Picture Request: Interior Guage Setups [Archive] - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Ess14

10-25-2005, 09:52 PM

I'm looking for pictures of unique, clean, and effective guage mounts. All designs are good for discussion.

Also I'd like to see some good pictures of using the S-AFC in place of the Tach.

There was a thread like this a while back, I am reviving the topic for new pictures and to spark ideas, maybe designs for contruction.

SpeedMonkeyInc

10-25-2005, 10:05 PM

I would not say unique, but I was going for clean.

http://www.photodump.com/direct/Voltron/gaugepanel-T.jpg (http://www.photodump.com/viewer/Voltron/gaugepanel.html)
http://www.photodump.com/direct/Voltron/gaugepannel2-T.jpg (http://www.photodump.com/viewer/Voltron/gaugepannel2.html)

hi.im.kaji

10-25-2005, 10:14 PM

NemeGuero

10-25-2005, 10:16 PM

http://img455.imageshack.us/img455/3342/crw15810cj.jpg
http://img455.imageshack.us/img455/353/crw14213nm.jpg
http://img455.imageshack.us/img455/5111/s14int1la.jpg

SpeedMonkeyInc

10-25-2005, 10:21 PM

looks sick....u had enough room prolly for three gauges tho huh?

Yeah, could have squezed another in. But I think it would end up being cluttered and the carbonfiber might not have been strong enough in the thin spots between the gauges. So, I just left it at two.

I am using the Blitz Dual Turbo timer for my boost gauge.
http://www.photodump.com/direct/Voltron/boostmeter-T.jpg (http://www.photodump.com/viewer/Voltron/boostmeter.html)

Brian

10-25-2005, 10:22 PM

Meh, I sold my CAMP.
DO you happen to have the audio on it set up?

NemeGuero

10-25-2005, 10:51 PM

those pics aren't my car...

m072514

10-25-2005, 11:40 PM

good lord that automotion S14 interior is SICK! i couldnt even tell it was the same car as mine until i looked twice!!! very clean. -jack

BTW, can someone confirm/deny that those are Z33 seats???

NemeGuero

10-25-2005, 11:53 PM

word, I like the color scheme and leather wrapped on the doors.. those pics are from my personal collection of how I want my car to look
its where I get my ideas.. hehe. anyone re-done s14 door panels like that? I tried but mine came out like shit

dunno about z33 seats

whooha1217

10-26-2005, 12:17 AM

http://photo1.absee.com.tw/photo/7686/37414/img_1959_t565.jpg
http://photo1.absee.com.tw/photo/7686/37414/img_1957_t565.jpg

i suck at taking pictures....

hi.im.kaji

10-26-2005, 12:41 AM

damn i want defi gauges...they are sooo sick when they start up doing the full sweep

smily_vigor

10-26-2005, 12:48 AM

good lord that automotion S14 interior is SICK! i couldnt even tell it was the same car as mine until i looked twice!!! very clean. -jack

BTW, can someone confirm/deny that those are Z33 seats???

That's my friend Greg's car from automotion from here in Canada. They aren't Z33 seats they are actually his original s14 seats that he had re-upholstered and the guy that did them added some more boltering on the sides for support and the middle hump like the Z33 seats. As for the door panels it's the same person that did those at the same time in the same leather.

Flybert

10-26-2005, 01:06 AM

http://photo1.absee.com.tw/photo/7686/37414/img_1959_t565.jpg

SAFC and Power FC? Why o why?

Ess14

10-26-2005, 01:14 AM

Headunit in the dashboard... Interesting.

Anybody have this done on an S14?

AllenRPS13

10-26-2005, 01:17 AM

http://photo1.absee.com.tw/photo/7686/37414/img_1959_t565.jpg
http://photo1.absee.com.tw/photo/7686/37414/img_1957_t565.jpg

i suck at taking pictures....

oh... yr alpine cd player placed on the passenger side? that's hella cool!!! it's really nice interior! :jerkit:

whooha1217

10-26-2005, 02:09 AM

SAFC and Power FC? Why o why?

avcr not safc

NemeGuero

10-26-2005, 02:27 AM

That's my friend Greg's car from automotion from here in Canada. They aren't Z33 seats they are actually his original s14 seats that he had re-upholstered and the guy that did them added some more boltering on the sides for support and the middle hump like the Z33 seats. As for the door panels it's the same person that did those at the same time in the same leather.

fuckin' sexy.. you got anymore shots of his car? inside?

drift into a curb

10-26-2005, 03:47 AM

I like my center vent.

http://img.photobucket.com/albums/v343/driftintoacurb/IMG_6241.jpg

smily_vigor

10-26-2005, 04:49 AM

fuckin' sexy.. you got anymore shots of his car? inside?

Yeah I should have some, we took some shots at the last car show over here on the weekend of the 16th. You should see the two latest mods he did; GREX brake upgrade front and back, and custom converted rear taillights to full LED. It's kinda hard to explain but trust me it's sick as hell! I'm at work now so I don't have the pics with me but I was planning on passing by the shop later today so I can get the latest shots and the ones I got on my computer at home.

go240

10-26-2005, 06:59 AM

http://img.photobucket.com/albums/v483/mnaccord/cars/DSC00058copy.jpg
http://img.photobucket.com/albums/v483/mnaccord/cars/240%20build%20up/DSC01379copy.jpg

projectRDM

10-26-2005, 07:41 AM

I'm not finished with the passenger side gauge pod, but here's a few random shots of other parts, mainly on the second page:

http://www.t-mobilepictures.com/projectRDM/projectRDM/ps/ALBUM/VIEWWEBSITE?foneblog=1130334214483

srpowered240sx

10-26-2005, 10:46 AM

heres a few of mine. i have 3 more going into the center vent next time i have a full weekend off.
http://i10.photobucket.com/albums/a133/srpowered240sx/interior005.jpg
http://i10.photobucket.com/albums/a133/srpowered240sx/interior-girls008.jpg
hard to see, but my air/fuel and digital fuel pressure gauge is on the passenger pillar. not the most user friendly place, but i like it, and they are not gauges i look at all the time.

hi.im.kaji

10-26-2005, 11:33 AM

whats that screen on your passenger side for?

RYAN_S-14

10-26-2005, 12:15 PM

srpowered240sx

10-26-2005, 12:25 PM

whats that screen on your passenger side for?

dvd player, and i have a dvd of maps of the us...so i guess its also cheap ass navigation.

OptionZero

10-26-2005, 12:29 PM

dibs on r240na's taillights whenever he decides to sell' em...haha

mr_240sx

10-26-2005, 03:48 PM

i finally went out today and took some pictures of my gauge set-up! hope you guys enjoy it!

http://i5.photobucket.com/albums/y172/mr_240sx/89%20nissan%20240sx/Pict0139.jpg
http://i5.photobucket.com/albums/y172/mr_240sx/89%20nissan%20240sx/Pict0138.jpg
http://i5.photobucket.com/albums/y172/mr_240sx/89%20nissan%20240sx/Pict0137.jpg
http://i5.photobucket.com/albums/y172/mr_240sx/89%20nissan%20240sx/Pict0136.jpg
http://i5.photobucket.com/albums/y172/mr_240sx/89%20nissan%20240sx/Pict0135.jpg
http://i5.photobucket.com/albums/y172/mr_240sx/89%20nissan%20240sx/Pict0134.jpg

Ess14

10-26-2005, 04:56 PM

what are the three things below the head unit in carbon fiber?

mr_240sx

10-26-2005, 05:19 PM

what are the three things below the head unit in carbon fiber?
ignited switches.

