Dual Cam HIGH pressure PS Line in SS for single cam SR swaps

[JKim0901]

For all those doing a single cam to Dual cam or SR swaps or for those who are sick of busted rubbers. I have a SS PS line made for the job, i had it made when i did my swap awhile back but never got around to making more until now.

This Line will replace the rubber line and the hard like from from PS pump to the rack, it does eliminate the sensor but i havent had any problems with it, nor was my sensor hooked up.

anyways heres some pictures

at the pump
http://i2.photobucket.com/albums/y2/JKim0901/PSline2.jpg

at the rack
http://i2.photobucket.com/albums/y2/JKim0901/PSline3.jpg
http://i2.photobucket.com/albums/y2/JKim0901/PSline0.jpg

http://i2.photobucket.com/albums/y2/JKim0901/PSline4.jpg

Clearance of the intake tube
http://i2.photobucket.com/albums/y2/JKim0901/PSline6.jpg

the High Pressure line at the dealer is like 200-250 and finding one at the junk yard and then taking it out on that greasey ass floor is 30-40 plus if the rubbers bad then the rubber hose at the parts store is another 50-60 bucks, or you can have this one at

$$100 bucks shipped, email me at [email protected]

[iMAGE976]

i c that u finally got it done man, looks nice...but how does the steering feel?? Im sure people are intrested in a little review.....Bump for a good seller!!

[JKim0901]

yea got it done faster than i thought, it feels the same honestly, but im numb to these things. but seriously it feels the same

[FRpilot]

yea looks nice. you should make a write up on what size fittings and line you need.

[tempuraDRIFT]

this high pressure line is nice ! seen it in person and looks great ...

[JKim0901]

still got 3 left

[decksy]

so hawt!! i want one..... stupid hicas pump! i hate you!

[vvtisupra]

this line is wicked 240's are notorious for having leaky rubber ps lines... Get R done right

[tempuraDRIFT]

back from the dead?

[TheArkitekt]

email sent...

[JKim0901]

emails replied

i can also have it made to be a little longer, one guy was concered about it being too short in his RB swap, pm me for details

[JKim0901]

got some more made so back to the top

[soyer]

does this work is a sr with hicas pump? pm me thanks

[JKim0901]

it does NOT work with hicas

[zeek]

still making these?

[OperationSr20]

Lol, late 2005/Early 2006 Thread.....

13 Months since last post....
18 Months since first listed....

[swayray]

he sold two to me and they work GRREAT!... hey Mr. Kim... didn't you say you have a few more of these left?

[D1champ]

If you still make these I would be VERY interested.

[Healtoeae86]

Put mine in today! no more leaks! Thanks!

[driveway ate my lip]

yea man...im sick of busted rubbers too...hahaha

dont hesitate to buy from this guy

[240trainee]

Shits old, MA is selling them now if JKim isn't anymore

http://www.zilvia.net/f/showthread.php?t=149557

[vvtisupra]

$40 bucks cheaper than MA motors... I'm in! JKIM for president!

[Healtoeae86]

hes still selling them. I bought mine last week. Free bump for a cheaper alternative!

[vvtisupra]

hey ash does he have a spare one for my swap ?

[defiantmofo]

these for sale still? pm me, i want one.

[JKim0901]

Shits old, MA is selling them now if JKim isn't anymore

http://www.zilvia.net/f/showthread.php?t=149557

hey guys i can still get more made. but i wont be able to do it for 100 shipped since im not going to make a bunch of them anymore unless there is a request, but judging by the post above MA motorsports seems to be making them.

soooooo, if you guys want one ill do 130 shipped :D so if you want it pm me or email at [email protected] thanks.

[stuntman240]

I can do these for $100 shipped

please Email me at [email protected]
OR
Call me at 319-270-9255, I work 8-5 (central) like most just leave a message and I will get back to you

A good friend of mine works at a custom hose shop, I'll pass the savings to you guys.

Here are pics of the one I made for 1jz in my S14.

http://www.ziptied.com/Coppermine/albums/userpics/10614/P1000139.JPG
http://www.ziptied.com/Coppermine/albums/userpics/10614/P1000140.JPG
http://www.ziptied.com/Coppermine/albums/userpics/10614/P1000141.JPG

[MrChow]

should make it as a group buy

[drift into a curb]

Only $130? Where do I pay!

[JKim0901]

i have one more in my garage, i do still make these if you want, price will be 100 bucks, it was 130 at the time because i was using non-crip/re-useable fittings, but now im using crip -6.

shoot me an email at [email protected] if you want the last one before i make more, i think i sold like 40 of these now. if you bought one chime in!~!

i can make these for the RB guys also, its just needs to be a little longer