PDA

View Full Version : Question for anyone with a s14 blacktop sr20det

TRGcoating
11-15-2005, 05:08 PM
I bought a valve cover as a core to powder coat, and for some reason the hole for the coil pack cover and coilpacks arent drilled in tap. Anyone happen to know the thread pitch and bolt size?
Dousan_PG
11-15-2005, 07:05 PM
its the typical s13/s14/s15 10mm bolt
the one that are used everywhere..easiest one to pull off is your fenders.
CleanS14
11-15-2005, 07:45 PM
Nissan thread pitch in general is 1.25 But Aaron is correct this is a M10x1.25 bolt.
TRGcoating
11-15-2005, 07:58 PM
Are they that big? I figured itd be the same size as the s13 red top covers. Maybe you misunderstood what ones i was talking about. I'm talking about the bolts that hold the plastic cover over the spark plugs and the holes that hold the coil spark plugs in place in the spark plug well.
Slidin240Wayz
11-15-2005, 09:50 PM
They are different than the regular 10 mm bolt around the car. The thread is alot smaller. PM me I am in NJ and have the bolts in my house. Carlos
mrmephistopheles
11-15-2005, 09:56 PM
I bought a valve cover as a core to powder coat, and for some reason the hole for the coil pack cover and coilpacks arent drilled in tap. Anyone happen to know the thread pitch and bolt size?

just FYI, that means that valve cover came from an SR20DE.
Only the DETs had the spark plug cover hoo-hah.
TRGcoating
11-15-2005, 10:00 PM
Ya, i found that out, but it seems like everything else on the cover is the same. I had a s13 cover that was the same way, atleast i know why now. I compared the s13 with the undrilled holes to the one with the drilled holes, and everything is exactlly the same, im assuming its this way with the s14 too? I hope!