1 of them at the moment controls the electric fan on the rad.
the other 2 are just there to make it look right and further down the road when i need more switches, they are already installed!

mrmephistopheles

10-26-2005, 06:41 PM

http://img489.imageshack.us/img489/7285/blah1dc.jpg (http://imageshack.us)

Forgive the mess, the car wasn't mine yet.

NemeGuero

10-26-2005, 07:12 PM

your molded SAFC is HAWWT.. fiberglass?

mr_240sx

10-26-2005, 07:31 PM

your molded SAFC is HAWWT.. fiberglass?
tks dude! put in lots of hours trying to make it! fiberglass is right.

hi.im.kaji

10-26-2005, 10:54 PM

tks dude! put in lots of hours trying to make it! fiberglass is right.
damn that looks crazy! fiberglass is hard to use huh?

mr_240sx

10-26-2005, 11:06 PM

damn that looks crazy! fiberglass is hard to use huh?
its not hard to use it, its just hard to use it and make it look clean!

projectRDM

10-27-2005, 07:59 AM

dibs on r240na's taillights whenever he decides to sell' em...haha

When hell freezes over, thaws, reheats, and then looses fire again.

Slip&Sliden 240

10-27-2005, 09:19 AM

http://img396.imageshack.us/img396/3921/blitzbling6bz.jpg
http://img447.imageshack.us/img447/5017/rhd3gw.jpg

SpeedMonkeyInc

10-27-2005, 10:58 AM

Nice and clean! I like those Blitz gagues Slip n sliden...

go240

10-27-2005, 11:12 AM

blitz gauges are so sexy. someday i'll have something nicer than autometer

viscid240

10-27-2005, 11:55 AM

Really like those blm's. looked into them but can you post a pic of them as a night/dark shot.

SRkouki

10-27-2005, 12:20 PM

my shit is still under construction, but heres some pics
http://www.taboclothing.com/glovebox/04.jpg
http://www.taboclothing.com/glovebox/05.jpg
im gona take out the whole center and replace it with that same material and put a few more gauges and move my head unit and stuff.... will post more pics later

EchoOfSilence

10-27-2005, 01:12 PM

fucking wow, srkouki.

sideview_180sx

10-27-2005, 02:23 PM

damn and all i'm planning on getting is a techtom mdm-100 or blitz r-vit, and nascar-spec autometer guages (stepping motor function, playback enabled) oil temp/pressure and water temp.

srpowered240sx

10-27-2005, 04:44 PM

hi.im.kaji

10-27-2005, 04:58 PM

glovebox gauges are hard to see....unless its a show car of some sort......

SRkouki

10-27-2005, 06:05 PM

hi.im.kaji- its actually surprisingly easy to see 'em from my seat (i am tall and have the seat all the way back)
srpowered240sx- i wouldnt be changing my boost while in the drivers seat
EchoOfSilence- thank you :) (credit goes to terry from Akuma World)

Andrew Bohan

10-27-2005, 07:49 PM

lol @ my s13:
http://www.mountainracer.com/pics/driftaholic/gutrahg1006.jpg

my fc is better:
http://www.mountainracer.com/pics/driftaholic/gaugepanel%20020.jpg

chmercer

10-27-2005, 08:13 PM

lol @ my s13:
http://www.mountainracer.com/pics/driftaholic/gutrahg1006.jpg

rofl. give you 50$ for the tytest gauge mount ive ever seen.

CASH IN HAND!!!!!!!! :hyper:

NemeGuero

10-27-2005, 08:19 PM

cardboard is MaD JdM TyTE!! lol

Ess14

10-27-2005, 09:09 PM

cardboard is MaD JdM TyTE!! lol
he had it imported, makes all the difference.

By the way, I don't have pictures yet but this is my future setup:

I don't want to disturb the stock CD player location, I like keeping that stock, MAYBE Relocate it to the dash and switch it with the guage locations but:

my 3 Guages above the center vents, angled towards driver.
Turbo timer HKS type 1 mounted to the left of the steering column
Boost controller... I don't know
SAFC, maybbbbe mounted somewhere, probobly in place of the ash tray though.
CD player / DVD in stock location (flip up)

Where could I put my SAFC that looks nice instead of the ashtray, but still effectively read.

Andrew Bohan

10-27-2005, 10:24 PM

rofl. give you 50$ for the tytest gauge mount ive ever seen.
CASH IN HAND!!!!!!!! :hyper:

sorry, i threw it away last year. i can maybe import another one if you want though

pignosecoupe

10-28-2005, 07:41 AM

[qoute=Ess13]don't have pictures yet but this is my future setup[/quote]

if you did have pics, i would want to take a look at your camera!

smily_vigor

11-24-2005, 05:29 AM

Hey I know it's been awhile but I forgot all about the fact that someone had wanted another pic of my friends s14 interior. This is a pic from the other side so you can really see the dash with the gauge install. there are two defi gauges on the a pillar but in the pic you only see one. Also the turbo timer is on the other side of the steering wheel here you clearly see the AVC-r and EDFC for the tein suspension. Also notice the s15 electrice light adjuster (that is wired and works) and the relocated cruse control. It did work when he had an sr20det but now with the RB26DETT it's non-exsistent, who needs cruise anyways...lol. Any other info on the car let me know.

http://img502.imageshack.us/img502/9985/pa1501059iy.th.jpg (http://img502.imageshack.us/my.php?image=pa1501059iy.jpg)

mr_240sx

11-24-2005, 05:38 AM

wow thats clean!! isnt that the s14.5 from montreal??

Dousan_PG

11-24-2005, 08:32 AM

my safc is in the din
i never need to look ati t
its tuned its done
i just use the Battery voltage off it
going in glove box when i score one

http://i29.photobucket.com/albums/c252/dousan/DSC01765.jpg

if u think my gauge are too far,then you dont know shit
its no problem at all.
only a jackass would stare at their gagues while driving
they are hooked up to warning lights and shit. no worries.

Rezlo

11-24-2005, 12:05 PM

old set up
http://www.floridasr20s.com/gallery/albums/album69/12_G.sized.jpg

new set up (kind of) i have since moved the boost off the a pillar and sold the a/f in the pillar
http://www.floridasr20s.com/gallery/albums/album79/IMG_2667.sized.jpg

Please could you tell me where you got your RHD gauge pod for your S14, ive been looking for one for ages but can only find LHD gauge pods

RYAN_S-14

11-24-2005, 01:24 PM

Please could you tell me where you got your RHD gauge pod for your S14, ive been looking for one for ages but can only find LHD gauge pods

in japan, pm me

Ess14

11-24-2005, 10:25 PM

what kind of climate control system is that in the tan s14... is that a digital screen? What's it from?

