old skool tuning!(apex, greddy, hks, pivot)

[ZenSokuS14]

I have here a bunch of old school tuning stuff left over. These are from Japan. All items are brand new unless stated. I also have some razo pedal and some gauges holder. Feel free to email me with any questions and please bump my thread if u like what your seeing!

APEXi AFC(first gen) $100
Works for Nissans: SRs, CAs, RBs,
Toyota: 1jz,2jz,4ag, 3s
Honda: h, b, and d series
Mazda: 13b
http://i15.photobucket.com/albums/a366/ZensokuEk/DSC01010.jpg

APEXi AFCII $120
Application: same as afc except Hondas
http://i15.photobucket.com/albums/a366/ZensokuEk/DSC01014.jpg
http://i15.photobucket.com/albums/a366/ZensokuEk/DSC01011.jpg

APEXi Multi-Checker $280
http://i15.photobucket.com/albums/a366/ZensokuEk/DSC01003.jpg
http://i15.photobucket.com/albums/a366/ZensokuEk/DSC01001.jpg

APEXi BFC $100
http://i15.photobucket.com/albums/a366/ZensokuEk/DSC01004.jpg
http://i15.photobucket.com/albums/a366/ZensokuEk/DSC01007.jpg

HKS Fuel Cut Defencer $110
http://i15.photobucket.com/albums/a366/ZensokuEk/DSC01020.jpg

HKS EVC $250
Some little thing on the screen otherwise it is brand new.
http://i15.photobucket.com/albums/a366/ZensokuEk/DSC01022.jpg

Greddy Speed Limiter Cut $110
http://i15.photobucket.com/albums/a366/ZensokuEk/DSC01031.jpg

Pivot stuff
Pivot Boost Controller for S14 $200
http://i15.photobucket.com/albums/a366/ZensokuEk/DSC01024.jpg
http://i15.photobucket.com/albums/a366/ZensokuEk/DSC01027.jpg

Skyline (r32, r33 rb26det) ACS-R $170
http://i15.photobucket.com/albums/a366/ZensokuEk/DSC01028.jpg

Greddy Meter Holder (52 or 60mm) sold out
JDM Parking sticker $28
http://i15.photobucket.com/albums/a366/ZensokuEk/sticker7.jpg
Greddy Pillar Gauge Holder (52-60mm) $25 one sold to reccakun08, one more left!
http://i15.photobucket.com/albums/a366/ZensokuEk/DSC01029.jpg

Various RAZO Pedals – manual set sold to DP Michelle G, two auto sets left, make offer
http://i15.photobucket.com/albums/a366/ZensokuEk/DSC01032.jpg

[ESone3]

this must have came off a lost container that finally made it after 7 years!

good stuff tho!

[Saltman]

I'll take the 60mm Greddy Meter holder. How do you want the money? Paypal? Let me know - [email protected] I'm in Cerritos

[DP_Michelle G]

where are you in socal i'll take the silver RAZO Pedals gas,brake/clutch and the dead pedal. how much? [email protected]

[ZenSokuS14]

Saltman, i have someone else that want to take all of them. i will let u know if that people doesn't come through. sorry.

DP Michelle G, same for u someone on here PM me about them. we'll wat he does. but i don't have the dead pedal only gas, brake and clutch. i told him $30 so it's gonna be the same for u. i will let u know if he doesn't take it or respond.

I'm in the 626 area but office is in jtown. so anything pick up or i will ship it.

[ka24deturbo]

I'm interested in the Apexi Multi Checker but do you know if it would work on my RB20DET powered S13? If you don't know just give me some time to give Apexi a call tomorrow so that I know for sure. Thanks

[ZenSokuS14]

I'm interested in the Apexi Multi Checker but do you know if it would work on my RB20DET powered S13? If you don't know just give me some time to give Apexi a call tomorrow so that I know for sure. Thanks

i'm pretty sure it does..but u should make sure. let me know when ur ready. thanks

[shiftnslide]

I'm interested in the Apexi Multi Checker but do you know if it would work on my RB20DET powered S13? If you don't know just give me some time to give Apexi a call tomorrow so that I know for sure. Thanks

i just sold my pretty used multichecker for $225 shipped.. this is a pretty good price for a brand spankin new one.

as for working for an rb20det, it should. it works for s13, and it has applications for rb20det. multicheckers have a number of switches that you flip depending on the engine and maf sensor- look on the right side of this picture.

http://www.240sx.org/links/installs/apex/apex08.gif
from: http://www.240sx.org/faq/articles/apex.htm

good luck with the sale.

