Pepperoni
11-08-2005, 02:12 PM
Interested in going the custom route for FMIC piping? You'll save a lot of money if you go this route vs. name brand piping.
I'm selling 4-5 aluminum polished 2.5" 90ยบ mandrel bent piping + 6 couplers+12 clamps. Some pipes would be longer than others so you can cut them according to your setup. Works great and is the same as buying a name brand kit...they both accomplish the same thing.
As far as pricing:
As of now, I only have enough for maybe 2 or 3 people. So be sure to PM me about it first. I would turn it into a group buy for a bit cheaper, but I'm not sure how many people are interested + I don't have enough for more than mentioned.
$15-17 covers shipping/partial Paypal fees
So total pricing:
$140 (shipped) for 4 pipes, 6 couplers +12 clamps
$155 (shipped) for 5 pipes, 6 couplers +12 clamps
On JCWhitney and similar sites, I've found mandrel bent 2.5" piping to be generally around $25+shipping per pipe. Also, a single GReddy coldpipe (even on eBay) goes for ~$100. So I think these prices are reasonable. If you buy the kit with the 5th pipe, it usually would be used as the end cold pipe (see bottom pic, top pipe on the left). I did this with my setup and used the stock cold pipe coupler to connect it to the throttle body since it's long and fits fine.
http://img54.imageshack.us/img54/1943/custompipes8fm.jpg
Here's a basic picture so you know what it would look like. Of course, these pipes are uncut/untouched and have not even been polished yet. I will polish them myself before shipping them out.
If you need any bungs welded, let me know; I can weld aluminum for cheap. Maybe you'll need a bung for the AICV, or maybe a fitting for your boost controller.
Also, if you want a custom intake (see group buy section) I can do your intake + this kit for an even $200 shipped (or $190 for 4 pipes+intake) Save $20-30 when buying both kits!
For more info or if you have questions, feel free to PM me or email me.
I accept PayPal and Money Orders (PM/email me for info)
My email address (as well as paypal) is [email protected]
Thanks,
Aure
I'm selling 4-5 aluminum polished 2.5" 90ยบ mandrel bent piping + 6 couplers+12 clamps. Some pipes would be longer than others so you can cut them according to your setup. Works great and is the same as buying a name brand kit...they both accomplish the same thing.
As far as pricing:
As of now, I only have enough for maybe 2 or 3 people. So be sure to PM me about it first. I would turn it into a group buy for a bit cheaper, but I'm not sure how many people are interested + I don't have enough for more than mentioned.
$15-17 covers shipping/partial Paypal fees
So total pricing:
$140 (shipped) for 4 pipes, 6 couplers +12 clamps
$155 (shipped) for 5 pipes, 6 couplers +12 clamps
On JCWhitney and similar sites, I've found mandrel bent 2.5" piping to be generally around $25+shipping per pipe. Also, a single GReddy coldpipe (even on eBay) goes for ~$100. So I think these prices are reasonable. If you buy the kit with the 5th pipe, it usually would be used as the end cold pipe (see bottom pic, top pipe on the left). I did this with my setup and used the stock cold pipe coupler to connect it to the throttle body since it's long and fits fine.
http://img54.imageshack.us/img54/1943/custompipes8fm.jpg
Here's a basic picture so you know what it would look like. Of course, these pipes are uncut/untouched and have not even been polished yet. I will polish them myself before shipping them out.
If you need any bungs welded, let me know; I can weld aluminum for cheap. Maybe you'll need a bung for the AICV, or maybe a fitting for your boost controller.
Also, if you want a custom intake (see group buy section) I can do your intake + this kit for an even $200 shipped (or $190 for 4 pipes+intake) Save $20-30 when buying both kits!
For more info or if you have questions, feel free to PM me or email me.
I accept PayPal and Money Orders (PM/email me for info)
My email address (as well as paypal) is [email protected]
Thanks,
Aure