NemeGuero

11-25-2005, 01:13 AM

JDM climate control...

turbozxi

11-25-2005, 03:30 AM

Please could you tell me where you got your RHD gauge pod for your S14, ive been looking for one for ages but can only find LHD gauge pods
http://i7.photobucket.com/albums/y262/turbozxi/Lifeaftercrash014.jpg

Nice setup :squintd:

ni[x]it

11-25-2005, 08:43 AM

I've never seen so many hacked up cars in all
my life. Then again, I haven't been to any fast
and furious car shows.
Dude with the stuff in the GloveBox knows how
to do it right! Good job SRPowered240SX...

blackflag_Rms13

11-25-2005, 12:23 PM

Hot s15 cluster and fiberglass setup...

http://forums.nicoclub.com/zerofile/18943/carpics002.jpg

http://forums.nicoclub.com/zerofile/18945/carpics003.jpg

Ess14

11-25-2005, 12:28 PM

hot red x's

blackflag_Rms13

11-25-2005, 12:43 PM

Works for me but here anyways http://forums.nicoclub.com/zerofile/18945/carpics003.jpg and http://forums.nicoclub.com/zerofile/18943/carpics002.jpg

Ess14

11-25-2005, 12:55 PM

"File attachments can only be linked from the message board server; Outside linking is not allowed.

Your referrer: http://www.zilvia.net/f/showthread.php?p=865763#post865763"

theicecreamdan

11-25-2005, 04:49 PM

the image URL takes me to nico, and NICO tells me to come back here, I'm lost.

Phlip

11-25-2005, 05:10 PM

the image URL takes me to nico, and NICO tells me to come back here, I'm lost.
Thanks for that, Dan... Your response is what makes me happy I read responses before I click on links.

smily_vigor

11-26-2005, 05:45 AM

wow thats clean!! isnt that the s14.5 from montreal??

Yeah man it is from montreal.

kaje36

11-26-2005, 04:08 PM

http://home.comcast.net/~kaje36/guage/DSCF0418.JPG http://home.comcast.net/~kaje36/guage/DSCF0419.JPG

a few peaple like billklinevt have copied me since I did this.

turknjd

11-26-2005, 05:00 PM

i did that along time ago.
http://img332.imageshack.us/img332/9412/facc7ab73kz.jpg

blackflag_Rms13

11-26-2005, 06:27 PM

mr_240sx

11-26-2005, 06:47 PM

SimpleS14

11-26-2005, 07:53 PM

Alright fuck NICO, this shit is pissing me off... Heres a link to the thread if you don't mind the cross-linking. Mods, you can delete this if you want... http://forums.nicoclub.com/zerothread?id=130552

That looks good...I'd take one without the four gauges, polished finish and if the gauges can read MPH and work with the KA. :D

projectRDM

11-26-2005, 08:43 PM

Alright fuck NICO, this shit is pissing me off... Heres a link to the thread if you don't mind the cross-linking. Mods, you can delete this if you want... http://forums.nicoclub.com/zerothread?id=130552

ACK! Looks like a future HIN recruitee. If the trim panel was finished in textured OE material it'd look a LOT better, that super gloss black is awful. Too much import cool flash. I bet the reflections at night are deadly off that son of a bitch.
Plus it's funny to see OE S15 gauges paired up with cheap, subpar Autometer gauges, seems hypocritical.
But as mentioned, A+ for effort, it's not fun to mold big pieces like that.

Andrew Bohan

11-27-2005, 02:04 PM

here's my new shit
http://www.bohanindustries.com/gayjizz1.jpg
http://www.bohanindustries.com/gayjizz2.jpg

Andrew Bohan

11-27-2005, 03:49 PM

lukes fd http://www.shockdrifting.com/articles/lukefd/5-18.jpg

mr_240sx

11-27-2005, 04:18 PM

lukes fd http://www.shockdrifting.com/articles/lukefd/5-18.jpg
why is his shifter so high?? :goyou:

SpeedMonkeyInc

11-27-2005, 04:47 PM

Driftaholic: what brand gauges are those?

trybal

11-27-2005, 04:50 PM

i like my shifters high, i hate when they are all low and level with the center compartment and what not.. gross

NemeGuero

11-27-2005, 05:17 PM

It's not his shifter, its his e-brake thing-a-majig...

SimpleS14

11-27-2005, 05:30 PM

It's not his shifter, its his e-brake thing-a-majig...

Look at the shifter and where it meets with the center console. I'm guessing the LS1 has something to do with it....

Andrew Bohan

11-27-2005, 05:32 PM

mine are swoosh. luke's are saga. they're really the same company though, but saga is higher end stuff, like defi link.

we got sponsored by them and they sent us hella free shit. we're the first people in the US to have em.

NemeGuero

11-27-2005, 09:06 PM

Oh, well the link for your pic stopped working.
Who was it that did the hard-lock e-brake stuff? I thought that was your FD...

Andrew Bohan

11-27-2005, 09:23 PM

the FD has a CNC staging brake set up to work like an ebrake. all it is is a master cylinder with a long handle instead of a pedal, and only pushing on the rear brakes

NemeGuero

11-28-2005, 03:02 AM

the FD has a CNC staging brake set up to work like an ebrake. all it is is a master cylinder with a long handle instead of a pedal, and only pushing on the rear brakes
Yah, but that wasn't what they were talking about (why is your shifter so high) in the broken link pic?

-usmd-180sx

11-28-2005, 10:35 AM

but i like your old setup andrew... what happened? shit was so tight man.. :bowrofl:

Andrew Bohan

11-28-2005, 12:23 PM

i'm selling those gauges, since i got these ones for free. and these ones won't fit 3-accross in a din sized panel. once i get a daily driver i won't need the climate controls anymore, so i'll just make a panel for em around there i guess. or maybe just leave em up top. they'e easy to see there.

-usmd-180sx

11-28-2005, 01:19 PM

what size were those free gauges?

Andrew Bohan

11-28-2005, 02:04 PM

60mm

yep

mmm hmm

Andrew Bohan

11-28-2005, 02:27 PM

ok shockdrifting.com came back. now i can see what pic luke posted. yeah that shifter is pretty high. we need to make a new one

driftfactory

11-28-2005, 03:37 PM

Here is our set up. It's not complete but you get the idea.

http://www.driftfactory.com/zilgauges.jpg

ni[x]it

11-29-2005, 08:37 AM

that Tach is Da Hotnezz.
Even though it's the same size as stock.
:points and laughs:

Mod for a purpose.

NemeGuero

11-29-2005, 01:00 PM

it']that Tach is Da Hotnezz.
Even though it's the same size as stock.
:points and laughs:

Mod for a purpose.
Idiot, the purpose of an aftermarket tach isn't "SIZE".
It's 1: accuracy (much more accurate than stock also with different redlines and higher rev capabilities)

and 2: shift light

driftfactory

11-29-2005, 04:29 PM

Our stock tach will max out before our new redline.

