Need pics of JDM s13 coupe rear valences [Archive] - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

240sxdriver

11-09-2005, 05:41 PM

Need pics of JDM (or replicas) s13 coupe rear valences on the car. I see a lot not on the car, but can't seem to find any actually put on. I remember I saw one a week or go in a thread, but I can't find it anymore. Does Nissan (US) sell any rear valences? Pics of that if they do?

ThatGuy

11-09-2005, 05:48 PM

http://img199.imageshack.us/img199/5229/whitecoupe1zx.jpg

You're welcome.

unwed_transient

11-09-2005, 06:21 PM

they're not very noticable...I like.

who makes those? nissan (us)?

ThatGuy

11-09-2005, 06:22 PM

OEM Nissan Rear Valences.

FRpilot

11-09-2005, 06:24 PM

doesnt look like anything is addd on the car..

unwed_transient

11-09-2005, 06:25 PM

^ that's why i like them.

240sxdriver

11-09-2005, 06:57 PM

Yeah. That's what I like about them too. Any retailers? Tried google, no luck.

ThatGuy

11-09-2005, 07:01 PM

Try JSpec.com, PandaGarage.com, or any other retailer of Used Japanese parts. If they don't list them, shoot them an Email. They can probably track them down for you.

axiomatik

11-09-2005, 07:19 PM

Are those the oem sideskirts too?

ThatGuy

11-09-2005, 07:25 PM

Yes, they are.

TheTimanator

11-09-2005, 07:32 PM

IES13

11-09-2005, 08:36 PM

Both Jspec and PandaGarage do not have any rear sides in stock...cause I asked both Sam and Jimmy....=(

ThatGuy

11-09-2005, 09:03 PM

Which is why I suggested asking. Even though neither of them have them in stock, I know they get new shipments all the time. If you notify them you'd like a set, they'll probably try and get a set into the next shipment. :bow:

I am not personally looking to order a set right this minute, but when I do it will likely be through Sam or Jimmy. :D

RiceEata

11-09-2005, 10:06 PM

Here's a picture of a s13 with zenki front bumper w/lip, and rear valence. Anybody know what type of sides this car has?

http://img.photobucket.com/albums/v335/oO0oBo0Oo/020.jpg

edit: after looking at the pictures on stillensucks.com, these don't look like oem rear valences.

Ritz S14

11-09-2005, 10:09 PM

Very subtle, not very noticable. But very hot!

kevincao

11-09-2005, 10:21 PM

very hot. subtle. ebay has some sometimes.

kazuo

11-10-2005, 01:15 AM

You can see pics of the OEM rear valences on Glenn's car.

http://www.stillensucks.com/

I think its clean, but I dont like how it doesnt like up "perfectly" with the sides... I opted for fpr copies of the factory valences, except that the angle where it meets the sides is more "aggressive" and lines up better with the side skirts.

The factory rears are a little too clean for my tastes.

krustindumm

11-10-2005, 02:18 AM

who makes the copies?

OptionZero

11-10-2005, 10:15 AM

There aren't any other valences for the coupe, aftermraket stuff is always a complete bumper, and nearly all of them look the same.

WongFeiHung

11-10-2005, 10:54 AM

Does anyone make copies of the OEM sideskirts?

WILDACEX187

11-10-2005, 10:56 AM

bing used to do them. i have a set that i bought from him that i need to put on....sumtime...when i have time lol.

DP_Michelle G

11-10-2005, 01:43 PM

cwest is the only place that i can think of. That makes a set of rear valences for the coupe

kevincao

11-10-2005, 07:14 PM

i had an eye on some on ebay, but decided i didnt want them. search "JDM s13 silvia Rear" and there should be some white ones sold by hibiki_racing_jdm

IES13

11-10-2005, 11:06 PM

Bomex, Veilside and DRFT have there own rear valences that fit on stock S13 coupe rear bumpers.

kazuo

11-11-2005, 12:53 AM

bing makes exact fpr copies of the factory stuff. I honestly have NO idea who makes the fpr valences I have, but I've seen it before on some cars 'round the net, mostly Japanese ones (specifically the purple S13 coupe w/ S14 Kouki front).

