PDA

View Full Version : Question about RUCA

silvias14ka24de
10-31-2005, 06:35 PM
Is any RUCA interchangable between the s13 and s14?
A Spec Products
10-31-2005, 07:15 PM
Is any RUCA interchangable between the s13 and s14?

yes indeedy, i wrote graffiti on the bus...
Ghettokracker71
10-31-2005, 07:18 PM
i wrote graffiti on the bus...

wtf?




(MESSAGE LENGHSUCKMYCOCK)
HyperTek
10-31-2005, 07:18 PM
and carved our name with a plus....

ahah..

*wait.. wrong verse* from Pharsyde song..
S14 ruca may rub againts the strut/coilover depending on which way u install it
silvias14ka24de
10-31-2005, 10:02 PM
hm ic ic. i still get mixed answers cause i just talked to another guy, and he said they're not interchangeable. any more thoughts?
HyperTek
10-31-2005, 10:36 PM
Battleversion sells only 1 arm for s14 and s13.
A Spec Products
11-01-2005, 01:47 AM
and carved our name with a plus....

ahah..

*wait.. wrong verse* from Pharsyde song..
S14 ruca may rub againts the strut/coilover depending on which way u install it

yeeeeah, right on hypertek, we got some old school rap cats in the building!

ghettokracker, i was answering yes, in the form of "finish the lyric," excuse the lame creativity.

this has been covered numerous times, it is interchangeable. if you have s13, buy s13, if you have s14, buy s14. in the case of BV, then obviously just get the one he sells. if you get a s14 ruca free, then sure, use it on your s13, but otherwise no sense, unless you're super duper lazy to take off one more bolt to install. s13 is usually cheaper than s14 anyhow, in cases like cusco. $.02
fliprayzin240sx
11-01-2005, 09:09 AM
Well since were talkin RUCAs...is that all you need to fix the camber or do you need the other 2 arms too?
Angel
11-01-2005, 09:56 AM
yes indeedy, i wrote graffiti on the bus...

I was on her jock, yes indeedy I wrote graffiti on the bus

First I'd write her name then carve a plus,

with my name last, on the looking glass,

I seen her yesterday but still I had to let her pass



Nothing to contribute.... but love this album :)
A Spec Products
11-01-2005, 02:10 PM
Well since were talkin RUCAs...is that all you need to fix the camber or do you need the other 2 arms too?

yes
ruca adjusts camber
rear toe adjusts....toe
rear traction doesnt really do much imo
non2os13
11-01-2005, 03:48 PM
i have cusco s14 rucas on my s13
silvias14ka24de
11-02-2005, 09:58 AM
Is it a hard install? I wouldn't think so, but I have no clue. Anyone with proper steps to install?
A Spec Products
11-02-2005, 11:58 AM
Is it a hard install? I wouldn't think so, but I have no clue. Anyone with proper steps to install?

Search:

http://www.zilvia.net/f/showthread.php?t=83907&highlight=ruca+install

http://www.zilvia.net/f/showthread.php?t=91986&highlight=ruca+install

Get alignment after, or eyeball it.
silvias14ka24de
11-02-2005, 05:06 PM
yaeh i shuld'e but boss is right behind me lol will search next time
nrg
11-02-2005, 09:31 PM
taken from ziptied.com

you have to have coilovers for them to be interchangeable.

the S13 strut's lower spring perch is the cause for most companies making them full-moon style with wider arcs.

here is a pic of S14 arms sitting on top of S13 arms. this should be a good reference for most people if they havent seen it already.

http://memimage.cardomain.net/member_images/11/web/359000-359999/359615_137_full.jpg
NI_YON_Zenki
11-02-2005, 09:38 PM
Why is this tread still available for comments ? ? ? as us something we need to think about. .. .well some of us. .. .
silvias14ka24de
11-02-2005, 09:51 PM
aha. good thing i have coilovers then.