Modded for a purpose :)

ni[x]it

11-29-2005, 07:10 PM

Our stock tach will max out before our new redline.
Modded for a purpose :)
very nice.
my apologies.

it's just wierd seeing 10 or 12k rpm rpm guages (the size of small children) on pickup trucks and domestics that redline at 3krpm.

Idiot, the purpose of an aftermarket tach isn't "SIZE".
Nice car. Are those stock hubcaps?

NemeGuero

11-29-2005, 07:21 PM

it']very nice.
my apologies.

it's just wierd seeing 10 or 12k rpm rpm guages (the size of small children) on pickup trucks and domestics that redline at 3krpm.

Nice car. Are those stock hubcaps?

I really hope you're trying to be funny. 'Cuz otherwise you're just stupid.
They are stock, but hubcaps?

ThatGuy

11-29-2005, 07:22 PM

ni[x]it, you attempted to talk shit and got called for it. You were wrong then, and you are wrong now for attempting to talk shit to yet another member.
You will not use Zilvia.net as an outlet for your e-thuggery.

Back on topic.

EchoOfSilence

11-29-2005, 09:40 PM

Our stock tach will max out before our new redline.

Modded for a purpose :)
:p details on new redline?

SR240DET

11-30-2005, 12:30 AM

http://img455.imageshack.us/img455/3342/crw15810cj.jpg

where did you get that carpet? i want some...

NemeGuero

11-30-2005, 01:46 AM

ThatGuy

11-30-2005, 04:17 AM

talk to that guy

You can talk to me if you want, but I don't know where to get S14 carpet.

NemeGuero

11-30-2005, 08:10 AM

You can talk to me if you want, but I don't know where to get S14 carpet.

Hahahaha, ah yes! I love it.

Dayne

11-30-2005, 08:38 AM

hellion240sx

11-30-2005, 11:39 AM

like Tits McGee??? anyways nice setups. going outside to start visualizing what th ehell i want and taking measurements and what not. also on the nico forum nothing but red x's :(

mmdb

11-30-2005, 03:36 PM

Probably the nicest 240 interior I've seen. Very clean. I like how you laid aout all the guages etc.

m072514

12-01-2005, 12:25 AM

yeow. that automotion S14 RB26 is clean... but i wanna see a whole site devoted to it. is there one? i know there is a red kouki one that belongs to an alex. the hotness.

reccakun08

12-09-2005, 12:26 AM

some cool ideas seen here.

hellion240sx

12-09-2005, 10:18 AM

man i can't wait to start on this project!

koukispec

12-09-2005, 12:49 PM

anybody know where i can get an A-Pillar tripple gauge pod that is in carbon fiber and will fit defi BF gauges? btw it is goin into a 97 240 thanx

luckie2hav3her

12-09-2005, 04:56 PM

projectRDM

12-09-2005, 09:31 PM

anybody know where i can get an A-Pillar tripple gauge pod that is in carbon fiber and will fit defi BF gauges? btw it is goin into a 97 240 thanx

Why? You want your car to look like fuck?

Dousan_PG

12-09-2005, 10:20 PM

haha damn this is dope i cant wait to get my sr so i can install the gauges where NO ONE HAS DONE IT BEFORE!! MUAHAHA.... and TRUST ME itll look clean and itll be a lot more visible than all the other gauge setups... CANT WAIT CANT WAIT CANT WAIT!! :eek3d:

i bet money you arent the first
if its in the gauge cluster (Becoming cluster) then no you arent
a pillar no
on top of hump..no
in radio center areas..nope
dash nope
glove box nope
on steering wheel..yes but then you'd be a total moron

haha..
out w/ it mysterio!

sdtouge

12-09-2005, 10:25 PM

in sun visor.... nope

lol

Andrew Bohan

12-09-2005, 10:47 PM

in the mirrors!

ThatGuy

12-10-2005, 07:52 AM

Reverse display guages mounted on the rear deck? Then you can see them in the rearview. :loco:

:rofl: :rofl: :rofl:

koukispec

12-10-2005, 10:07 PM

Why? You want your car to look like fuck?
please elaborate on y it would look like fuck? if it looks like fuck to u then fine, but i just asked a simple question, mayb i like it, there are plenty of things in the world that look like fuck, but if the owner of the "fuck" likes it then its all g, so if u dont know then dont trip on my post and just move along, thank you :Ownedd: :mephfawk:

kingsol

12-10-2005, 10:27 PM

where's the stack?

projectRDM

12-11-2005, 09:17 AM

please elaborate on y it would look like fuck? if it looks like fuck to u then fine, but i just asked a simple question, mayb i like it, there are plenty of things in the world that look like fuck, but if the owner of the "fuck" likes it then its all g, so if u dont know then dont trip on my post and just move along, thank you :Ownedd: :mephfawk:

1) Apillar gauges obstruct your outward view considerably. Three of them would block an entire sightline and make you more suseptible to causing accidents.

2) Apillar gauges are harder to read because they're closer to you, requiring your eyes to focus longer when viewing them, taking away from your attention of the road and the things around you.

3) Three gauges stacked on an Apillar looks stupid because the lowest one is on an entirely different plane of sight, as is the top one.

4) Carbon fiber trim may look nice as an accent, but an entire pillar of CF doesn't flow with the rest of the trim, the mating edge to the Bpillar wouldn't match, and the rest of the interior would need similiar accents on either side to look like it was fitted appropriately the car.

5) CF in itself is designed to save weight, but the added material to make the guage cups would offset any weight savings, therefore making it just as heavy as the factory plastic piece.

Shall I go on?

NemeGuero

12-11-2005, 10:16 AM

Haha! damn, ruthless Russ.

blackflag_Rms13

12-11-2005, 04:16 PM

http://www.fastandfuriouseast.com/galleries/kylebennet240sx/bennetts240sx42.jpg

http://www.fastandfuriouseast.com/galleries/kylebennet240sx/bennetts240sx39.jpg

He took out the little driver vents behind the steering wheel and put gauges there...

ThatGuy

12-11-2005, 04:57 PM

^Good idea, but the execution is lacking in my opinion. I have seen gauges molded into that area, and it looks much cleaner then "wedging" them in.

Nan Desu Ka?!

12-11-2005, 05:54 PM

Well said ThatGuy. It would have looked much better if there were more vertical. Good idea though.

hellion240sx

12-14-2005, 12:35 PM

is that a good spot to put the gauges? as in being to close compared to the a pillar pod?

nigel1

12-19-2005, 04:42 PM

I finally found the upload cord for my camera.

I am very pleased with my setup, most definatley. and the relocation of the climate control was easy. it just doesn't fit, so you have to either dremel the climate control, or the bezel. and loosely screw it together. it looks like ass with the bezel off, but nice with it on. pointless carbon fiber owns me. I know there are others that hate it... but I cant get enough... lol. if I could afford to make overlay's for my whole interior I would do it... now after making myself look like a moron, heres my contribution.

http://img.photobucket.com/albums/v218/sykopaath/IMG_3629.jpg

hope you guys like it. I sure do...