I'll take pics of my valences when I finally get them painted and installed on the car, lol. :P

0kami

11-11-2005, 07:06 AM

In case your wondering you can also custom fit the rear canadian OEM hatchback lip to fit the coupe, as seen on the PDM hatchback Im also rocking one, it's pretty damn clean, sorry for the dark pic but you can get the idea on the bodyline, I also have OEM silvia side's but the front PDM lip kills the flushness if thats what your in it for.

http://memimage.cardomain.net/member_images/6/web/666000-666999/666160_65_full.jpg

http://memimage.cardomain.net/member_images/6/web/666000-666999/666160_64_full.jpg

crazyikimasho

11-11-2005, 08:09 AM

along the same lines.... does anybody know if the OEM sideskirts (180sx or Silvia) line up with a zenki S13 bumper with a lip?

I've seen pics with them on 240's with Silvia conversions with the factory bumper and lip as well as chuki bumpers but not a S13 zenki front bumper.

Im currently running zenki front lip and pignose front bumper w/OEM sideskirts on coupe. Lines up perfect, will eventually change out the front but actually looks really good. All I really need is rear valances to finish it out. Still stock height and wheels for the moment (will be changing shortly).

pic (http://www.lookoutdrift.com/forums/index.php?act=Attach&type=post&id=1846)

axiomatik

11-11-2005, 08:15 AM

damn, i'm always amazed at how high the stock ride height is. oem aero looks really good, I think I need to find me some.

the head

11-11-2005, 08:30 AM

anyone have pics of the aftermarket rear valances

ThatGuy

11-11-2005, 03:24 PM

Bomex, Veilside and DRFT have there own rear valences that fit on stock S13 coupe rear bumpers.

Bomex sells a full rear "Under Spoiler".
http://www.bomexaero.com/pics/nissan_s13/Untitled-3-01.gif

Veilside sells a full rear bumper "lip" not valences.
http://veilside.com/veilsideusa/aero/nissan/s13cirear.jpg

DRFT doesn't make rear valences either. Their Track car is using OEM Valences with their 180SX sides and front.
http://www.c-west.co.jp/drft/img/180sx_rear.jpg

None of these are valences, nor do they look as clean as OEM. (Except the DRFT car which is actually using OEM Valences.) Anybody else have any ideas?

DP_Michelle G

11-11-2005, 05:05 PM

c-west rear valence (http://www.c-westusa.com/aero/d_s13.asp)

WILDACEX187

11-11-2005, 10:04 PM

okami if u can get a better pic of that rear lip i would appreciate it.

RiceEata

11-11-2005, 10:06 PM

damn, i was hoping no one would post that. :x:

WILDACEX187

11-11-2005, 10:12 PM

^why? i have that same lip but the oem version that i've been wanting to sell but people out here are cheap so maybe i can just mod it to my car.

RiceEata

11-11-2005, 10:19 PM

oh no, I was refering to michelles post. thats the rear valance i'm getting.

crazyikimasho

11-12-2005, 08:02 AM

I'm considering getting the Veilside rear valances if I don't just sell what I have and go with something aggressive altogether once I get my suspension and wheels on.

0kami

11-12-2005, 01:55 PM

okami if u can get a better pic of that rear lip i would appreciate it.
ill do that when i get the chance

bing

11-16-2005, 04:15 PM

http://bings.ca/images/DSC02509%201500.jpg

yeah i did these valances, that is a pic on my car. they arent lined up properly. u just cant trust anyone to do anything right. ever.

im also not happy with the fibreglasser, he's being a bit of a fag so i'll be redoing them in 2006. going to try to make them even better.

stay tuned to my site in my sig.

JDMxS13

11-18-2005, 02:03 PM

Those Valances Are All Over Ebay I Got A Set Right Here =]

WILDACEX187

11-19-2005, 09:00 AM

bing you're not going to make that floor bar anymore?

bing

11-20-2005, 09:09 PM

bing you're not going to make that floor bar anymore?

well i could make one to order i guess but shipping would be a bit of a pain.

the bar i made is also not adjustable and for some reason people seem to think it makes a big difference if it is or not. the ones i made were 1-piece

if you ask me you just need the bar to be snug so that it fight chassis flex. you dont actually need to put tension against the rails. having it bolted in should take care of most of that anyways.

if you want one hit me on on msn, you still have me on there right?