by "Boost".
This is assuming you are using the Auto Learn mode.

Anyway, say you want to run 14 pounds;
- set your target boost to 1.0mmhg (14.7-ish PSI)
- set your duty cycle. each car is going to be different, but i'd start at 20%
- go WOT in 3rd. below 1.0 mmhg? raise your duty cycle.
- rinse repeat until you are hitting your target.

it's actually a very easy boost controller.
you can download the full manual from the ApexiUSA website.
I suggest you read it. And don't blow your shit up.

[turknjd]

you dont have time to read a manual, yet you have time to sit here and post a topic about what the manual willl probably say, and have time to read what people have to say?

well, basically i just wanted some introduction to it, so when i read the manual, i will have some background. it is quite extensive btw.