God forbid, but I plan on molding air/fuel and oil temp into the bezel around the cluster and I also plan on putting boost and egt into the a pillar... I think it will be great. most will not.

SimpleS14

12-19-2005, 05:15 PM

nigel1 - That's very nice, infact I was looking to do the same setup (sorry haha). Do you mind telling me how you got the gauges to stay in place? I was thinking of fabbing something up using plexiglass.

nigel1

12-19-2005, 05:38 PM

the gauges are held in by the metal brackets that come with them, they are shaped like this... |_| and then the carbon fiber is just cut to fit really snug in there, and then I fabbed up two brackets that rotate to hold the cf panel in place. I used a holesaw to cut the holes as well for added cleanliness, the climate control was just dremeled on the sides to make it the same width as the cdplayer, and all that was loosely screwed together at first and then tightened down, if you do it to your car you will know exactly what I mean by that. for the bezel overlay I removed the ash tray cover and cut off the extra material with the dremel, and used plexiglass from home depot and made the block off for the cigarette lighter, and JB Kwicked everything in place, I then sanded it all smooth and put a quick coat of bondo over everything, and sanded that smooth. then I spraypainted it all black and made a template for the carbon fiber. I then traced it to the cf sheet and cut it out and attatched it to the original bezel. I used a holesaw to make the new 12v outlets, that I purchased at radioshack to power my radar detector and my cellphone charger or G-tech or whatever. the outlets were 6 bux a piece and come with nice built in plugs so when nothing is plugged in it looks super clean still. I think thats about it. :)

SimpleS14

12-19-2005, 07:41 PM

Sounds like alot of work you did there, came out very nice. Thank you for the post. :)

nigel1

12-20-2005, 12:19 AM

no prob mang... its really not that much work. the gauge installs and the fabrication took me about a day and a half.

hellion240sx

12-25-2005, 12:22 AM

looks great man. ya'll keep the pix coming!

mrmephistopheles

01-03-2006, 10:37 PM

http://img490.imageshack.us/img490/3406/dash0qd.jpg (http://imageshack.us)

Note location of SpongeBob Air freshener

Dousan_PG

01-03-2006, 10:45 PM

yes kevin baller status. that shit is rad.
defi BF rules!

mrmephistopheles

01-03-2006, 10:52 PM

yes kevin baller status. that shit is rad.
defi BF rules!

Yes, the SpongeBob = baller!!
I'm loving the BF and Rapfix.

ninjai

01-04-2006, 07:34 AM

upSLIDEdown

01-04-2006, 10:29 AM

I agree. That's what I've been planning on doing in my S13. My KA-T project is moving along now and I should have gauges sometime in the not so distant future. Planning on moving the a/c / heater controls down like that too, that way the gauges will be more in the normal sight line. I was gonna put them under the headunit but that's way too low to be looking at while driving. Thanks for the pics Nigel! Anyone done this in an S13 yet? Just curious if the controls fit down there without major surgery. I have no problem trimming things, that's for sure. Dremel 4 teh w1n!

CleanS14

01-04-2006, 01:54 PM

From the old hag... Defi BF Boost, Oil Pressure and Water Temp. Boost on the steering column custom mount, Oil Pressure and Water Temp in the useless cup holder/opening on the center console. Turbo Timer where the blank/security light would go and 911 light and defroster buttons relocated over.
http://www.onetongarage.com/jays14/forsale/interior.jpg

W/O the steering wheel so you can see it better...
http://www.onetongarage.com/jays14/forsale/interior1.jpg

caturboninja

01-05-2006, 12:59 AM

wow everybody has awesome setups this is my shitty one. my 60mm gauges havent come yet. so my shitty ones sit in the ac contol slot!

http://i24.photobucket.com/albums/c46/caturboninja/guages.jpg

YucA

01-05-2006, 10:30 AM

http://pics.shorty.org/files/12/omori.jpg

driftah

01-12-2006, 11:20 AM

http://img490.imageshack.us/img490/3406/dash0qd.jpg (http://imageshack.us)

Note location of SpongeBob Air freshener

what kind of hub and quick release is that?

DJPimpFlex

01-13-2006, 04:13 AM

^ thats is one of the nicer hub/quick releases I've sceen. +1 to a lot of people for nice gauge set ups. I gotta post mine soon.

vik

01-13-2006, 09:11 AM

is pretty basic, but it gets the job done :)

http://xs63.xs.to/pics/06025/ins.jpg

Chrischeezer

01-13-2006, 10:56 PM

http://myspace-188.vo.llnwd.net/00424/88/11/424561188_l.jpg

-maybe because its mine i think its the best lookin interior.. what do u ppl think?

DTS

01-15-2006, 09:07 AM

http://img.photobucket.com/albums/v216/JDMHippo/Hippo/Inside1.jpg

avcr on the left on the dash
safc-2 under the deck

turbo2nr

01-15-2006, 10:51 AM

what did you do to make your gauges light up like that? what bulbs are under the dash cluster, im assuming those are import intelligence bulbs and needleS?

thanks

driftsilvias13

01-15-2006, 12:48 PM

looks like LED bulbs to me

turbo2nr

01-15-2006, 12:50 PM

whats the size for s14 dash cluster?

i know it has to be wedge bulbs right?

nsn240

01-15-2006, 02:56 PM

where do you pick up led bulbs for the guages?

driftstyre

01-15-2006, 04:03 PM

http://www.dentsport.com/bill240/guages.jpg

ThatGuy

01-15-2006, 04:47 PM

where do you pick up led bulbs for the guages?

www.superbrightleds.com as was discussed in a Thread dedicated to strictly changing Guage light colors. In other words, Search! :rofl:

turbo2nr

01-15-2006, 04:53 PM

does anyone know the bulb number for s14 cluster?

mr_240sx

01-15-2006, 08:08 PM

http://img.photobucket.com/albums/v216/JDMHippo/Hippo/Inside1.jpg

avcr on the left on the dash
safc-2 under the deck
DAMM BRO!!!! that cluster looks awesome and really really bright!

FallbrookS13

01-15-2006, 09:20 PM

http://www.dentsport.com/bill240/guages.jpg

damn you have your dash held in by Dzus fasteners. that is freakin awesome!:rawk:

and what is goin on with the plates welded on your floor? just reinforcement or other things happening here?

edit..... o my god. i just now have found the pics/info of your car. i cant believe it.

nigel1

01-16-2006, 03:41 AM

Um.... Thanks for posting them.... :hammer: lol :rofl:

could you please?

whooha1217

02-09-2006, 03:19 PM

http://kahren.net/media/!pics!/PROJECTS/!DYNO!/euston's%20s13/IMG_0730.JPG

http://kahren.net/media/!pics!/PROJECTS/!DYNO!/euston's%20s13/IMG_0731.JPG

http://kahren.net/media/!pics!/PROJECTS/!DYNO!/euston's%20s13/IMG_0754.JPG

http://kahren.net/media/!pics!/PROJECTS/!DYNO!/euston's%20s13/IMG_0756.JPG

http://kahren.net/media/!pics!/PROJECTS/!DYNO!/euston's%20s13/IMG_0757.JPG

Maeda

02-09-2006, 04:19 PM

http://img.photobucket.com/albums/v140/Maeda/buringu4.jpg

Yes thats real. Yes I killed a polar zebra for its pelt. Yes i'm on PETA's top 10.

mrmephistopheles

02-09-2006, 06:56 PM

what kind of hub and quick release is that?

