can i use supra brake rotors on z32 calipers?

[crazy9ceguy]

can i use the supra brake rotors from the jza80 on the z32 30mm aluminum calipers? is it a bolt on? are the rotors bigger thne the z32 TT ones?

[FRpilot]

i believe they are 12.8 iirc. something around there, but they definitely bigger than z32 rotors. you need an adaptor bracket to mount the calipers further from the spindle to fit the bigger supra rotors. you also posted this thread twice with another name..

[Prok0]

Underground Motorsports makes the caliper bracket ot put it in the right position.
You also need to take the rotors and get the center bore made larger, since it will not fit over the Nissan hub.

[crazy9ceguy]

yea my comp was laggin last night sorry bout that.

[phrozen]

wait till kuah comes out with the bracjket to use z33 track rotors with the z32 calipers

[[email protected]]

wait till kuah comes out with the bracjket to use z33 track rotors with the z32 calipers

Brackets already done :) I'll take some pictures of the kit and update the site by end of the week...

[CHARLIE2020]

Brackets already done :) I'll take some pictures of the kit and update the site by end of the week...

................

[SoSideways]

................

http://www.splparts.com/Parts/S13/Brakes/Upgrades/default.asp

Middle of page................

[andrewmp6]

mckinney did have a kit that used tt supra rotors and the 30mm z32 cailpers

[umsports]

Yep, you can either buy from me for $499 for the kit with rotors...

Or you can buy through McKinney for the same price.....it's the same kit...just pick your vendor...

[BoNyG515]

you can also use some Mustang Cobra Rotors but you will also need an adapter and a hub centric ring...and theyre 13" its in my sig

[CHARLIE2020]

Cobra rotors are 26mm thick so you would need to use 90 Z32 NA calipers.

[andrewmp6]

im gonna use ap racing brakes or the z32 with 350z rotors cant make my mind up

[BoNyG515]

Cobra rotors are 26mm thick so you would need to use 90 Z32 NA calipers.

im actually using the 91 Z32 TT aluminum calipers and 95 Cobra rotors...I saw the setup on a Maxima and bought all of the same parts and they all work

[24Dee]

I've seen people using 3000gt vr4 rotors as well

[cc4usmc]

where did you see that setup BoNyG515? do you have the link? thanks

[BoNyG515]

where did you see that setup BoNyG515? do you have the link? thanks

i didnt see it anywhere online...my friend builds maximas and he had this setup and told me all the parts I needed to buy and he only sold me the hub centric rings and caliper brackets...

[!Zar!]

I've seen people using 3000gt vr4 rotors as well
Best setup IMO. Does require adapters. But here's a link. http://www.zfilms.org/Stories/Z32/2002/01/