[crioten]

how do you accept payment?

still have the 52mm gauge holder (not the pod)?

pm or email me please

[RaidenKing]

can't you buy an SLC anywhere else for about $70? I'd pay you $45 for a used one

[AndysAutoSport]

Wow this would of been great for my AE86 setup in the past!

You should post some of this stuff at Club4ag because those guys like to keep it oldschool ya know!

[ZenSokuS14]

Wow this would of been great for my AE86 setup in the past!

You should post some of this stuff at Club4ag because those guys like to keep it oldschool ya know!

thanks bro, i already did!

also thanks andysautosport and shiftnslide for the kind words.

crioten, someone else contacted me so i'm going to see wat they are going to do to be fair.

Raidenking, where can u get one for $70? u'd pay me $45 for a used one? the problem is, mine are not used.

[ZenSokuS14]

sale is pending on the razo pedals to michelle

[ZenSokuS14]

sale is pending on the razo pedals to michelle

pedals sold to michelle

[crioten]

thats cool, if they fall through, please PM me :)

[DP_Michelle G]

bump for good seller

[ZenSokuS14]

bump for good seller

thanks! it was a nice meeting u

[khoadogg]

Interested in the fuel cutter,speed cutter and gauge holders. package deal for all of those?

[ZenSokuS14]

Interested in the fuel cutter,speed cutter and gauge holders. package deal for all of those?

PMed u, make me an offer

[SirWarrior]

i'll take all three 60mm holders if still avail.
LMK via PM or email me [email protected]

[ZenSokuS14]

i'll take all three 60mm holders if still avail.
LMK via PM or email me [email protected]


the 60mm is sold to saltman. i have one 52mm and one 60mm gauge holder still but sale is pending on those and have gotten payment. let me know if ur interested.

[RaidenKing]

http://www.store.yahoo.com/phase2motorsports/grsplicuts.html

Retail for 75, sell on this site for 70.
I would be expecting to pay a fellow zilvia member less than that, not more. Let me know how much you'd like for it.

[ZenSokuS14]

http://www.store.yahoo.com/phase2motorsports/grsplicuts.html

Retail for 75, sell on this site for 70.
I would be expecting to pay a fellow zilvia member less than that, not more. Let me know how much you'd like for it.

these are the new generation ones. some people need the old style ones which i have. i have already looked at phase2 before i posted. thanks for your comments but if ur expecting to pay less than 70 then maybe it would be a better bet if u bought from phase2 and support a sponsor. people that have contacted me know that i'm willing to work with prices, but not almost half off my selling price. thanks

[SirWarrior]

the 60mm is sold to saltman. i have one 52mm and one 60mm gauge holder still but sale is pending on those and have gotten payment. let me know if ur interested.
So one 60mm avail?? or is one sold and one pending?

If its for sale, LMK and I will send $$.
Thanks

[ZenSokuS14]

So one 60mm avail?? or is one sold and one pending?

If its for sale, LMK and I will send $$.
Thanks

it was but seems like no one is responding to me to make payment. so if u PM me and make the payment first. it's yours. thanks!

[ZenSokuS14]

buy my stuff!

[ZenSokuS14]

i need to get rid of this stuff!

[ZenSokuS14]

both 60mm gauge holder sold. only one 52mm left!

[ZenSokuS14]

sorry pics are down at the moment. please email for pics in the meantime

[email protected]

[Wes_s13]

email pics of the apexi safcII to [email protected] , thanks

[reccakun08]

this is the greddy adj holder right? with the bottom mount? if so ill take the 52mm and i can paypal you right away


also is the pillar gauge 52mm but can be bored to 60mm? how many gauges can it hold? A pillar correct?

[caneman8]

Please E-mail pics of the AFC and AFC-II to [email protected] Also, could you tell ,me the main differences between the two.

[ZenSokuS14]

caneman8, emailed u with pics

reccakun08, PMed u!

Wes_s13, it's not a safc it's only afc or afcII. let me know if ur still interested.

Thanks guys!

[Slidin240Wayz]

Is the pod LHD or RHD?

[ZenSokuS14]

Is the pod LHD or RHD?

it's rhd. it wil work for lhd but the gauge will angle up instead of angling down

[reccakun08]

pillar pod and 52mm gauge holder sold to me.

Thanks.

[ZenSokuS14]

pillar pod and 52mm gauge holder sold to me.

Thanks.

thanks man. i shipped it out today

[ZenSokuS14]

bump for a nice day

[ZenSokuS14]

added jdm parking sticker

[SirWarrior]

hey bro can you email me the tracking # for that 60mm holder??
thanks

[ZenSokuS14]

hey bro can you email me the tracking # for that 60mm holder??
thanks

PMed u. thanks

[ZenSokuS14]

PM me for good prices

[Jeff240sx]

Read the R&G.
-Jeff