Sorry I never responded.
It's a Works Bell Rapfix (1st gen).
Basically, the one everyone copied.

Maeda

02-09-2006, 08:28 PM

It's a Works Bell Rapfix (1st gen).

Basically mrmeph is a big baller.

S13SilviaGirl

02-10-2006, 02:49 AM

Basically mrmeph is a big baller.
Basically he got it dirt cheap at UpGarage...hahaha. and his pimp paid for it, cuz ya know the hoe's aint got no $$$:keke: he needs to hit the street to pay me back for that still.

Maeda

02-10-2006, 11:44 AM

YAH! Take that!

JDMark

02-10-2006, 08:14 PM

http://img.photobucket.com/albums/v640/Blimit/000_0124.jpg
:zzz:

SilviaNinja240

02-10-2006, 08:27 PM

http://img.photobucket.com/albums/v140/Maeda/buringu4.jpg

Yes thats real. Yes I killed a polar zebra for its pelt. Yes i'm on PETA's top 10.

Nice pajamas :)

po1z5che__

02-11-2006, 07:07 PM

http://img.photobucket.com/albums/v510/240sxy/gauges.jpg

blackflag_Rms13

02-11-2006, 11:14 PM

Found on other forum, cool place to put a wideband...

http://i24.photobucket.com/albums/c33/tunedis95/144_4432.jpg

Still has the little thing to cover it up...

http://i24.photobucket.com/albums/c33/tunedis95/144_4428.jpg

http://i24.photobucket.com/albums/c33/tunedis95/144_4422.jpg

SilviaNinja240

02-12-2006, 06:00 AM

Only 4 Miles!?!?!?!?!

AllenRPS13

02-12-2006, 06:29 AM

i guess the guy swap the cluster... it's impossible, haha!

Maeda

02-12-2006, 10:37 AM

Nice pajamas :)

Thanks. You should see the awesome ones with the polar bears.

WideS13

02-22-2006, 09:33 AM

I was thinking of getting a Defi dash mount pod for the wrx sti. I was looking at one a guy has at work and it looks like it would blend in nicely with an S13. It would require some work to get it to sit at the right angle and to mount it cleanly to the dash, but it would be sweet.

chibo

02-22-2006, 12:11 PM

Only 4 Miles!?!?!?!?!
It's really easy to reset the odo, I did it when I converted my 180kph guage to mph.

golfer17

02-22-2006, 02:36 PM

http://memimage.cardomain.net/member_images/10/web/2050000-2050999/2050793_66_full.jpg

Dunkee

02-23-2006, 10:05 AM

I never posted mine from last summer

http://memimage.cardomain.net/member_images/3/web/255000-255999/255381_86_full.jpg

Got some new updates but no pics yet

SoCalS14

02-23-2006, 10:26 AM

Hated

Loved

Sold

http://memimage.cardomain.net/member_images/1/web/541000-541999/541422_26.jpg

http://memimage.cardomain.net/member_images/1/web/541000-541999/541422_27_full.jpg

http://memimage.cardomain.net/member_images/1/web/541000-541999/541422_28_full.jpg

da8o8santaclauz

07-13-2006, 09:01 PM

hey, just wondering. what are you guys using to mount gauges where the center a/c vents used to be??? for an s13

CaoBoY

07-14-2006, 03:59 AM

ebay mount shit, sheetmetal, cut that shit out, its not hard.

blu808

07-14-2006, 04:15 AM

Why are we posting pics of 240 interiors?
Heres my old one.
http://www.shockdrifting.com/luke/shockparty%20031.jpg
http://www.shockdrifting.com/luke/shockparty%20034.jpg

Flybert

07-14-2006, 01:31 PM

Check out minute 3:09 in this vid to see my setup.

http://www.youtube.com/watch?v=Sjwz2z86sAY

I use to have greddy gauges mounted in a custom bezel in the center vent but ditched that for something better.

Rittmeister

07-31-2006, 01:55 PM

Basic but functional:

http://i25.photobucket.com/albums/c88/kwstine1/P7310003.jpg

Oil pressure and boost/vac. The box in the middle is a fan controller, and toggles between water temp and oil temp.

And, just for fun:
http://i25.photobucket.com/albums/c88/kwstine1/P7310004-1.jpg

JDM speedo redone to read MPH, JDM tach. Needles redone red :rolleyes:

TipStylez

11-25-2006, 11:15 PM

What the hell do you guys use to make your stock cluster so damn bright?!

mrmephistopheles

11-26-2006, 12:40 AM

http://img490.imageshack.us/img490/3406/dash0qd.jpg (http://imageshack.us)

Note location of SpongeBob Air freshener

Updated:
Nighttime
http://img221.imageshack.us/img221/337/9596xn8.jpg
Daytime
http://img224.imageshack.us/img224/9462/9570pf3.jpg
FEAR THE BADTZ-MARU LANYARD.

xxchurroxx

11-26-2006, 12:56 AM

http://img.photobucket.com/albums/v370/xxchurroxx/My%20Car/q3.jpg

NemeGuero

11-26-2006, 03:35 AM

Please send me more pics of your V-mount setup!! Pretty please?

Full-Lock

11-26-2006, 09:30 AM

http://img.photobucket.com/albums/v370/xxchurroxx/My%20Car/q3.jpg

wow, that is super clean. One of the better looking S14 setups i've seen. Who made that? Got anymore pics?

lucky7

11-26-2006, 10:33 AM

its getting there.
http://img.photobucket.com/albums/v470/danerm3/RB7.jpg

now i have my PFC commander mounted, Apexi TT, and AVC-R mounted also. ill have to get new pics. oh, and i got myself a damn cd player too!

HKSdrift3r

11-27-2006, 09:56 PM

Slightly off topic but... has anyone changed the center console lights (heater control etc) to a different color using LEDS. how is it done? thx!

-George

scottyb

11-27-2006, 11:03 PM

http://i88.photobucket.com/albums/k167/sbernhard83/Interior/Guages005.jpg

http://i88.photobucket.com/albums/k167/sbernhard83/Interior/Guages014.jpg

DrtyRat

11-28-2006, 07:30 AM

Slightly off topic but... has anyone changed the center console lights (heater control etc) to a different color using LEDS. how is it done? thx!

-George
http://www.zilvia.net/f/showthread.php?t=57215&page=4&highlight=led+light
I typed in "led light" in the search bar and it was on the first page....next time search first, ask second

chuy

11-28-2006, 02:37 PM

I did the LED and I think I messed up cause they are not bright at all.

trsilvias13

11-28-2006, 03:59 PM

scottb.. which cluster is that?

scottyb

11-28-2006, 04:33 PM

scottb.. which cluster is that?

r33 gts-t. it fits almost perfectly if you just take out the white piece of plastic above the s14 cluster and just kinda jam it in there, no screws or anything.

I kept the s14 cluster harness and spliced the r33 harness into it so I can switch between the two clusters whenever i want.:rawk:

Ninjabread

11-29-2006, 07:44 PM

^^Km/h ftw...

Dousan_PG

11-29-2006, 10:33 PM

wee
done

http://i29.photobucket.com/albums/c252/dousan/DSC03686.jpg

GSXRJJordan

11-29-2006, 11:08 PM

ughh..... *splat*

Damn Dousan... that IS the cleanest dash this side of a Stack... wow... i need to clean up now.

Ninjabread

12-03-2006, 06:40 PM

Mmm that cluster is a fucking work of art...

iAMprojekt

12-13-2006, 08:07 AM

http://photo1.absee.com.tw/photo/7686/37414/img_1959_t565.jpg
http://photo1.absee.com.tw/photo/7686/37414/img_1957_t565.jpg

i suck at taking pictures....

how / what did you use to mount those 3 gauges where the air vents were....

smelly240

12-13-2006, 10:36 AM

dude... u can buy those anywhere... ebay, make it with a peice of CF and a holesaw, use aluminum... enjuku, HT, optionimports, you name a store - they have em.

CubanPowered

01-27-2007, 06:40 AM

Updated:
Nighttime
http://img221.imageshack.us/img221/337/9596xn8.jpg
Daytime
http://img224.imageshack.us/img224/9462/9570pf3.jpg
FEAR THE BADTZ-MARU LANYARD.

Don't mean to bring it back from the dead but..

what cup holder is that? anybody know?

yokotas13

01-27-2007, 06:51 AM

its a random one from super autobacs
http://farm1.static.flickr.com/169/370575399_bb178033ff.jpg
dont mind the wires. its 2 months temporary

Dousan_PG

01-27-2007, 07:49 PM

holy shit that terible seutp
are you serious?
i dont know why ud put all the gauges there
u only look at them really when done driving.

mrmephistopheles

01-27-2007, 08:20 PM

Don't mean to bring it back from the dead but..

what cup holder is that? anybody know?

You could've PM'd me, but I like this thread and don't want it dead.
I'll go down to the car in a little while and find out.
Aren't I such a nice guy?

edit: it's Carmate model 910 - probably won't be able to find it though.

CubanPowered

01-27-2007, 08:59 PM

thanks man, I appreciate it. Your cars interior is pretty much my fav from the ones posted clean but sophisticated... and that cup holder is just so sick :)

for some reason I can't even get my alpine to sit flush with the stock trim piece ;(

And sorry I brought the thread back, next time i'll PM

smelly240

01-27-2007, 10:43 PM

i had to notch the center peice to get my head unit to fit - since then i've gone radio-less, and put gauges there - and have since removed the stock tach and speedo for some aftermarket gauges similar to dousans old setup. ill get a defi speedo with some hud someday soon as for now i wont know how fast i am goin ;)

i hated to take the die grinder to that center - but a peice of rough sandpaper cleaned it up like perfect ;)

yrk323

01-28-2007, 01:46 AM

wow are you serious with all that shit in the cluster yokota

super whack

you got like 4 different things that tell you the same engine RPM or what

yokotas13

01-28-2007, 02:02 AM

holy shit that terible seutp
are you serious?
i dont know why ud put all the gauges there
u only look at them really when done driving.
its extremely horible

im working on some other kind of setup. not sure exactly what yet

wow are you serious with all that shit in the cluster yokota

super whack

you got like 4 different things that tell you the same engine RPM or what

not so much
only the front one has RPM and speed displayed
the AVCR has throttle, injector, and boost
SAFC has airflow, and battery and somethign else on it...i dunno.
i just need a power fc

yrk323

01-28-2007, 02:20 AM

what is in there exactly

wideband, safc, avcr, rsm?

new wheels look way better, and lol at your taillight center panel

yokotas13

01-28-2007, 02:20 AM

yeah

thats it.

WhiteGLX

01-28-2007, 10:38 PM

http://i42.photobucket.com/albums/e331/sr20goofus/Electrical/PICT0107.jpg

j20accord00

01-29-2007, 01:50 AM

^^^ post more pics or your car, your set up is sweet. do you have a site that you post your pics at that I can take a look them at?

thanks

s13gold

01-29-2007, 02:06 AM

personally i like the ones in place of the air vents!

WhiteGLX

01-29-2007, 05:15 AM

Many more pics of the car of everything can be found here...

http://www.zilvia.net/f/showthread.php?t=90478&page=4 (http://www.zilvia.net/f/showthread.php?t=90478&page=4)

A Spec Products

04-05-2007, 04:52 PM

http://www.rogansan.com/paint/interior2.jpg

Dual 52mm Greddy

Kognition Design carbon honeycomb gauge panel

http://www.kognitiondesign.com/

byebye_sti

04-05-2007, 05:28 PM

Sorry ahead about the lame quality, this pic is old and i couldn't get out to my parts car today to take them out and put them in my DD cause of 11 inches of snow...in april... seriously come on hah. I'll get more pics tomorrow!

3 Autometers in the vents

http://i159.photobucket.com/albums/t158/240sx_sr20det/1111.jpg

the bee guy

04-05-2007, 06:04 PM

$5 piece of scrap ABS plastic from a stereo shop, and a dremel.

http://a538.ac-images.myspacecdn.com/images01/5/l_20e635cf5e7194c77c00a7a8e5bbef29.jpg

TipStylez

04-05-2007, 07:25 PM

^Nice.

1234567890

JDMslide180

04-05-2007, 08:05 PM

Does anyone have the Apexi EL I or II gauges either in white or black phase .... I want to see how they look in the daytime and at night ....

spool_sample

04-06-2007, 06:50 AM

http://www.motor-elite.com/cars/andrew/IMG_3876.jpg

mehsilvia

04-06-2007, 08:35 AM

Piece of balsa wood - $2.75
Faux black suede cloth - $1.75
3M adhesive - $priceless

Apexi AVCR, Pushbutton start, CF Accessory switch

http://i163.photobucket.com/albums/t282/mehsilvia/Interior/Console.jpg

SAFCII is in the glovebox (not like i need to adjust/view all the time) and Greddy TurboTimer is in the ashtray.

cisco240

04-06-2007, 09:07 AM

Here's my set up: Custom dual gauge pod & center console
Autometer Nexus Oil pressure & EGT gauges
http://i60.photobucket.com/albums/h31/cisco240/IMGA0309.jpg

http://i60.photobucket.com/albums/h31/cisco240/IMGA0313.jpg
Greddy E0-1
http://i60.photobucket.com/albums/h31/cisco240/101_0240.jpg
Greddy turbo timer, & Nexus gauge controller in the center console
http://i60.photobucket.com/albums/h31/cisco240/101_0237.jpg

ixfxi

04-06-2007, 11:43 AM

$5 piece of scrap ABS plastic from a stereo shop, and a dremel.

http://a538.ac-images.myspacecdn.com/images01/5/l_20e635cf5e7194c77c00a7a8e5bbef29.jpg

WOW! that looks really nice.

what did you use, a 5 dollar piece of scrap ABS plastic from a stereo shop, and a dremel?

yeah, it really looks like it. nice job.

ixfxi

04-06-2007, 11:45 AM

http://i163.photobucket.com/albums/t282/mehsilvia/Interior/Console.jpg

it doesnt look as bad as the previous post with the 5 dollar ABS plastic. it looks better than that.

but, it still kinda looks like a home made batman costume.

JDMslide180

04-06-2007, 01:57 PM

cisco240

04-06-2007, 08:56 PM

Where did you get the Carbon Fiber trim ? Looks really nice ...

I got it from Kognition Design.

ixfxi

04-07-2007, 12:31 PM

I got it from Kognition Design.

kognition design ROCKS.

mike / clearcorners.com

CylonFrakker

04-07-2007, 01:35 PM

SAFC and Power FC? Why o why?

How about VPC not PowerFC.

kognition

04-10-2007, 12:20 AM

I'm about to pull this out and do some work on it in the next week. Exciting dry non reflective carbon panel dash by yours truly. weighs 2 lb's. :2f2f:
http://kognitiondesign.com/gauge-panel.jpg

JDMslide180

04-10-2007, 06:47 AM

I got it from Kognition Design.

I just checked them out and they have real good quality stuff .... I just didnt see that many int. parts formy s13 ... Thanks for the help man ....

TipStylez

04-10-2007, 01:58 PM

http://pics.shorty.org/files/12/omori.jpg

Whats the brand on thos gauges?

Matches the old ass 240s int nicely.

staygold24

04-10-2007, 02:11 PM

im pretty sure they are omori. could be wrong though.

Full-Lock

04-10-2007, 02:38 PM

ya, im 99% sure they are omori too

kognition

04-11-2007, 10:17 AM

Here are some pics that i was sent this morning from one of our customers in Switzerland, he
had a need to mount multiple components. We recently started making our meter panels with a high strength fire resistant aerospace foam core. Once you cut your pattern out thru the top laminate, the foam core cuts like butter. We also make full S13 and S14 gauge deletes that are water jet cut. Dry carbon finish is so sex.
http://www.mindleads.com/test/share/tmp/carb04.jpg
http://www.mindleads.com/test/interior/P1010164.JPG
http://www.mindleads.com/test/interior/P1010168.JPG
http://www.mindleads.com/test/interior/P1010259.JPG
http://www.mindleads.com/test/interior/P1010264.JPG
http://www.mindleads.com/test/interior/P1010196.JPG
http://www.mindleads.com/test/interior/P1010230.JPG

98koukile

04-11-2007, 09:13 PM

Looks like an M5 gauge cluster

blackej7

04-11-2007, 09:47 PM

nothing special here.

http://www.we-todd-did-racing.com/files/1004370_0u447/quick%20240%20pics%20003.jpg

n2n2i

04-11-2007, 11:35 PM

my personal favorite
http://img337.imageshack.us/img337/9405/stack240sxdashfz7.jpg
*fixed*

SNC240SX

04-11-2007, 11:54 PM

^Cant see the pics unless your a member.

ixfxi

04-12-2007, 09:04 AM

http://www.mindleads.com/test/interior/P1010230.JPG

see, now THATS how interiors should be done.

DRFT180

04-12-2007, 06:00 PM

nothing special here.

http://www.we-todd-did-racing.com/files/1004370_0u447/quick%20240%20pics%20003.jpg

are those 52 or 60mm gauges?

forum04pl

04-12-2007, 06:10 PM

^whats the cluster on the car from switzerland?

blackej7

04-12-2007, 06:27 PM

are those 52 or 60mm gauges?

theyre 60mm. I love em!

fullmetalx

04-13-2007, 01:15 AM

my personal favorite
http://img337.imageshack.us/img337/9405/stack240sxdashfz7.jpg
*fixed*

anyone know what kind of gauge cluster that is?

viscid240

04-13-2007, 01:25 AM

^ looks to be sard stack!!!!!!!

Full-Lock

04-13-2007, 10:09 AM

ya, it is. it also looks to have the sard carbon cluster surround too..fuckin sick

i would really like to see the whole car if the interior is any reflection of the rest of it

kenshinS14sks

04-13-2007, 10:59 AM

the tach is also sard (the thing with the lights and the rmp gauge, etc.)? where could i find one, i wasn't able to find it in google

mr_240sx

04-13-2007, 11:03 AM

the tach is also sard (the thing with the lights and the rmp gauge, etc.)? where could i find one, i wasn't able to find it in google
isnt that custom made?

kenshinS14sks

04-13-2007, 11:59 AM

how about just the triangle electric/analog tach in the middle?

240trainee

04-13-2007, 12:25 PM

It's STACK

www.stackltd.com

mr_240sx

04-13-2007, 02:22 PM

how about just the triangle electric/analog tach in the middle?
that is the stac kgauge cluster as mentioned earlier.

kenshinS14sks

04-13-2007, 02:56 PM

ok thanks...i misunderstood and searched sard gauges...

n2n2i

04-14-2007, 06:23 PM

hey, if you are interested in the cf dash around the stack st8130 I found they are selling them on this website.
http://www.racerwheel.com/sard-67212.html

Oh and just to clarify that is not my car, although I wish it was.

godzillarb

04-14-2007, 06:56 PM

http://i72.photobucket.com/albums/i170/tdi520/100_0757ssssssss.jpg

Little rough, but works for now

Pstl_pete

04-24-2007, 03:54 PM

http://www.mindleads.com/test/interior/P1010230.JPG

Please do tell us a little more about the gauge cluster or a contact for the person that owns the car. That is seriously sick.

ThatGuy

04-24-2007, 04:03 PM

I believe it's already been stated that you can buy trim rings like that on eGay.

statik

04-24-2007, 09:30 PM

I believe it's already been stated that you can buy trim rings like that on eGay.

Yeah just a euro cluster with rings, I have a cluster that goes to 260kmh

kognition

04-24-2007, 09:50 PM

This customer is from Switzerland. Yodelaheehoooo! Thats all i know about it.

Please do tell us a little more about the gauge cluster or a contact for the person that owns the car. That is seriously sick.

steve shadows

04-25-2007, 10:35 AM

I think this is all you need for a car with a standlone, in fact i dont even really use the Boost gauge half the time either.

http://i8.photobucket.com/albums/a6/RPSport/HPIM1046.jpg

yeah thats all ya really need for a 500hp some od car....

no frills for me.

I have a crappy head unit that needs replacing with a good one thats about it.

oh an my pep boys steering wheel feels great at 150 mph.